462-88-40040031 Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. ID: 4", Length: 10', Color: White Vinylvent ducting hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
|
|
This Part has options, please click the button below to order.
542-119175-33200 4" x 13" Yanmar CuNi Oil Cooler
Yanmar direct replacement Oil Cooler
- Winter draining of engine block is unnecessary
- Dual zinc anodes prevent electrolysis
|
|
This Part has options, please click the button below to order.
542-119175-39050 4" x 13" Yanmar CuNi Oil Cooler
Yanmar direct replacement Oil Cooler
- Winter draining of engine block is unnecessary
- Dual zinc anodes prevent electrolysis
|
|
462-88-4204000 Used for venting bilge gases and fumes. Where durability and long service life is required. Heavy gauged black PVC hose supported by vinyl coated helical wire. Resistant to ozone, sunlight and weathering. ID: 4", Length: 50' Shields Extra Heavy Duty Vinylvent has an extra heavy PVC wall. It is supported by vinyl coated helical wire and is resistant to ozone, UV, and corrosion. Flame resistant and meets the UL 94V standard. This hose is primarily used for venting of bilge fumes.
|
|
462-88-4024000 Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. ID: 4", Length: 50', Color: Black Vinylvent ducting hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
|
|
462-88-4004000 Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. ID: 4", Length: 50', Color: White Vinylvent ducting hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
|
|
462-383-1200304 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 4" x 4" x 5", Length: 17-1/2" Sold: Each
|
|
462-383-1200516 It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems. OD: 4", Length: 5', Wall Thickness: .138" Sold: Each
|
|
462-383-1200223 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 4" to 5", Length: 12" Sold: Each
|
|
462-239-0057902 Weight: 4.4 lbs., Boat Size: 14'
|
|
462-218-G2BLK - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 4.5" x 15.5", Color: Black, Boat Size: 10-20', Case: 12
|
|
462-218-G2B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 4.5" x 15.5", Color: Blue, Boat Size: 10-20', Case: 12
|
|
462-218-G2BURG - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 4.5" x 15.5", Color: Burgundy, Boat Size: 10-20', Case: 12
|
|
462-218-G2W - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 4.5" x 15.5", Color: White, Boat Size: 10-20', Case: 12
|
|
410-283415 4.5" Clamp On Downturn Exhaust Mufflers Polished 316L (Sold as a Pair)
- Ease of installation
- High quality Stainless Steel construction
- OEM style transom mount
- Straight through design
- Utilizes water to dampen sound
- Designed and flow tested to ensure maximum flow
- Must be 3" to 4" below water line
- Clamp On, J2005 Sound Ordinance Approved
Application:
Universal
|
|
420-904031 4.5IN Select Sound Clamp-On Silencers (Pair)
Gil Select Sound Silencers
Our Gil Select sound Silencer has become the industry standard. And for good reason. Select Sound Silencers let boaters select silenced or unsilenced performance anytime they want, even while running at full throttle. Making the choice is as simple as flipping a switch on your dashboard. With polished stainless steel, they'll continue to look good for a long time to come.
Clamp-On models slide over and clamp to the end of the tailpipe or exhaust tip on the exterior of the boat transom.
Note: Tailpipes are not included
|
|
This Part has options, please click the button below to order.
542-2486301CN 4” Perkins Tandem Cooler
|
|
This Part has options, please click the button below to order.
|
|
462-241-95060 A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model: #40, Weight: 43 lbs., Holding Strength: 1600 lbs., A: 40-3/4", B: 25", C: 22"
|
|
462-62-460R2 All 400 Series spin-on fuel filter/water separators feature a hand (palm) operated fuel priming pump which simplifies service procedures. These filters also feature multiple fuel ports (two inlets and two outlets) and a unitized mounting bracket for installation convenience. Additional 400 Series features include spin-on, high-capacity, Aquabloc®II replaceable filter elements which stop water and removes solid contamination. Also included are spin-on contaminant collection bowls. The clear bowls used with these filters will not discolor from alcohol, additives, or UV light and have a leak-proof, positive seal, self-venting drain for easy servicing. Max pressure 30 psi. GPH: 60, Micron: 2, Ports: 3/8"-18 NPTF", Bowl: Clear, Size: 4.8" D x 4-1/2" W x 11" H" Sold: Each
|
|
