685-68502
-
Fastener Size:
3/8"x16
-
Height:
3.25"
-
Length:
6.25"
-
Mounting Style:
Flush mount
-
Product Material List:
Forged stainless steel
-
Width:
1.5"
-
Weight:
0.94 lb
|
|
462-354-2054001 6" Stainless Strap Hinge
A: 5-7/8", B: 2-15/16", C: 2-15/16", D: 1-1/8", E: 3/16", Pack: 2
|
|
462-35-DP60BW Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed. ID: 6", OD: 8-1/8", Hole: 6-1/2" , Color: White, Center: Smooth Safely store watches, wallets, car keys, glasses, any small items.The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra weight in the bag. Bags are removable for access below deck and to carry ashore.
|
|
462-218-F1W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 6" x 24", Case: 10 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-686-53134F - The Toon Fender is the first fender designed especially for pontoon boats
- It is a complete system - There is no need to buy extra attachment devices or rope
- No need to remove - Double hook attachment will keep the fender from rolling around or popping up
- Protects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders would
- Protects above th attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catch
- Tapered design - The shape of this fender sheds water and other objects off or away from the boat
- Thin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachment
- Over 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4 to 5 inches below the floor trim, or can be adjusted to protect the pontoons themselves.
Size: 6" x 36", Color: Beige - The Toon Fender is the first fender designed especially for pontoon boats. It is a complete system - There is no need to buy extra attachment devices or rope.
- No need to remove - Double hook attachment will keep the fender from rolling around or popping up
- Protects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders would
- Protects above the attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catch
- Tapered design - The shape of this fender sheds water and other objects off or away from the boat
- Thin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachment
- 6 x 24" Mini Fender: 24" long works great on low rails or pontoons that the fencing is all the way to the front of the pontoon.
- 6 x 36" Fender Models: Over 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4 to 5 inches below the floor trim, or can be adjusted to protect the pontoons themselves.
|
|
462-383-1000111 They are the original and most copied FRP wet muffler in the marine industry. Designed for gasoline or diesel engines, minimizes added back pressure, and will not rust or corrode. Constructed of fire retardant, self extinguishing resins. For use above the waterline. Ports: 6", Dia.: 12.20", Length: 41.50" Sold: Each
|
|
462-218-HTM1B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 6.3" x 15.5", Color: Blue, Boat Size: Up to 30', Case: 6
|
|
462-218-HTM1BLK - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 6.3" x 15.5", Color: Black, Boat Size: Up to 30', Case: 6
|
|
462-218-HTM1W - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 6.3" x 15.5", Color: White, Boat Size: Up to 30', Case: 6
|
|
462-218-G4BLK - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Black, Boat Size: 20-30', Case: 6
|
|
462-218-G4B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Blue, Boat Size: 20-30', Case: 6
|
|
462-218-G4BURG - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Burgundy, Boat Size: 20-30', Case: 6
|
|
462-218-G4CR - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Classic Red, Boat Size: 20-30', Case: 6
|
|
462-218-G4CB - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Cobalt Blue, Boat Size: 20-30', Case: 6
|
|
462-218-G4FG - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Forest Green, Boat Size: 20-30', Case: 6
|
|
462-218-G4S - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Sand, Boat Size: 20-30', Case: 6
|
|
462-218-G4T - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Teal, Boat Size: 20-30', Case: 6
|
|
462-218-G4W - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: White, Boat Size: 20-30', Case: 6
|
|
462-218-G4Y - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 6.5" x 22", Color: Yellow, Boat Size: 20-30', Case: 6
|
|
215-OL-EB-7 6.6" Oldsmobile V8 External Balance
All steel dampers have an alloy steel inner hub and an inertia ring machined
from cold-drawn carbon steel tubing In almost all instances, this assembly
weighs less than OEM damper All steel dampers are ideal for performance
applications and racing classes In order to provide the proper counterweight
mass, dampers for all externally balanced engines must be all steel
construction Through careful design and computer controlled machining,
externally balanced dampers are also the lightest available for these
applications.
|
|
