120-8565 Replacement Cap For MSD Distributor
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. This cap comes with an optional wire retainer to lock the wires in place.
|
|
625-7661
- 7-3/4" tall.
- Fits 625-7660 Extreme SS Filter Head.
- 1"-12 thread
- 21 micron.
|
|
755-3533 Replacement Coil Bracket - Polished
|
|
420-913215 Replacement Cotter Pin for Hardin Generation 2 Offshore Sea Strainer - 1/2" Shaft
Designed to fit Hardin Offshore Generation 2 (420-913222) Sea Strainers only.
|
|
620-32515 This kit contains the fittings and bolts to install a pair of manifolds on a big block Chevy Cyclone exhaust system.
|
|
620-32520 This kit contains the fittings, gaskets and bolts to install a single riser on a big block Chevy Cyclone exhaust system.
|
|
755-8011 Replacement Dual Cooler Flywheel Housing - (Bellhousing Only, No Hardware, Gaskets or Hoses)
- Improved upon a proven design by Keith Eickert Performance Products
- Eliminates the problematic traditional water crossover found in factory-style bellhousings, which struggled to deliver enough water to the opposite engine side coolers
- Torsional strengthening ribs added for unmatched strength and durability, addressing a common failure point in factory-style bellhousings on high horsepower applications
- Water is transferred through a 1-1/4" stainless transfer tube crossover system, allowing complete unrestricted water flow to the oil cooler chambers
- Multiple plumbing options from the top, bottom, or back side for single or dual pass cooling configurations
- Cast from 356-T6 aluminum and heat treated prior to CNC machining
- Hardcoat anodized for maximum corrosion resistance
- Includes: Dual cooler flywheel housing only
- All other hardware sold separately
Note: This bellhousing fits Chevrolet engines only. To be used with the Top Mount Starter #620-10060
For Replacement Parts, Click here.
|
|
125-460500 Replacement Exhaust Manifold Adapter Bolt Covers - Pack of 16
This package of replacement covers will help you replace lost of missing ones. These covers are made from 6061-T6 billet
aluminum. Sold in packs of 16.
|
|
620-45761
- Replacement Gasket for 620-45760
- Gasket Only, no hardware included.
|
|
This Part has options, please click the button below to order.
137-9038 Power Steering Filter Element for 137-9037
- Replacment filter element only.
|
|
137-9022 Replacement Filter Only
for Intercooler Fine Mesh Sand & Sea Strainer This unit uses a rugged and durable all stainless steel micron filter element to keep sand and small particles out while still allowing for maximum water flow.
|
|
625-7763 Replacement inlet fitting for Hardin thermostatic oil adapters, 625-7703, 625-7704.
|
|
420-4000
- Replacement Fittings and Hose for Hardin/Gil Manifolds
- Kit does not come assembled.
- All Hardware 316L Stainless Steel
- Kit is for one manifold.
|
|
755-5922 Replacement Fuel Pump Fitting -8 JIC to 5/8"-18
|
|
680-204G Plastic Undercover Cup For Stainless Pop-up Bow Lights
For use with 680-204-M, Pop-Up Bow Light.
|
|
620-45754 Replacement gasket for breather models 620-45756 and 620-45757.
|
|
137-9549
Used to mount Mayfair wing plates. SOLD EACH!
|
|
420-913014 Replacement hardware kit for Hardin Marine Cast Aluminum Battery Boxes. Fits #420-913010 and #420-913027.
|
|
130-1015 This is a replacement clip for the attaching the hose to the cap on Hardin Marine Sport-Tech Drive Showers.
|
|
410-1506 This hose is a replacement hose for the one included in the 620-300100 Crossover Kit. 9" overall length on the long run, 4" overall length on the short run
|
|
500-1010 Replacement Impeller for 3/4" Magnaflow Water Pump
This is a 12 vane impeller for use with the 3/4" Magnaflow water pump. 500-1007 O-Rings Sold Separately. Measures 1-5/8" tall and 2-5/8" across.
|
|
625-4011
- Replaces Impellers on Hardin Ram Force, Multi-Stage, Lifetime Series Pumps.
- D Shaped Shaft AKA "Single Flat"
- 8 Vane Impeller
- Replacement Impeller For Mercury OEM Sea Pumps
- Replaces OEM Mercruiser # 47-59362T1
|
|
620-913225 Replacement Knob Only for Hardin Offshore Sea Strainers
Designed to fit Hardin Offshore Generation 1 & 2 (420-913222) Sea Strainers only.
|
|
420-913212 Replacement Knob O-Ring or Hardin Offshore Sea Strainers
Designed to fit Hardin Offshore Generation 1 & 2 (420-913222) Sea Strainers only.
|
|
855-L4 Replacement Kill Switch Lanyard
Replacement ignition kill switch lanyard fits 525-368100, 525-368101 and
525-301104. Also Replaces Mercury #8M0092847
|
|
420-913213 Replacement Long Spacer for Hardin Generation 2 Offshore Sea Strainer
Designed to fit Hardin Offshore Generation 2 (420-913222) Sea Strainers only.
|
|
130-1038 Replacement low profile drive shower hose for all Hardin Sport Tech drive showers.
Does not fit Bravo 3 applications.
|
|
