This Part has options, please click the button below to order.
735-61 + Option(s) The Xtreme Flush Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 1/4” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.
These LED's are for 12 Volt systems ONLY.
5mm Flush Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
This Part has options, please click the button below to order.
735-60 + Option(s) The
Xtreme Panel Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of
Electro-polished Stainless Steel for maximum corrosion resistance and
easily mount in the dash panel through a 1/4” diameter hole and will
conveniently wire up to your switch to indicate when the switch is on.
They are available in Red and Blue and are wired for a 12V. system.
These LED's are for 12 Volt systems ONLY.
5mm Panel Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Insert the LED thru the drilled hole and push the O-Ring onto the LED
body. Then push the retaining ring onto the LED forcing it to compress
the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
620-8955 Blue LED Indicator Light, 5/16 mounting hole, 12 Volt A polished metal housing gives these lights an attractive look and durability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18 gauge wire leads. Provides a high intensity brightness and is water tight. Available in Red, Amber, Blue and Green.
|
|
This Part has options, please click the button below to order.
865-32 + Option(s) Colored Gauge Bulb Covers, available in Red, Blue, Green, and Yellow. Goes over Standard gauge bulb used in Autometer, Hardin, etc... gauges. Note Livorsi gauges use LED lights and these will not work with them or any other gauge that uses LED's. Comes in packs of 3.
|
|
516-9850-0001 Dimmer Switch
This dimmer box will dim the LED light brightness for night operation
|
|
620-8960 Green LED Indicator Light, 5/16 mounting hole, 12 Volt A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.
|
|
730-LEDW + Option(s) LED Lights for Livorsi Gauges, Wedge Style. 12.8v. LED lights outshine and outlast incandescent bulbs. NOTE: These do not work with standard DC/DCS 2-1/16" or 2-5/8" gauges. On those gauges the led is soldered to the circuit board. These lights only work on Tachs and Speedos.
|
|
865-3211 Replacement Light Bulb & Socket Assy for Autometer Gauges
4.9 Watt bulb for use with 2-1/16'' and 2-5/8'' gauges with steel cases. Also used in some tachometers and speedometers. Note: Replaces old style socket. Designed for use in Autometer gauges.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
620-8965 Amber LED Indicator Light, 5/16 Mounting Hole, 12 Volt A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.
|
|
