462-167-5228 "Are heavy duty and constructed of high quality fiberglass. 1-1/2" diameter. Features 1"-14 thread (upper male, lower female) stainless. Requires 408R upper support bracket."
Length: 96", Mount: #409, #410
|
|
462-122-RP8 "Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation." Size: 8", Hole: 5/8", Reinforcing Tube: Yes, Case: 20 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Nickel Plated Brass. 12V, 180 mA LEDs: 8, A: 1-3/4", B: 3/8", Watts: 30W, Candle Power: 900 Sold: Pack
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> 6 LEDs. Nickel Plated Brass. 12V, 180 mA. All Around LED Festoon is for interior installations only. LEDs: 8, A: 1-9/16", B: 3/8", Watts: 0.7, Case: 10 Sold: Each
|
|
462-1-HO5108 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 8', Box: 2 Sold: Box
|
|
462-167-5206N "End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C: Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system." Length: 8', Ferrule: Nylon Sold: Each
|
|
462-9-0545DP8ALU Plain aluminum. Length: 8" , Base: 2-5/8" x 1-7/8", Line Size: Up To 5/8", Fastener: 1/4", Pack: 1
|
|
462-390-4134 + Option(s) Scandvik has re-designed the ever popular LED Scan-Strip with newer & brighter LED technology. The SMD2835 LED provides more illumination with low power draw. Mount the LED Scan-Strip anywhere you want more illumination and better visibility, in wet or dry locations. USCG Certified Ignition Protected (SAE J1711).
LED Color: White,Blue,Red or Green LEDs: 17, Length: 8", Volts: 12
Sold: Each
|
|
462-9-0066DP4PLB Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 8" x 5-1/8", Max Thru-Hull: 2" Cast bronze. Screw size is #8. UL Listed.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-218-F2W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 8.2" x 25", Case: 10 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-218-F3W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 8.2" x 30", Case: 10 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-383-1500009 Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline. A1: 2, A2: 2, B: 2.5, D: 8.36, F: 2, H: 8 Sold: Each
|
|
462-218-HTM2B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 8.5" x 20.5", Color: Blue, Boat Size: 25'-45', Case: 4
|
|
462-218-HTM2BLK - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 8.5" x 20.5", Color: Black, Boat Size: 25'-45', Case: 4
|
|
462-218-HTM2BUR - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 8.5" x 20.5", Color: Burgundy, Boat Size: 25'-45', Case: 4
|
|
462-218-HTM2CB - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 8.5" x 20.5", Color: Cobalt Blue, Boat Size: 25'-45', Case: 4
|
|
462-218-HTM2W - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced tube ends
- Designed for use in medium duty applications in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
Size: 8.5" x 20.5", Color: White, Boat Size: 25'-45', Case: 4
|
|
462-218-G5BLK - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 8.8" x 26.8", Color: Black, Boat Size: 25-40', Case: 4
|
|
462-218-G5B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 8.8" x 26.8", Color: Blue, Boat Size: 25-40', Case: 4
|
|
462-218-G5BURG - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 8.8" x 26.8", Color: Burgundy, Boat Size: 25-40', Case: 4
|
|
