462-23-665443 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 1-1/4", Flange: 2-3/4", Max Hull Thickness: 5/8" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665493 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 1-1/8", Flange: 2-1/4", Max Hull Thickness: 1-3/4" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665433 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 1-1/8", Flange: 2-1/4", Max Hull Thickness: 5/8" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665473 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 3/4", Flange: 1-7/8", Max Hull Thickness: 1-5/8" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665413 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 3/4", Flange: 1-7/8", Max Hull Thickness: 5/8" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665463 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 5/8", Flange: 1-7/8", Max Hull Thickness: 1-1/16" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-665403 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Hose: 5/8", Flange: 1-7/8", Max Hull Thickness: 5/8" Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
|
|
462-23-140667 Trailer guide lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. NOTE: Mounting hardware not included. Height: 28-1/2" , Box: 1 Pr. Trailer Guide Lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low-light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. Mounting hardware not included.
|
|
462-23-111307 Convenient handle for maneuvering trailer tongue. Mounts easily to most trailer couplers. Case: 6 Sold: Each
|
|
462-23-14053 For 3" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed.
|
|
462-23-88876 Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. Connector: 90° elbow - Male, Material: Brass, Thread: 1/4" NPT Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use pipe sealing tape on all threads.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-23-8838HM6 "The Universal Sprayless Connector is a safe way to eliminate the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. It replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings. It also comes with a pre-applied fuel grade thread sealant for added convenience. Compatible with Ethanol blended fuels. 2 Year Warranty.
Male connector for use on marine fuel tanks with 1/4" fittings." Connector: Male fitting Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Attwood Vent-Venturi
"A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" system or 13421 for 4" system. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D"
Colors: Black or White
Cut Out: 2" H x 15-3/8" L"
Sold: Each
|
|
462-23-42027 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty. Description: Float switch only, Size: 2-5/8" x 4-1/4", Volts: 12-24, Amps: 12 Sold: Each
|
|
462-622-15500101 "Advanced solid state electronics monitor your boat's systems and are constantly working to increase performance and economy. The system can be used in new or retrofit installations. The tabs are automatically deployed before taking off to reduce bow rise and time to plane. Once the boat is on plane it is automatically leveled and held there. It's that simple! Setup is simple and it can use some or all of the data from other devices such as GPS speed, engine RPM, fuel consumption, etc. to constantly maintain optimal running angles every time. Two preset manual positions can be stored for such things as rough water or different speeds. A special "hold" feature maintains the boat's planing position until it's powered off. Manual override is also simple; just tap the up or down buttons. All this is controlled from a single 6" x 6" x 2" fully submersible box that contains three gyros and three accelerometers with waterproof connections and components. Plug and play illuminating key pad control with deutsch connection. Interfaces with NMEA 2000 devices to show position information on other devices or to get information from them.
The Auto Glide system requires an NMEA 2000 GPS.
15500101 & 15501101: Are designed for boats without an existing NMEA network. They include a GPS antenna and NMEA 2000 network
Boat Must Be Equipped With Lenco Electric Trim Tabs
- 12 and 24 volt compatible
- Fast, easy installation
- All plug & play connections
- All waterproof, solid state components
- Quick response. Built-in retractor for trim tabs in auto mode
- Reads SmartCraft, NMEA 2000 & J1939 data
See Lenco's website at www.lencoautoglide.com for complete product descriptions, part number selection help, installation instructions, and operating instructions."
Boat Must Be Equipped With Lenco Electric Trim Tabs
- 12 and 24 volt compatible
- Fast, easy installation
- All plug & play connections
- All waterproof, solid state components
- Quick response. Built-in retractor for trim tabs in auto mode
- Reads SmartCraft, NMEA 2000 & J1939 data
See Lenco's website at www.lencoautoglide.com for complete product descriptions, part number selection help, installation instructions, and operating instructions.
Description: w/GPS & NMEA Network, Fits: Single Actuator Tab System
|
|
462-70-H5 Auto Prop Propeller Nut Anodes w/Nylon Inserts
|
|
462-23-42017 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty. Description: Float switch with cover, Size: 2-7/8" x 5-1/4", Volts: 12-24, Amps: 12 Sold: Each
|
|
462-137-6000311
- Depth Highlight (Depth Highlight Range)
- Water Level Offset
- Shallow Water Highlight
- Mark, Import, and Export waypoints
- i-Pilot Link functionality
Sold: Each
|
|
464-7610 Automatic Charging Relay "ACR"
Blue Sea System SI-Series Start Isolation Automatic Charging Relay automatically isolates batteries during starting to protect sensitive electronics and manages the charging of two battery banks. The 120 AMP continuous rating supports the high-output alternators. LED light indicates when batteries are combined and blinks when the undervoltage or starting isolation feature is engaged.
Features:
- Side and bottom knockouts for power cable connections
- Clip-on cover protects terminal connections
- 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation
- Start Isolation (SI) can be configured for temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
- 12/24 volt auto ranging voltage input
- Hermetically sealed contacts/vaporproof
- Remote LED output indicates relay state away from ACR (required optional LED)
- Senses charging on two battery banks
- Intermittent rating: 5min. = 210 AMPS
- Continuous rating = 120 AMPS
- Amperage operating current = 15mA
- Maximum cable size = 1/0 AWG
- Amperage operating current -
- 12 Volts DC = 175mA
- 24 Volts DC = 115mA
|
|
462-114-05101110 Flapper will automatically allow for water to drain from the hull when boat is under way
Water tight seal when the boat is at a stop
Flexible neoprene plug inserts in the transom drain hole - Flapper will automatically allow for water to drain from the hull when boat is under way
- Water tight seal when the boat is at a stop
- Flexible neoprene plug inserts in the transom drain hole
Fits: 1" standard drains to 2-1/4" thick transoms" Sold: Each
|
|
