Generic

IVory PERKO-Kote zinc alloy. Double contact bayonet socket. Black vinyl mounting gasket. Push switch with water resistant boot. 12 volt bulb included.

Size: 5" Dia. x 2" D", Dia.: 6", Fastener: #12 RH

Sold: Each

"Designed to quickly transfer heavier lubricating oils

• Allows lubrication of lower units direct from 5-gallon pail


• Sturdy construction for years of reliable service life


• Contains a 96" hose with a 3/8"-16 threaded fitting

• Allows lubrication of lower units direct from 5-gallon pail


• Sturdy construction for years of reliable service life


• Contains a 96" hose with a 3/8"-16 threaded fitting

:

Sold: Each

5 Gang Screw Type Bus Bar, 150 Amp

Gang: 5, Terminal Screw: 8-32 Screw, Amps: 150, Size: 4.13'' x .75''

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 5", Hole: 5/8", Reinforcing Tube: No, Case: 24

Sold: Each

A double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. Screw size is 12 R.H.

Dia.: 6", Depth: 2", Volts: 12

Sold: Each

5 Volt Circuit Board

This part is used in conjunction with Mayfair LED Trim Indicators

5" Aluminum Heat Exchanger / Oil Cooler Cradle Mounting Clamp

• Stainless steel strap & bolt

Chrome plated cast bronze.

Size: 5", Fastener: #6

Sold: Each

Size: 5" OD, Max Thru-Hull: 2"

Size: 5" dia., Max Thru-Hull: 1-1/2"

5" Volvo Oil Cooler

• Core diameter: 2"
• Core length: 5"
• Fitting thread: 3/8" NPT
• Fittings included: 90-degree with 3/8" hose barb
• Water hose barb: 1"

5" X 23" Copper Nickel Heat Exchanger

Same as:
• 542-119574-44011
• 542-119575-44010

5" X 23" Copper Nickel Heat Exchanger

Same as:
• 542-119574-44010
• 542-119575-44010

5" X 23" Copper Nickel Heat Exchanger

Same as:
• 542-119574-44010
• 542-119574-44011

5" x 27" Cummins Replacement Heat Exchanger

5" x 27" Cummins Replacement Heat Exchanger

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

OD: 5" to 6", Length: 14"

Sold: Each

Replaces: OMC 987811 & Volvo 3854190-0
Permanent magnet
12 volt

Description: New, Rotation: CW

Sold: Each

5.2 GPM Wash Down Kit 70 PSI, 24V

GPM: 5.2, Volts: 24

Sold: Each

"These 5-chamber diaphragm pumps feature dramatically lower noise and water pulsation compared to 3- or 4-chamber designs. They are self-priming to 6.5' (8.2' for 5.2 gpm model), have an integrated pressure switch and can run dry without damage. Use an inlet strainer before pump intake. Accumulator tanks are recommended. Connections for 3/8" NPT, 1/2" hose and 1/2" NPT, 3/4" hose."

GPM: 5.2, Volts: 12, Amps: 12.5

Sold: Each