This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for Use with Dual Mercury Bravo Drive with Mayfair or Mercury Gen1 Trim Tabs.
- Mayfair and Mercury Gen1 trim tabs have 1/2" outer diameter trim ram mounting shafts.
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for use with Dual Mercury Bravo Drive with Mercury Gen2 Trim Tabs.
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes: (4) Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for use with Dual Mercury Bravo Drive with Mercury Trim Tabs with a 3 wire electric sender
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator System by Mayfair for Use with Dual Mercury Speedmaster / TRS / Alpha Drives.
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- 5" Length x 2-1/2" Width Panel
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for Use with Dual Mercury Speedmaster /
TRS / Alpha Drive with Mayfair or Mercury Gen1 Trim Tabs.
- Mayfair and Mercury Gen1 trim tabs have 1/2" outer diameter trim ram mounting shafts.
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for use with Dual Mercury Speedmaster /
TRS / Alpha Drive with Mercury Gen2 Trim Tabs.
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED
Lighted Indicator System by Mayfair for use with Dual Mercury Speedmaster /
TRS / Alpha Drive with Mercury Trim Tabs with a 3 wire electric sender
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator System by Mayfair for Use with Mayfair Gen 3 Trim Tabs with a 3 wire electric sender
- Lights Run through Red, Green and Blue from Top to Bottom.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring, No Cables Required!
- Length 5" x Width 2-1/2" Panel
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator System by Mayfair for Use with Mayfair and Mercury Gen1 Trim Tabs with 1/2 dia. trim shafts.
- NOTE: Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring, No Cables Required!
- Length 5"
- Panel Width 2-1/2"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Mayfair and Mercury Gen2 Trim Tabs, with 5/8" diameter trim ram mounting shafts
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring, No Cables Required!
- Includes Wiring Harnesses
- Length 5" x Width 2-1/2" Panel
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Imco SCX Drive
with Mayfair or Mercury Gen1 Trim Tabs.
- Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Imco SCX Drive
with Mercury Gen2 Trim Tabs.
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator System for Use with Single #6 Drive.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring, No Cables Required/
- Includes Wiring Harnesses
- 5" Length x 2-1/2" Width Panel
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Mercury Bravo Drive
with Mayfair or Mercury Gen1 Trim Tabs.
- Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Mercury Bravo Drive
with Mercury Gen2 Trim Tabs.
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Mercury Speedmaster / TRS / Alpha Drive
with Mayfair or Mercury Gen1 Trim Tabs.
- Mayfair and Mercury Gen1 trim tabs have 1/2 outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue and Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes: (3) Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- LED Lighted Indicator
System by Mayfair for Use with Single Mercury Speedmaster / TRS / Alpha Drive
with Mercury Gen2 Trim Tabs.
- Mercury Gen2 trim tabs have 5/8" outer diameter trim ram mounting shafts.
- Single Drive Setup Lights Up Both Sides Evenly for Single Drive Display.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished Stainless Steel or Powder-Coated Billet Aluminum Rims.
- Easy to Install and Simple Wiring. No Cables Required.
- Includes: (3) Wiring Harnesses
- Length: 5"
- Width: 5"
- Complete Kit - Includes Panel, Harness, and Electronic Sensor Actuators.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished or Powder-Coated Stainless Steel Rim.
- Easy to Install and Simple Wiring, No Cables Required
- 5" Length x 2-1/2" Width Panel
- PANEL ONLY!
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished or Powder-Coated Stainless Steel Rim.
- Easy to Install and Simple Wiring, No Cables Required
- 5" Length x 2-1/2" Width Panel
- PANEL ONLY!
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished or Powder-Coated Stainless Steel Rim.
- NEW Gen III Indicators use NMEA 2000 cables for easy installation.
- Gen III panels feature 2X the LED's - 76 per board.
- Easy to Install and Simple Wiring, No Cables Required
- 5" Length x 5" Width Panel
- PANEL ONLY!
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- Lights Run through Red, Green and Blue from Top to Bottom.
- Available with Carbon Fiber faces in Black, Silver, Blue, Red
- Polished or Powder-Coated Stainless Steel Rim.
- Easy to Install and Simple Wiring, No Cables Required
- 7" Length x 5" Width Panel
- PANEL ONLY!
|
|
420-913272 Lid Only for Hardin 1/2" Hole Clamp Type Offshore Sea Strainer
This is a 1/2" hole replacement Sea Strainer Lid. This clear-view lid allows unrestricted visual inspection. Designed to fit Hardin Offshore Generation 2 Sea Strainers only.
|
|
620-913245 High Performance Sea Strainer Lid, Lid Only
This is a replacement Sea Strainer Lid. This clear-view lid allows unrestricted visual inspection. 6.5" diameter. Fits Hardin Swirl Away Sea Strainers.
|
|
620-913196 Titan Sea Strainer Lid, Lid Only
This is a replacement Sea Strainer Lid for Titan Sea Strainer. This clear-view lid allows unrestricted visual inspection. Fits Hardin Titan Sea Strainers.
|
|
625-1204 Lid O-Ring for Gil / Hardin Offshore 3/8 Hole Clamp Type, Sea Strainer
Designed to fit Gil Generation 2 (Single Knob) and Hardin Offshore Generation 1 Sea Strainers.
|
|
900-37FWSTSS Lid Washer for Gil / Hardin Offshore 3/8 Hole Clamp Type, Sea Strainer
Designed to fit Gil Generation 2 (Single Knob) and Hardin Offshore Generation 1 Sea Strainers.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lifeline High Performance Competition Jacket (Poker Run Type)
This comfortable flotation jacket is Ideal for Inboard, Drag, OPC, Offshore, SLT, Vintage, PWC and Ski Racing. Made from 1000 Denier Cordura Nylon, the High Performance Jacket features a heavy-duty locking slide front zipper, one inch closed cell foam in the front chest area and collar, Heavy-duty impact foam with built-in ‘Flak Type’ impact material to give extra protection to chest, sides and back, and as with all Lifeline Racing Jackets, left and right D-rings for easy kill switch shut-off. One inch nylon webbing is used for the center-belt, leg straps and the adjustable side straps. Many styles include a user friendly zippered pocket. High Performance Jackets can be designed to color coordinate with you boat. All colors are flat. For custom designs, patterns or colors such as the gray/checkered pattern, or the tri-color pictured, please call for a price quote. All jackets are custom built and take 4-5 weeks to build.
AVAILABLE IN SMALL (30"-36"), MEDIUM (36"-42"), LARGE (42"-48")
Note: Chest sizes larger than 49" require custom measurements
|
|