
513-BT-60W-RGBW This controller will operate both normal RGB (Red, Green, & Blue) and RGBW (RGB + White).
PlashLights waterproof Bluetooth controller is operated via a mobile phone app to turn on/off, adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from.
The operation is very simple with mobile phone control (IOS or Android). Your phone is not needed when a switch is installed as the lights will defer to the last setting when powered on (Example: If you have them on a blue stobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe). Basically, your phone is only required to change the color or patterns.
-
Requires download of PlashLights APP (FREE)
- Simple to mount with a tab on each side
- IP67 Rated Enclosure = Waterproof
- Easily control and synchronize up to 240 Watts of lighting
- 15A when RGB used (5A/per channel)
- 20A when RGB+W used (5A/per RGB channel & 5A white)
- Compatibility: bluetooth 4.0 (bluetooth phones of 4.0 or above)
- Supports mobile phone system: IOS 6.0 android 4.3 or above
- Operating Voltage: 12~24V DC
- Software language: English
- Control distance: 65 feet
- Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
- Working temperature: - 4°F to 145°F
100% MADE & ASSEMBLED IN USA
Control Operations:
- Instructions included on APP
Includes Multi-Zone Sync Feature:
- Control multiple zones with multiple controllers as they will all sync together (each controller is sold separately)
Notes:
- Do not place RGBW controller inside a metal container as it will block the signal.
- Double check your incoming voltage as this controller cannot accept reverse polarity, AC, or DC voltage over 24V.
|
|
513-WH-2-X2CUBE For an easy installation a wiring harness is a Must. This harness will save you time and money during installation. Comes with 12VDC relay, battery terminal connections, in line fuse, red illuminated rocker switch (requires a 3/4" hole to be flush mounted), and 23 ft. of wire (from the relay: 9ft to each light (2 strands), 4ft to switch, 1ft to battery). Ideal for ATVs, UTVs, & Autos. For marine application it is generally best to have a custom one built.
- Illuminated Round Waterproof Switch
- Rated Up to 100 Watts Per Output
- Includes 40A Relay and Fuse
- 25 ft in Length Total (2 strands 9 ft from Relay to Light, 9 ft to Switch, and 16 in to Battery
- Rugged Black Insulated Power Wire
- For Connecting Two (2) X2 Cubes Lights or (2) 6" Single Row Flush Mount Lights
|
|
This Part has options, please click the button below to order.
513-NR-XX + Option(s) Long LED Light bars can resonate in the wind. If you are experiencing a lot of wind noise from your large LED Light bars, it could be from the cooling fin resonance (vibration) from the wind. These isolators snap in between the cooling fins to stop the vibrating resonance noise. We recommend 1 every 10" or so. Made from non-hardening rubber. Made to fit our XX-Series, MX-Series, CX-Series light bars, but also fits Rigid Industries light bars.
These are a perfect fit with no modifications required.
Eliminates Whistle, Harmonics, Noise, Rattles etc. about 90%.
***Sold Individually***
Warning! They fit very tight, so you will have to wrestle them in a bit, but hey, you're no sissy! You can take 'em!
|
|
516-1050 6 Foot Flat Molding Strip For LED Light Strips
|
|
This Part has options, please click the button below to order.
516-10 + Option(s) Don't settle for just one color from your LED lights! These UL approved LED light strips do it all! When paired with WiFi Control Box and your iPhone or Android smartphone, these lights can change into an array of colors! Without the WiFi box, they can also be wired to shine permanently in multiple combinations (see wiring specs). These LED strips range from 3-27 Feet and can be cut to fit perfectly.
It's easy to create energy-efficient, innovative accent lighting and general illumination for your boat, dock, trailer or truck with LED strip lighting. We offer a huge selection of RGB color changing LED light panels and LED strip lights that will give your boat and more the visual appeal to create a huge waves. Virtually all our LED strips are UL-listed, so you know it's safe, and versatile.
|
|
516-1005 Don't settle for just one color from your LED lights! This cockpit / cabin light panel does it all! When paired with WiFi Control Box and your iPhone or Android smartphone, these lights can change into an array of colors! Without the WiFi box, they can also be wired to shine permanently in multiple combinations (see wiring specs).
