462-23-664065 "316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck."
Type: Gas, Hose: 1-1/2" I.D."
Sold: Each
|
|
462-23-116354 Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining. Color: Black, Size: 4" H x 4-3/8" W", Case: 6
|
|
462-23-116314 Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining. Color: White, Size: 4" H x 4-3/8" W", Case: 6
|
|
462-23-660273 Stainless steel with removable pin so that hatches can be completely removed without removing hinges. Pre-drilled for 8 screws. Skin packed.
Size: 3" x 2-13/16", Fastener: #10
|
|
462-23-124613 Holds hatch or motor box open, bends to close. Flush mounting dimensions: 7/16" diameter spring x 8-3/4" long predrilled for #8 screws. Stainless steel.
|
|
462-23-47304 "Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty" GPH: 1700, Hose: 1-1/8" I.D.", Volts: 12, Amps: 5.1 Sold: Each
|
|
462-23-47604 "Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty" GPH: 2000, Hose: 1-1/8" I.D.", Volts: 12, Amps: 6 Sold: Each
|
|
462-148-SP424ADJRB - Pro-adjustable head, clear anodized tube
- Supports the cantilevered weight of the motor
- Stabilizes engine and steering mechanism when trailering
- Protects transoms by stabilizing engine and steering mechanism while trailering
- Adjustable toggles with replaceable rubber pads
Mount: Roller/Bolt, Length: 32"-44", Pkg.: Packaged - Pro-adjustable head, clear anodized tube
- Supports the cantilevered weight of the motor
- Stabilizes engine and steering mechanism when trailering
- Protects transoms by stabilizing engine and steering mechanism while trailering
- Adjustable toggles with replaceable rubber pads
|
|
462-23-90841 "Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black. Small: For smaller batteries like Series 16 and those used in Jet skis and lawn equipment. Large: For larger applications. 9-3/4" maximum battery height."
Fits: Group 29/31, OD: 18-3/4" L x 9-1/4" W x 10-1/4" H ", Case: 6
Sold: Each
|
|
462-23-554054A7 Provides 2-mile, 360° visibility for boats up to 39.4 feet. 3 watts at 12VDC and rated for 50,000+ hours of use. LED lights are completely sealed and watertight. 10-year warranty. Compatible with both Attwood and Perko bases. Use with 2-pin locking collar pole.
Length: 54"
Sold: Each
|
|
462-23-140647 Complete kit includes: two multi-functional (stop/tail/turn) submersible low-profile LED trailer lights, license plate bracket, wiring harness, installation hardware, and instructions. Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards. : Sold: Each
|
|
462-23-140657 "Complete kit includes two multi-functional (stop/tail/turn) submersible LED trailer lights, license plate bracket, wiring harness, installation hardware and instructions. For use with trailers under 80" wide. Conforms to U.S. FMVSS & Canadian CFMVSS standards" Case: 2 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lumens: 800 Volts: 12, Amps: 0.43
- Exclusive Heat-Sync Cooling System with Active Overheat Protection
- Resistant to corrosion, chemicals, and UV Damage
- Extreme impact-resistant lens
- 3" sheathed wire
- Reverse polarity protection
- Fully-sealed waterproof electronics
- Simple installation
- Low-profile design
- CE Certified
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lumens: 1350, Volts: 12, Amps: 0.85
- Exclusive Heat-Sync Cooling System with Active Overheat Protection
- Resistant to corrosion, chemicals, and UV Damage
- Extreme impact-resistant lens
- 3" sheathed wire
- Reverse polarity protection
- Fully-sealed waterproof electronics
- Simple installation
- Low-profile design
- CE Certified
|
|
462-23-7533A7 Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels. Fits: "For 1/2" I.D. thru-hull" Sold: Each
|
|
462-23-7534A3 Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels. Fits: "For 5/8" I.D. thru-hull" Sold: Each
|
|
462-148-10309 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: OMC, Bombardier '89 to present, 100 hp and up
Sold: Each
|
|
462-148-10108 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: Mercury engines 135 OptiMax, 150 OptiMax, 175 OptiMax, 75HP-200HP EFI
Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D"
Colors: Black or White
Cut Out: 2" H x 15-1/4" L "
Pkg.: Poly Bag
Case: 6
Sold: Each
|
|
462-23-8812LLP2 "EPA/CARB COMPLIANT
Fuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings." Gals.: 12 w/o Gauge, Size: 24" L x 18" W x 11.6" H", Case: 1
|
|
