Oil Coolers - Flywheel Housing Oil Coolers

13 Plate Stainless Steel Oil Cooler Kit (Port)
Your Price:
$519.99

13 Plate Stainless Steel Oil Cooler Kit (Port)

755-8020

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Port)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017


13 Plate Stainless Steel Oil Cooler Kit (Stbd)
Your Price:
$519.99

13 Plate Stainless Steel Oil Cooler Kit (Stbd)

755-8022

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Starboard)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, Cast aluminum oil cooler cover plate, billet jam nuts, bolts and gasket.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018


15 Plate Stainless Steel Oil Cooler Kit (Port)
Your Price:
$749.99

15 Plate Stainless Steel Oil Cooler Kit (Port)

755-8029

15 Plate Stainless Steel Oil Cooler with Billet Aluminum Mercury Style Cover (Port)

These oil coolers, covers, and kits are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler over plate, choice of stainless steel oil cooler, billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017


3/4" NPT Cooler Nut
Your Price:
$24.95

3/4" NPT Cooler Nut

625-8075

3/4" NPT Cooler Nut

At last an answer to the restriction problem commonly caused by pipe thread style fittings with a plate style cooler. Sold Each.


8 Plate Stainless Steel Oil Cooler Kit
Your Price:
$359.99

8 Plate Stainless Steel Oil Cooler Kit

755-8021

8 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018


15 Plate Stainless Steel Oil Cooler Kit (Port)
Your Price:
$995.99

Bravo Cooler Housing with 15 Plate Cooler Kit

625-8056

15 Plate Stainless Steel Oil Cooler with Billet Aluminum Mercury Style Cover for Bravo Applicaiton

These oil coolers, covers, and kits are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018


Oil Cooler Fitting -8 Male Inverted Flare to Male -10 AN
Your Price:
$38.99

Oil Cooler Fitting -8 Male Inverted Flare to Male -10 AN

620-797

These CNC machined adapter fittings are designed to thread into popular OEM Mercury styled coolers using -8 inverted flare while providing a -10AN male fitting for connection to high flow -10 oil lines​


13 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler
Your Price:
$299.95

13 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

625-8012

13 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

Our parallel multi-plate stainless steel oil coolers are the very best cooler available on the market today. Plate style coolers are unmatched in heat transfer providing maximum temperature reduction consistently while offering little to no pressure drop associated in other designs. The stainless construction offers superb corrosion resistance.


15 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler
Your Price:
$329.99

15 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

625-8014

15 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

Our parallel multi-plate stainless steel oil coolers are the very best cooler available on the market today. Plate style coolers are unmatched in heat transfer providing maximum temperature reduction consistently while offering little to no pressure drop associated in other designs. The stainless construction offers superb corrosion resistance.


8 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler
Your Price:
$239.99

8 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

625-8011

8 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

Our parallel multi-plate stainless steel oil coolers are the very best cooler available on the market today. Plate style coolers are unmatched in heat transfer providing maximum temperature reduction consistently while offering little to no pressure drop associated in other designs. The stainless construction offers superb corrosion resistance.


13 Plate Billet Aluminum (6061-T6) Oil Cooler Cover, Starboard Side
Your Price:
$239.99

13 Plate Cast Aluminum Oil Cooler Cover, Starboard Side

755-8007

Oil Cooler Cover - 13 Plate Cast Aluminum Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018


15 Plate Billet Oil Cooler Cover Port Side
Your Price:
$329.99

15 Plate Billet Oil Cooler Cover Port Side

755-8036

15 Plate Billet Oil Cooler Cover, Port Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017


8 Plate Billet Oil Cooler Cover, Port Side
Your Price:
$169.99

8 Plate Cast Oil Cooler Cover, Port Side

755-8037

8 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing.  We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum.  Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017


13 Plate Cast Oil Cooler Cover, Port Side
Your Price:
$239.99

13 Plate Cast Oil Cooler Cover, Port Side

755-8005

13 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing.  We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum.  Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017


