410-WP2508
- -8 AN male fitting.
- Highly Polished Stainless Steel.
- Cut length to match the bottom of your boat.
|
|
410-WP2510
- -10 AN male fitting.
- Highly Polished Stainless Steel.
- Cut length to match the bottom of your boat.
|
|
410-WP2512
- -12 AN male fitting.
- Highly Polished Stainless Steel.
- Cut length to match the bottom of your boat.
|
|
410-WP2516
- -16 AN male fitting.
- Highly Polished Stainless Steel.
- Cut length to match the bottom of your boat.
|
|
410-301102
- -8 AN.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
|
|
410-301103
- -10 AN male fitting.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
|
|
410-WP3512
- -12 AN male fitting.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
- 2" max transom thickness
- 1.250" diameter mounting hole
- 2.5" x 2.5" mounting plate
- 1/4" holes in plates
- -12 inlet
- .600" ID
- 4.375" overall length
|
|
410-WP3516
- The overall length: 4 1/2"
- The mounting flanges are: 2 1/2" square
- The mounting flange is: 1/8 thick
- The bolt pattern is: 1 7/8" square
- -16 AN male fitting.
- Constructed of 316L Stainless Steel.
- Fits many Applications.
|
|
410-1078
- 1" Male NPT fitting.
- 316L Stainless Steel Bracket Style.
- Allows for easy install
and plumbing.
- Race Proven!
|
|
410-1079
- Tube style design allows them to be
tailor-fitted to your application.
- Accepts a standard 1" Male NPT and 1-1/4" inlet hose.
- Easy 3-bolt attachment.
- 9-1/2" Long.
- Cut tube to the length you need.
- 316L Stainless Steel
|
|
410-1094
- Adjustable Tube style design allows them to be
tailor-fitted to your application.
- Accepts a standard 1.25" NPT Female Fitting
- Easy 4-bolt attachment.
- Adjust bolts on bracket to raise or lower pickup
- 316L Stainless Steel
|
|
410-1084-12
- SPECIAL ORDER ITEM - CALL FOR PRICING
- -12 AN Male Fitting
- 316L Stainless Steel Bracket Style.
- Allows for easy install and plumbing.
- Race Proven!
|
|
410-1082
- 1" NPT female port.
- Features an O-Ring Seal.
- Ma from 316L Stainless Steel.
- Pick up can be adjusted for perfect placement.
- Mounting tube has 3" OD
- Pick-up tube has 1-1/4" OD
- Overall Length 7"
|
|
410-1080
- Constructed of 316L Stainless Steel.
- 1-1/4" Push on Hose.
- 6" Length
- Scoops water through a 1-1/4" O.D stainless tube that can be adjusted vertically
- Pick-up may be mounted wherever you want it
- Features an O-Ring Seal.
|
|
410-1086
- Constructed of 316L Stainless Steel.
- 1-1/2" Push on Hose.
- Scoops water through a 1-1/4" O.D stainless tube that can be adjusted vertically
- Pick-up may be mounted wherever you want it
- Features an O-Ring Seal.
|
|
410-1091
- Constructed of 316L Stainless Steel.
- True mandrel bent 2" tubes allowing for virtually unrestricted water flow directly to the boats sea strainer.
- Each individual inlet can be adjusted by loosening a single bolt and raising or lowering the inlet scoop.
|
|
421-04-6090 Transom Mount Water Pickup-10 male fitting Cut to length pickup, is ideal for inner coolers. Mounts to the transom by 3 screws (not included).
|
|
421-04-6040 Water Pickup
To view and download the PDF dimension sheet CLICK HERE
1 1/4" push-on, adjustable pickup. Just loosen the two bolts to adjust for any amount of pressure. Designed to mount to the transom with 4 screws (not included).
|
|
421-04-6060 Ballast Tank Pickup.1 1/4" push-on Ballast tank pickup. Designed for use where a ballast tank is needed. Can be cable operated with a 33C cable or equivalent.
|
|
421-04-6020 Offshore Water Pickup
To view and download the PDF instruction sheet CLICK HERE
1 1/4" push-on is a transom mount offshore design pickup. This bolts to the transom with 4 screws (not included), designed to mount no lower than a 1/4" below the bottom of the boat.
|
|
