525-846063A1 Mercruiser Actuator Kit 846063A1
Fits:
- All Bravo's
- Alpha Gen 1 and Gen 2
- TRS
- Speedmaster 3,4,5
For a complete breakdown of the individual components, click here!
|
|
528-2000 Bravo 1 Hi-Performance Swivel Shaft
This swivel shaft is made from 174-PH stainless steel and is heat treated for maximum strength. This stainless has the corrosion resistance of 304 stainless steel. By using this shaft, the life of your gimbal ring and gimbal housing seal will be greatly increased. This shaft replaces OEM #98230A1 and #866718A01.
Fits: Alpha Gen II, Bravo I, II, III
|
|
525-849996T1 Mercruiser Flushing Kit 849996T1
Fits: Bravo I Performance and Blackhawk Drives with low water pickup.
If you want to run the engine while flushing, you must use this flush attachment on the lower unit. The engine should only run in neutral at an idle speed. For personal safety, the propeller should be removed to prevent contact if accidentally shifted into gear. And never leave a motor unattended while it is running.
Supercedes: 849996A1
|
|
676-18-2724 Gimbal Housing Seal
Replaces: Mercruiser 43713
Fits: Alpha I, Gen II, Bravo
Mallory Marine has the best solution to repair a lower or upper unit after a failure. Made from the highest quality materials our parts are the best in the aftermarket. Everything we make is made to the highest OEM quality standards so they install and shim quickly and easily with out any hassle.
NOTE: Never attempt to install any gears shafts or bearings without using the proper shimming tools to assure a long lasting repair.
|
|
520-05-9988839-00 Hi Performance Bravo & Merc Its Drive Actuator Kit (Port Side Mount Only)
Stainless Marine offers the most complete line of indicator actuators in the business. Our Stainless Marine actuators are designed to give good representation of the device being indicated. Our Stainless Marine actuators are all stainless steel and delrin, with nylon friction washers where necessary. All our Stainless Marine actuators are designed to fit all our cables and popular 33c style.
Kit Includes:
Qty. Description
(1) Hi Performance Bravo & Merc. Actuator Mounting Bracket*
(1) Hi Performance Bravo & Merc. Actuator Arm*
(1) Hi Performance Bravo & Merc. Actuator Bracket
(1) Cable Clamp Mounting Puck
(1) Cable Clamp w/Mounting Screws
(1) Trunnion w/Cotter Pin
(1) Hi Performance Bravo & Merc. Actuator Bracket Mounting Screw
* Port Side Arm & Actuator Mounting only.
|
|
130-1025 New High Performance Mercury Urethane Ram Bushings - Kit Includes All 8 Bushings
Hardin Marine has come up with new urethane ram bushings for Bravo outdrives.
They are packaged in kits. They are available in red only and are
recommended for all boats running over 60 mph. Enjoy increased stability
when you need it!
Each kit comes with 8 Urethane Ram Bushings.
|
|
520-05-9998884-00
Honda Outboard Actuator Kit (Starboard only)
Kit Includes:
Qty. Description
(1) Actuator Mounting Bracket*
(1) Actuator Arm*
(1) Honda Actuating Bracket w/Bushing
(1) Trunnion w/Cotter Pin
* Starboard Side Actuator Mounting Bracket & Arm Assembly only.
|
|
421-BRV-FLUSH Low Water Flush KitThis unit is designed to fit an IMCO lower unit or IMCO nose cone and provides a way to flush water through the engine cooling system to clear salt residue. Note: This item will not fit a stock Bravo with low water pickup.
|
|
520-05-9988827-24
Merc 20″ Offshore Actuator Kit (Stbd Side)
Kit Includes:
Qty. Description
(1) Merc. Offshore Actuator Mounting Bracket for 20” (Stbd.)*
(1) Merc. Offshore Actuator Arm for 20” (Stbd.)*
(1) Merc. Offshore Actuating Bracket for 20”
(1) Trunnion w/Cotter Pin
* Starboard Side Arm & Actuator Mounting Bracket.
|
|
520-05-9988827-00
Merc Standard Actuator Kit (Port Mount)
Kit Includes:
Qty. Description
(1) Merc. Std. Actuator Mounting Bracket (Specify Port or Starboard)*
(1) Merc. Std. Actuator Arm (Specify Port or Starboard)*
(1) Std. Actuating Bracket
(1) Merc. Std. Actuator Mounting Tab
(1) Cable Control Boot
* Specify Port or Starboard Side Arm & Actuator Mounting Bracket.