- Hole Cut-Out for cable: 9mm (3/8″)
- Hole cut-Out for connector: 14mm (5/8″)
- The diameter of the light is: 2 3/4"
- Material: Chemically resistant optical polymer body
- Cockpit/Cabin Light, NOT for underwater use.
|
|
514QL-LP-12 Interior Light w/ LED's
Barnegat's low profile LED lamps are an attractive, energy efficient, no maintenance solution for a variety of interior lighting applications
- LED Interior light with a clear lens and 6” wire leads
- White housing and white LED's
- Low profile surface mount design allows illumination in tight areas
- Illuminate walkways, closets, galley or head area
- Low power consumption; 70ma (milliamps)
- Perfect to use as a night light
- Easy installation
|
|
462-177-E126C Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate ground lead wire.
Size: 3-3/4" L x 2-1/4" W x 1/2" H
|
|
462-354-4016471 Plastic lights have 9 blue LEDs in each light. 12 VDC, low amp draw.
- Plastic
- 9 LED's in each light
- Rated at 12 VDC
Housing: White, LED Color: Blue, A: 3-1/8", B: 1/2", C: 2"
Sold: Each
|
|
462-354-4013541 Aluminum. Utilizes one bright blue LED that draws very low amperage and has very long life. LED Color: Blue, A: 1-1/2", B: 13/16", C: 1"
|
|
462-354-4013501 Aluminum. Utilizes one bright white LED that draws very low amperage and has very long life. LED Color: White, A: 1-1/2", B: 13/16", C: 1"
|
|
462-451-101044 Andros accent/courtesy lights are compact, attractive and remarkably bright. Fully water sealed and IP67 compliant, Andros is perfect for interior or exterior installations, ideal for helm stations, flybridges and hard tops. With a hand polished 316 stainless steel finish. Size: 1" x 1", LED Color: Blue, Volts: 12, Amps: 45mA@12V
|
|
462-451-101045 Andros accent/courtesy lights are compact, attractive and remarkably bright. Fully water sealed and IP67 compliant, Andros is perfect for interior or exterior installations, ideal for helm stations, flybridges and hard tops. With a hand polished 316 stainless steel finish. Size: 1" x 1", LED Color: Red, Volts: 12, Amps: 45mA@12V
|
|
462-451-101043 Andros accent/courtesy lights are compact, attractive and remarkably bright. Fully water sealed and IP67 compliant, Andros is perfect for interior or exterior installations, ideal for helm stations, flybridges and hard tops. With a hand polished 316 stainless steel finish. Size: 1" x 1", LED Color: White, Volts: 12, Amps: 45mA@12V
|
|
462-451-101050 Exuma accent/courtesy lights are compact, attractive and surprisingly bright. Illuminates counters, stairs or companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or helm stations. Brushed SS housing.
Dia.: .98", LED Color: Blue, Volts: 10-16, Amps: 45mA@12V
Sold: Each
|
|
462-177-E434 Description: Clear, 1.1875" x 2.5625"
Sold: Each
|
|
462-390-41381P Stylish and functional LED courtesy lights, available with white or blue LED light and with side or down illumination. Surface mount with polished 316 stainless steel trim suitable for interior or exterior installation. Features 5 LED's with only .4 watt power draw. Type: Side, Size: 2-5/8" W x 13/16" H x 1/2" D", LED Color: Daylight White, Volts: 12
|
|
462-390-41383P Stylish and functional LED courtesy lights, available with white or blue LED light and with side or down illumination. Surface mount with polished 316 stainless steel trim suitable for interior or exterior installation. Features 5 LED's with only .4 watt power draw. Type: Down, Size: 2-5/8" W x 13/16" H x 1/2" D", LED Color: Daylight White, Volts: 12
|
|
462-390-41384P Stylish and functional LED courtesy lights, available with white or blue LED light and with side or down illumination. Surface mount with polished 316 stainless steel trim suitable for interior or exterior installation. Features 5 LED's with only .4 watt power draw. Type: Down, Size: 2-5/8" W x 13/16" H x 1/2" D", LED Color: Blue, Volts: 12
|
|
462-390-41339P Splash proof surface mount courtesy light features 5 bright LED's. Ideal for under gunwale lighting, under cabinet or mood lighting.
- 5 x 0.4 Watt White LEDs, 4,500K
- LED Beam Angle: 120°
- Lumen: White 15
- IP65 Waterproof Rating
- 5 x 0.4 Watt White LEDs, 4,500K
- LED Beam Angle: 120°
- Lumens: White 15 , Blue 2.8
- IP65 Waterproof Rating
Size: 2-7/8" x 1-1/2", Finish: White, LEDs: 5, LED Color: Blue, Volts: 12
|
|