Hardin Marine

Stainless Steel Sea Pump Drain Plugs - Mercruiser 22-806608A02 / 8M2000874 (5 Pack)

(5) Five per package

If you are tired of having the blue plastic drain plug tabs crumble in your fingers then look no further, these replacements for Mercruiser #22-806608A02 / 8M2000874 from Hardin Marine are polished Stainless Steel and will last a lifetime! Plugs are 1/2-13 thread.

Stainless Steel Sea Strainer Cap - Swirl Style

Note: This Cap only works on Gil Style Sea Strainer 420-913222.

Stainless Steel Throttle Cable Bracket For Edelbrock Carburetors

This beautifully polished stainless steel throttle bracket will allow mounting of all popular cable clamps. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets.

Note: Cable clamps sold separately.

Stainless Steel Throttle Cable Bracket For Holley & Quick Fuel Carburetors

These brackets allow mounting of all popular cable clamps providing a solid cable clamp foundation. These brackets fasten to the top of the carburetor base plate while using existing hardware. All of these brackets are manufactured from stainless steel. The bracket will not fatigue and break like aluminum models. Each bracket is available polished or powder coated in a variety of popular colors. Note cable clamps sold separately. Fits 4150/4160 square bore bolt pattern 5.625" center to center

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Stainless Steel Throttle Cable Bracket For Holley Dominator & Barry Grant King Demon Carburetors

This beautifully brushed stainless steel throttle bracket will allow attachment of all popular cable clamps. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets. 5.375" center to center bolt pattern.

Cable clamps sold separately. 

Stainless Steel Throttle Cable Bracket For Holley Sniper EFI Systems

This stainless steel throttle bracket will allow mounting of all popular cable clamps and accessories to a Holley Sniper EFI System. This bracket mounts above the carburetor flange to provide a solid mounting point for your cable without the flex associated with aluminum brackets. Raw Finish.

Note: Cable clamps sold separately. Sniper throttle arms may require an extension to match different throttle assembly throws because EFI  linkages are different from Carbs. We manufacture this bracket to aid in cable attachment only.

Stainless Steel Transom Mounted Ski Tow

This polished stainless steel ski tow will provide an ultra secure mount for your skiers.

• Fits up to a 2-1/2" thick transom
• Eye Diameter is 3-1/2"
• Stands 1-3/4" off the transom

Stainless Steel Wiring Harness Cannon Plug Mount/Breaker Mount

These mounts provide a strong non-corrosive engine wiring harness plug mount. And, they can be universally mounted.

These are NOT cheap automotive-style band clamps They are a 100% stainless steel band, clamp, and screw. These clamps are designed to give years of trouble-free service. Don't trust anything but the best for your boat.

• 100-720-6306, use with 3/8" fuel hose
• 100-720-6310, use with 5/8" fuel hose
• 100-720-6312, use with 3/4" water hose
• 100-720-6316, use with 1" water hose
• 100-720-6320, use with 1-1/4" and 1-1/2" Water hose
• 100-720-6328, use with 1-5/8" water hose
• 100-720-6336, use with 2" fuel hose
• 100-720-6352, use with 2-7/8" and 3" Exhaust hose
• 100-720-6372, use with 4" Exhaust hose
• 100-720-6396, use with 5" Exhaust hose

Stainless Trim Sender Wiring Thru-Hull Fitting, 45 Deg

Incorporating an o-ring seal, this thru-hull is the easiest and cleanest way to route your wiring without having to goop it up with tons of silicone.  Fits Trim Sender Wires such as those as used on Mayfair Trim Indicators systems.

Standard "ST" Shift Or Throttle Control - Chrome

This "ST" control has been an economical and durable control for years. It can be used as a shift or throttle control, it is universal in design. It features a chrome finish and is traditionally used as a forward/reverse control in jet boat applications using a foot throttle assembly.

• Constructed of 316L Stainless Steel.
• Inlet plates welded to a large diameter crossover tube to provide equal water distribution.
• Uses a standard 1-1/4" slip-on inlet connection.
• Available in port and starboard inlet configurations (check before ordering).
• For Chevy Engines Only.

• Constructed of 316L Stainless Steel.
• Inlet plates welded to a large diameter crossover tube to provide equal water distribution.
• Uses a standard 1-1/4" slip-on inlet connection.
• Starboard configuration (check before ordering).
• For Chevy Engines Only, BBC.
• Includes bolts and gaskets.

