This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Fully molded, watertight design. Female (Boat): 30A 125V
Twist Lock, Male (Dock): 50A 125V
Twist Lock, Color: Yellow Sold: Each
|
|
462-180-59235 High temperature. Locks and seals threaded fittings. Resists leakage, vibrations, loosening, moisture, hydraulic fluids and diesel fuels. Won't shred or wear like thread sealant tape. Size: 50 ml. tube, Case: 6 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The Xtreme Flush Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 1/4” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.
These LED's are for 12 Volt systems ONLY.
5mm Flush Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The
Xtreme Panel Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of
Electro-polished Stainless Steel for maximum corrosion resistance and
easily mount in the dash panel through a 1/4” diameter hole and will
conveniently wire up to your switch to indicate when the switch is on.
They are available in Red and Blue and are wired for a 12V. system.
These LED's are for 12 Volt systems ONLY.
5mm Panel Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Insert the LED thru the drilled hole and push the O-Ring onto the LED
body. Then push the retaining ring onto the LED forcing it to compress
the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
462-37-7812401 Unique ball design allows for higher flow capacities. Perfect for tank selection on larger vessels. Five port construction allows access to four tanks using only one valve.
Features:
Stainless steel lever & nut
RPTFE bearing & packing
Non-Lubricated design
Pointer on handle indicates inlet
Blow-Out proof stem design
Adjustable packing gland
PTFE seats
50 psi pressure rating NOT TO BE USED IN POTABLE WATER SYSTEMS. - Stainless steel lever & nut
- RPTFE bearing & packing
- Non-Lubricated design
- Pointer on handle indicates inlet
- Blow-Out proof stem design
- Adjustable packing gland
- PTFE seats
- 50 psi pressure rating
Size: 1/2" Sold: Each
|
|
464-753864-1 Trailer Plug Adapter 7 to 5 Seadog 5-Wire Trailer Wire Accessories are made of injection molded PVC. The trailer plug and trailer plug kits come with 12" of wiring.
|
|
464-08000K 6 Blade Sherwood Impeller Kit
- 6 blade impeller
- 9/16" diameter
- 3/4" width
- Gaskets included
- Replaces: Kohler 359978, Onan 132-0415
|
|
462-9-1306DP2CHR Chrome plated zinc alloy with a Black plastic base.
Length: 6", Line Size: "Up To 1/2", Fastener: 1/4", Pack: 1
Sold: Each
|
|
462-158-ST6RBP "Submersible stud mount combination tail lights for under 80" applications." - Passenger side 6-function: stop, turn, tail, rear reflex, side marker, and side reflex
- Driver side 7 function: also includes license illuminator.
Description: 6 Function Tail Light Passenger side, Pkg.: Polypack Sold: Each
|
|
462-11-FS46450 6 Gang 1/4" Stud Type Bus Bar, 150 Amp Gang: 6, Terminal Screw: 1/4"-20 Stud, Amps: 150, Size: 9.25'' x 1.25''
|
|
462-11-FS40420 6 Gang ATO/ATC Fues Block w/Ground Bar
"
- For ATO/ATC fuses
- Interlocking modules snap together
- 1/4" tin plated copper tab terminals
- Rated 30 Amp per circuit, 160 amp max for block
"
Gang: 6, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3-3/4" x 3-1/4"
Sold: Each
|
|
462-359-GS1 Keeps boat free from gulls by continually sweeping the area where they usually land. 70-1/2" long. Folds for convenient storage.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> 6 LEDs. Nickel Plated Brass. 12V, 180 mA. All Around LED Festoon is for interior installations only. LEDs: 8, A: 1-1/2", B: 3/8", Watts: 0.6, Case: 10 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Nickel Plated Brass. 12V, 180 mA LEDs: 6, A: 1-1/2", B: 3/8", Watts: 25W, Candle Power: 800 Sold: Pack
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Nickel Plated Brass. 12V, 180 mA LEDs: 6, A: 1-3/4", B: 3/8", Watts: 25W, Candle Power: 800 Sold: Pack
|
|
462-180-51817 "Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service." Size: 6 ml. tube, Case: 12 Sold: Each
|
|
462-1-HO5106 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 6', Box: 2 Sold: Box
|
|
615-552-220006 -6 Straight HS-79 Hose End Alum.
- Available: (34) Thirty-Four
- Condition: Overstock
|
|
462-9-1231DP0CHR 6" Handle, Chrome/Zinc, 2/Card Size: 6" L x 1-5/16" H , Fastener: 1/4", Pack: 2
|
|
464-401583 LED OVAL LIGHT HORIZ MNT 6" RED
Wesbar Waterproof Rectangle Side/Clearance Lights feature a snap lock base mount.
|
|
