462-9-0350004DPC "Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"." Hose: 5/8", Flange: 1-1/2", Max Hull Thickness: 1-1/16" Sold: Each
|
|
462-9-0350004DPP "Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"." Hose: 5/8", Flange: 1-1/2", Max Hull Thickness: 1-1/16" Sold: Each
|
|
462-88-1350586B Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. ID: 5/8", Length: 50'
|
|
462-38-32019 Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS. Hose: 5/8" ID , Thread: 3/8" NPTF Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
780-1030
- 5/8" Slip-On
- Outer Diameter 1.47"
- Overall Length 2.70"
- Polished Stainless Steel
- Stainless Steel main body and flange.
- Includes nut and gasket.
|
|
780-1000
- 5/8" Slip-On
- Outer Diameter 1.57"
- Overall Length 1.85"
- Polished Stainless Steel
- Stainless Steel main body and flange.
- Includes nut and gasket.
|
|
780-285 5/8 Bilge Thru Hull White
- Color: White
- Hose Size: 5/8"
- Flange OD: 1-1/2"
- Thread Length: 1-5/8""
- Overall Inside Length: 2-7/8"
- Quantity: Sold Individually
Molded white plastic with broad flange. For use with 5/8" Hose. Not recommended for use below the waterline.
|
|
462-88-1200586B For bilge pump discharge applications. Single layer corrugated polyethylene. Resistant to: mild chemicals, salt water. Clamping cuff every foot. Do not attach to thru hull fitting below the water line. ID: 5/8", Length: 50', Color: Black
|
|
462-88-1500586 For sink, shower, cooler, refrigerator and live well drain lines. Also supply line for non-pressurized water system. Made of FDA approved single layer vinyl non-toxic compound. Not recommended for hot water or pressurized systems. ID: 5/8", OD: .110", Length: 50', Working Pressure: 40# (70° F) Shields Clear PVC Tubing has a single layer FDA formula vinyl. This hose is primarily used for nonpressurized potable water system supply and drain lines (sink, shower, icebox). This hose is NOT for use in hot water or pressurized water systems.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "NM models feature a UV resistant white cover which make the unit weatherproof when closed.
SS models have a gasketed, self-closing cover, making it watertight when fastened.
Mounting holes on all units are 2-3/8" on center. Mounting screws and gasket are provided." Rating: 50A 125/250V, Material: White non-metallic Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Vinyl jacketed. Completely factory pre-wired with molded-on devices. Connector end has a threaded sealing ring for making the inlet/connector interface watertight.
LED models have two high density LED indicator lights. Bright green indicates "power on"." Rating: 50A, 125/250V, Length: 50', Color: White Sold: Each
|
|
462-167-SRC50 50' RG58 Cable Kit for SRA30
Description: Cable Kit 50' F/SRA30
|
|
462-189-22502 "Features an efficient, water-cooled motor with greater torque and less power consumption; a tough resin housing which resists shock, detergents, fuel and corrosives; a rugged impeller and a quick release bracket. 4 3/8" high. 3-Year warranty." GPH: 500, Hose: 3/4", Volts: 12, Amps: 2.5 Sold: Each
|
|
462-220-HD50000101 "The fixed mount jack with drop leg is suited for the heavy-duty applications. This square tube jack fits trailer frames up to 3" x 5". Bolt on style and includes all mounting hardware." Max Load: 5,000 lbs. Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Vinyl jacketed. Completely factory pre-wired with molded-on devices. Connector end has a threaded sealing ring for making the inlet/connector interface watertight.
LED models have two high density LED indicator lights. Bright green indicates "power on"." Rating: 50A, 125/250V, Length: 50', Color: Yellow Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Fully molded, watertight design. Female (Boat): 30A 125V
Twist Lock, Male (Dock): 50A 125V
Twist Lock, Color: Yellow Sold: Each
|
|
462-180-59235 High temperature. Locks and seals threaded fittings. Resists leakage, vibrations, loosening, moisture, hydraulic fluids and diesel fuels. Won't shred or wear like thread sealant tape. Size: 50 ml. tube, Case: 6 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The Xtreme Flush Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 1/4” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.
These LED's are for 12 Volt systems ONLY.
5mm Flush Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The
Xtreme Panel Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of
Electro-polished Stainless Steel for maximum corrosion resistance and
easily mount in the dash panel through a 1/4” diameter hole and will
conveniently wire up to your switch to indicate when the switch is on.
They are available in Red and Blue and are wired for a 12V. system.
These LED's are for 12 Volt systems ONLY.
5mm Panel Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Insert the LED thru the drilled hole and push the O-Ring onto the LED
body. Then push the retaining ring onto the LED forcing it to compress
the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
462-37-7812401 Unique ball design allows for higher flow capacities. Perfect for tank selection on larger vessels. Five port construction allows access to four tanks using only one valve.
Features:
Stainless steel lever & nut
RPTFE bearing & packing
Non-Lubricated design
Pointer on handle indicates inlet
Blow-Out proof stem design
Adjustable packing gland
PTFE seats
50 psi pressure rating NOT TO BE USED IN POTABLE WATER SYSTEMS. - Stainless steel lever & nut
- RPTFE bearing & packing
- Non-Lubricated design
- Pointer on handle indicates inlet
- Blow-Out proof stem design
- Adjustable packing gland
- PTFE seats
- 50 psi pressure rating
Size: 1/2" Sold: Each
|
|