|
|
520-05-9988827-01
Standard Single Outboard Indicator System
Kit Includes:
Qty. Description
(1) Merc. Std. Actuator Mounting Bracket
(1) Merc. Std. Actuator Mounting Tab
(1) Merc. Std. Actuator Arm
(1) Merc. Std. Actuating Bracket
|
|
520-05-9988827-20
Merc. Offshore 20” Outboard Actuator Kit (Port or Starboard)
Kit Includes:
Qty. Description
(1) Merc. Offshore Actuator Mounting Bracket for 20” (Port)*
(1) Merc. Offshore Actuator Arm for 20” (Port)*
(1) Merc. Offshore Actuating Bracket for 20”
(1) Trunnion w/Cotter Pin
* Port Side Arm & Actuator Mounting Bracket.
|
|
520-05-9988827-10
Merc. Offshore 15” Shorty Outboard Actuator Kit (Port only)
Kit Includes:
Qty. Description
(1) Merc. Std. Actuator Mounting Bracket for 15” Shorty (Port side only)*
(1) Merc. Std. Actuator Arm for 15” Shorty (Port side only)*
(1) Cable Clamp Mounting Puck
(1) Long Shaft with nut for Merc. Offshore 15” Shorty
(1) Short Shaft for Merc. Offshore 15” Shorty
* Port Side Arm & Actuator Mounting Bracket only.
|
|
520-05-9988836-00
Mercury Verado Actuator Kit (Starboard only)
Stainless Marine offers the most complete line of indicator actuators in the business. Our Stainless Marine actuators are designed to give good representation of the device being indicated. Our Stainless Marine actuators are all stainless steel and delrin, with nylon friction washers where necessary. All our Stainless Marine actuators are designed to fit all our cables and popular 33c style.
Kit Includes:
Qty. Description
(1) Merc. Verado Main Bracket Assembly w/mounting screws*
(1) Merc. Verado Upper Clamp Bracket Assembly
(1) Merc. Verado Cable End Connector
(1) Merc. Verado Plastic Spacer
* Starboard Side Main Bracket Assembly only.
|
|
520-05-9998887-00
OMC/Johnson/Evinrude/Bombardier Actuator Kit (Starboard. only)
Kit Includes:
Qty. Description
(1) Actuator Mounting Bracket*
(1) Actuator Arm*
(1) OMC/Johnson/Evinrude/Bombardier Actuating Bracket w/Bushing
(1) Trunnion w/Cotter Pin
* Starboard Side Actuator Mounting Bracket & Arm Assembly only.
|
|
137-8401 Outdrive Trim Hoses - Long (Priced per Inch)
This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line for longevity of the hose.
- Replaces Mercruiser # 32-861127 and 32-861128
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Stainless End to Connector Block: 7/16-24 IF
- Stainless End to Trim Pump: 3/8-24 IF
- Sold per Inch
- Custom Made per Order
- NO RETURNS
|
|
137-8402 Outdrive Trim Hoses - Long/Short Pair (Priced per Inch)
This is a longer replacement trim pump connector hose kit for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line with a clear rubber protector for easy cleaning and longevity of the hose.
- Replaces Mercruiser # 32-861127 and 32-861128
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Sold per Inch
- Custom Made per Order
- NO RETURNS
|
|
137-8403 Outdrive Trim Hoses - Short Radius (Priced per Inch)
This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line with a clear rubber protector for easy cleaning and longevity of the hose.
- Replaces Mercruiser # 32-861127
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Stainless End to Connector Block: 7/16-24 IF
- Stainless End to Trim Pump: 3/8-24 IF
- Sold per Inch
- Custom Made per Order
- NO RETURNS
|
|
130-1035 Hardin Marine's all new stainless steel trim cylinder end caps are the perfect addition to any Imco, Mercruiser Bravo or Alpha One application.Simple, Stunning. Highly Polished 316L Stainless Steel construction and quick, simple easy to install. Get rid of those cheap stock black plastic caps because your boat deserves better. Sure it's Jewelry or Bling, you pick the term, but isn't your boat worth it? Sold Each. Also available in packs of 4.
|
|
130-1036 Hardin Marine's all new stainless steel trim cylinder end caps are the perfect addition to any Imco, Mercruiser Bravo or Alpha One application.Simple, Stunning. Highly Polished 316L Stainless Steel construction and quick, simple easy to install. Get rid of those cheap stock black plastic caps because your boat deserves better. Sure it's Jewelry or Bling, you pick the term, but isn't your boat worth it? 4-PACK.
|
|