Standard Dominator/4500 Super Sucks 2" Spacer

How does 10 to 15 horsepower sound in only 15 minutes. That's right we've tested this and now we're believers and users of this awesome product. The unique design of the center section of this spacer actually speeds up the airflow into the engine. We all know more air in equals more power out. This unit works on either single or dual plane intake manifolds with a square flange carburetor mounting pad. You won't be disappointed.

Standard Duty Damper Plate

Standard Duty - These plates contain damper springs similar to a car clutch disc. These springs take the shock out of the shift. Not recommended for high performance applications.

Standard Duty Electric Fuel Pump

These universal rotary vane electric fuel pump operates using leaded and unleaded gasoline, gasohol, and fuel boosters. They have an internal pressure-regulating valve, and feature free-flow fuel delivery. These pumps have no points to burn out, and no shaft seals to leak or deteriorate. Easy to install, Designed for 12-volt marine systems.

• 4 - 6 psi (max pressure)
• 1/4'' NPT inlet/outlet
• No Regulator Required
• 72 gph free flow rate.

Standard Duty Exhaust Manifold Gasket - 454/502 Chevy Round Port - Sold in Pairs

These are high quality original equipment style gaskets die cut to exacting size and shape for the perfect fit every time.

Sold in Pairs

Standard Duty Exhaust Manifold Gasket - Small Block Chevy Manifold- Sold in Pairs

These are high quality original equipment style gaskets die cut to exacting size and shape for the perfect fit every time.

Sold in Pairs

Standard Duty Toggle Switch
Momentary On/Off Single Pole

These toggle switches are the best we’ve found. They feature a nickel plated finish with brass terminal connections. They are rated at 25 amps and require a 1/2" mounting hole.

Note: Weather tight boots sold separately.

Standard Duty Toggle Switch Momentary On/Off/Momentary On Single Pole

These toggle switches are the best we’ve found. They feature a nickel plated finish with brass terminal connections. They are rated at 25 amps and require a 1/2" mounting hole.

Note: Weather tight boots sold separately.

Standard Duty Toggle Switch On/Off/On Single Pole

These toggle switches are the best we’ve found. They feature a nickel plated finish with brass terminal connections. They are rated at 25 amps and require a 1/2" mounting hold.

Note: Weather tight boots sold separately.

Standard Duty Toggle Switch On/Off

Commonly used with Corsa Electric Captain's Call Systems

Standard Holley/Sea Demon Super Suck Spacer

How does 10 to 15 horsepower sound in only 15 minutes. That's right we'vetested this and now we're believers and users of this awesome product. Theunique design of the center section of this spacer actually speeds up the airflow into the engine. We all know more air in equals more power out. This unitworks on either single or dual plane intake manifolds with a square flangecarburetor mounting pad. You won't be disappointed.

Standard Holley/Sea Demon Super Suck 2" Spacer

How does 10 to 15 horsepower sound in only 15 minutes. That's right we've tested this and now we're believers and users of this awesome product. The unique design of the center section of this spacer actually speeds up the airflow into the engine. We all know more air in equals more power out. This unit works on either single or dual plane intake manifolds with a square flange carburetor mounting pad. You won't be disappointed.

Standard Marine Seal Complete Combination Gasket Kit - Big Block Chevy Gen 4- Sold in Pairs

For those of you that require all of the gaskets required for an engine rebuild we offer these convenient combination kits. You'll receive intake manifold gaskets, exhaust manifold gaskets, valve cover gaskets, cylinder head gaskets, oil pan gaskets, and a front timing cover or water pump cover gasket (seal sold separately). These gaskets give the peace of mind you did the job right. Choose from this standard Marine Seal kit or the Best Xtreme Marine Seal.

Sold in Pairs

Standard Marine Seal Complete Combination Gasket Kit - Big Block Chevy Gen 5 & 6- Sold in Pairs

For those of you that require all of the gaskets required for an engine rebuild we offer these convenient combination kits. You'll receive intake manifold gaskets, exhaust manifold gaskets, valve cover gaskets, cylinder head gaskets, oil pan gaskets, and a front timing cover or water pump cover gasket (seal sold separately). These gaskets give the peace of mind you did the job right. Choose from this standard Marine Seal kit or the Best Xtreme Marine Seal.

Sold in Pairs