464-415110-1 BATTERY TERMINAL COVERS 1/2"DIA
Seadog Battery Terminal Covers are constructed of injection molded PVC and meet USCG requirements and the American Boat and Yacht Council recommendations for prevention of accidental groundings. They will fit most marine batteries and automotive batteries with add-on marine terminals. Set of 2.
Features:
- Size: 1-5/8"W x 2-7/8"L
- Color: Red and black
- Cable gauge: 4, 2, 1
|
|
740-74103 Battery Terminal Disconnect Switch
One turn of the knob disconnects the battery and saves the solid state
regulator and alternator when charging. Switch is rated at 100 amps for 12 or 24
DC use.
|
|
464-5177 Battery Terminal Fuse 50-Amp
Blue Sea Systems Terminal Fuses are Marine Rate and designed for various applications with up to 300 AMP loads. Their high interrupt rating satisfies ABYC requirements for DC main circuit protection. For ease of use, there is a window that indicates blown condition, and each amperage is color coded for easy identification.
|
|
464-415210-1 BATTERY TERMINAL WING NUT STYLE
Seadog 415210-1 Wing Nut Style Battery Terminal
Features:
- Includes Positive/Negative set
- Die cast lead construction
- Sold in pairs
|
|
462-23-90905 Heavy-duty, non-corrosive black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Fits: Series 24/24M, ID: 10-5/8" L x 6-3/4" W x 8-3/4" H ", Case: 6
|
|
462-23-90915 Heavy-duty, non-corrosive black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Fits: Series 27/27M, ID: 12-1/8" L x 6-3/4" W x 8-3/4" H ", Case: 6
|
|
462-114-042233 Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Fits: Group 24
Sold: Each
|
|
462-114-042234 Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Fits: Group 27
Sold: Each
|
|
462-114-042216 Non-corrosive high-strength polyethylene construction resists chemicals and rust
Meets Coast Guard regulations (E10)
Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Fits: Group 29-31, Size: 15-3/8" L x 8" W x 12" H"
Sold: Each
|
|
462-1-HH43143 BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated to a MAXIMUM of 150 HP (total).
Baystar Helms are equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation.
Features:
- Designed for smaller outboards
- 4.5 turns from lock-to lock
- Super low friction helm for smooth comfortable steering
Baystar Helms are equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Features:- Designed for smaller outboards
- 4.5 turns from lock-to lock
- Super low friction helm for smooth comfortable steering
Description: 1.4 Helm Sold: Each
|
|
462-176-70017 Keeps grease off trailer wheels. Fits: Bearings 1781, 1810, Pack: 2 Sold: CD
|
|
462-176-70023 Keeps grease off trailer wheels. Fits: Bearings 2328, 2441, 2717, Pack: 2 Sold: CD
|
|
462-176-70019 Keeps grease off trailer wheels. Fits: Bearings 1980, 1938, 1968, Pack: 2 Sold: CD
|
|
462-176-42104 Prevents wheel bearing failure on boat, snowmobile, ATV, RV and utility trailers. Keeps water and dirt out of hubs and bearings.
- Eliminates bearing repacking
- Grease level easily checked
- Stainless steel components
- Easy to install
Model #: 1980SS, Size: 1.980", Bearing Cup: L44610
|
|
160-08-2205-27 Bearing Cap No.4365
|
|
160-08-2654-07 Bearing Cap No.4910
|
|
160-14-1295-14 Bearing Cap Bolt
|
|
160-10-1264-07 Kit #13 - Bearing cap lip seal (Qty 1)
|
|
160-10-1320-09 Bearing Cap Lip Seal
|
|
160-10-1274-13 Kit #10 - Bearing housing lip seal. Sold Each, 2 required per pump.
|
|