8 Plate Cast Aluminum (356-T6) Oil Cooler Cover, Starboard Side
Your Price:
$169.99

8 Plate Cast Aluminum (356-T6) Oil Cooler Cover, Starboard Side

755-8006

Oil Cooler Cover - 8 Plate Cast Aluminum (356-T6) Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018


Bravo Style Oil Cooler Flywheel Housing Assembly Only
Your Price:
$679.99

Bravo Style Oil Cooler Flywheel Housing Assembly Only

625-8050

Extreme Duty Bravo Style Oil Cooler Flywheel Housing Assembly - Flywheel Housing Assembly Only (No Cooler Kit)

Yet another industry first from the guys at Keith Eickert Performance Products.  This all new Extreme Duty Bravo Flywheel Housing solves numerous problems that have plagued engine builders and boaters since the introduction of the Bravo style outdrive by incorporating an engine mounted oil cooler within the engines flywheel cover.  Now all of the engines oiling system components can be directly attached to the engine.  No more stringer mounted coolers or extended length hoses required.  But the best part is the fact that this unit uses the superior plate style of oil cooler making it the ultimate choice for high performance applications.  The oil coolers chamber features 1" NPT water inlets and is hard coat anodized for maximum corrosion protection.  Each kit includes the appropriate high flow multi-plate cooler, cooler cover plate, adapter nuts and hardware.  Oil plumbing sold separately.


Bravo Style Oil Cooler Flywheel Housing Assembly with 13 Plate Cooler Kit
Your Price:
$929.99

Bravo Style Oil Cooler Flywheel Housing Assembly with 13 Plate Cooler Kit

625-8052

Extreme Duty Bravo Style Oil Cooler Flywheel Housing Assembly - Flywheel Housing Assembly with 13 Plate Cooler Kit

Yet another industry first from the guys at Keith Eickert Performance Products.  This all new Extreme Duty Bravo Flywheel Housing solves numerous problems that have plagued engine builders and boaters since the introduction of the Bravo style outdrive by incorporating an engine mounted oil cooler within the engines flywheel cover.  Now all of the engines oiling system components can be directly attached to the engine.  No more stringer mounted coolers or extended length hoses required.  But the best part is the fact that this unit uses the superior plate style of oil cooler making it the ultimate choice for high performance applications.  The oil coolers chamber features 1" NPT water inlets and is hard coat anodized for maximum corrosion protection.  Each kit includes the appropriate high flow multi-plate cooler, cooler cover plate, adapter nuts and hardware.  Oil plumbing sold separately.


Bravo Style Oil Cooler Flywheel Housing Assembly with 8 Plate Cooler Kit
Your Price:
$779.99

Bravo Style Oil Cooler Flywheel Housing Assembly with 8 Plate Cooler Kit

625-8051

Extreme Duty Bravo Style Oil Cooler Flywheel Housing Assembly - Flywheel Housing Assembly with 8 Plate Cooler Kit

Yet another industry first from the guys at Keith Eickert Performance Products.  This all new Extreme Duty Bravo Flywheel Housing solves numerous problems that have plagued engine builders and boaters since the introduction of the Bravo style outdrive by incorporating an engine mounted oil cooler within the engines flywheel cover.  Now all of the engines oiling system components can be directly attached to the engine.  No more stringer mounted coolers or extended length hoses required.  But the best part is the fact that this unit uses the superior plate style of oil cooler making it the ultimate choice for high performance applications.  The oil coolers chamber features 1" NPT water inlets and is hard coat anodized for maximum corrosion protection.  Each kit includes the appropriate high flow multi-plate cooler, cooler cover plate, adapter nuts and hardware.  Oil plumbing sold separately.


Dual Cooler Flywheel Housing Kit
Your Price:
$899.99

Dual Cooler Flywheel Housing Kit

755-8053

Dual Cooler Flywheel Housing Kits - Dual Cooler Flywheel Housing (Bellhousing Only, No Cooler Kits)

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthening ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance. Kits include a dual cooler flywheel housing, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware. Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10060


Dual Cooler Flywheel Housing Kit
Your Price:
$1,599.99

Dual Cooler Flywheel Housing Kit

755-8054

Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with 13 Plate Port Cooler and 8 Plate Starboard Cooler

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthing ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.  Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.  Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10060