Bilge Hardware - Bilge Pumps

500 Gallon Per Hour Bilge Pump
Your Price:
$46.99

500 Gallon Per Hour Bilge Pump

135-22502

500 Gallon Per Hour Bilge Pump

These Bilge Pumps are made in America, and are of top quality These pumps meet all necessary USCG requirements and are tested and specified by over 200 boat manufacturers.


750 Gallon Per Hour Bilge Pump
Your Price:
$48.99

750 Gallon Per Hour Bilge Pump

135-22702

750 Gallon Per Hour Pump

These Bilge Pumps are made in America, and are of top quality These pumps meet all necessary USCG requirements and are tested and specified by over 200 boat manufacturers.


1000 Gallon Per Hour Bilge Pump
Your Price:
$54.99

1000 Gallon Per Hour Bilge Pump

135-22102

These Bilge Pumps are made in America, and are of top quality These pumps meet all necessary USCG requirements and are tested and specified by over 200 boat manufacturers.

500 GPH Cartridge Bilge Pump
Your Price:
$29.99

500 GPH Cartridge Bilge Pump

135-32503

500 GPH Cartridge Bilge Pump

Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.

    Features & Benefits
  • All-in one motor/impeller unit
  • No tools needed for maintenance
  • Extremely energy efficient
  • Water cooled motor for long service life
  • Five models for fifferent capacity needs
  • Can be equipped with a float switch for automatic operation
  • Meets the strict international standard, ISO 8849 Marine
  • Made in the USA

Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.


750 GPH Cartridge Bilge Pump
Your Price:
$44.99

750 GPH Cartridge Bilge Pump

135-32703

750 GPH Cartridge Bilge Pump

Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.

    Features & Benefits
  • All-in one motor/impeller unit
  • No tools needed for maintenance
  • Extremely energy efficient
  • Water cooled motor for long service life
  • Five models for fifferent capacity needs
  • Can be equipped with a float switch for automatic operation
  • Meets the strict international standard, ISO 8849 Marine
  • Made in the USA

Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.


1000 GPH Cartridge Bilge Pump
Your Price:
$54.99

1000 GPH Cartridge Bilge Pump

135-32903

1000 GPH Cartridge Bilge Pump

Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses – assuming you own one of SPX Johnson Pump’s cartridge bilge pumps. Cartridge bilge pumps from SPX Johnson Pump can be removed for cleaning or replacement without the use of a single tool. Lift a tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts. The cartridge line is a further development of SPX Johnson Pump’s acclaimed bilge pumps, which have received highest ratings in many different independent tests over the years.

    Features & Benefits
  • All-in one motor/impeller unit
  • No tools needed for maintenance
  • Extremely energy efficient
  • Water cooled motor for long service life
  • Five models for fifferent capacity needs
  • Can be equipped with a float switch for automatic operation
  • Meets the strict international standard, ISO 8849 Marine
  • Made in the USA

Water Cooled For Extended Service
The cartridge pumps are manufactured in the United States and the new line encompasses five compact pumps, each for a different capacity need. All of them use remarkably little electricity for the amount of water they pump. Their improved, more efficient motors also provide increased service life, thanks in part to an ingenious solution which circulates the discharge water around the motor for cooling.


Bilge Pump 12V 360 GPH
Your Price:
$24.99

Bilge Pump 12V 360 GPH

464-24DA

Bilge Pump 12V 360 GPH

  • GPH: 360
  • Port Size: 3/4"
  • Draw: 2.1A
  • Fuse: 2.5A
  • Size: 3-1/2"H x 2-3/8"W

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.


Bilge Pump 12v 500 GPH
Your Price:
$31.99

Bilge Pump 12v 500 GPH

464-25D

Bilge Pump 12v 500 GPH 

  • GPH: 360
  • Port Size: 3/4"
  • Draw: 1.9A
  • Fuse: 2.5A
  • Size: 3-1/2"H x 2-3/8"W

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.


Bilge Pump Auto 12v 500 GPH
Your Price:
$86.99

Bilge Pump Auto 12v 500 GPH

464-25S

Bilge Pump Auto 12v 500 GPH

  • Size: 4"H x 2-3/8"W
  • GPH: 500
  • Port Size: 3/4"
  • Draw: 1.9A

The Rule 24V Automatic Bilge Pump features computerized operation and does not require a float switch. It has a stainless steel shaft, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. It can run dry without damage and are non-sparking.


Bilge Pump w/Switch 500 GPH 12v
Your Price:
$74.99

Bilge Pump w/Switch 500 GPH 12v

464-2535A

Bilge Pump w/Switch 500 GPH 12v 

Rule 12V Non-Automatic Bilge Pumps with Float Switches are ideal for small boats. They include a Rule-A-Matic float switch and feature a snap-off strainer for cleaning.

  • Size: 3-1/2"H x 2-3/8"H
  • 35A

Square Submersible Pump 800 GPH
Your Price:
$49.99

Square Submersible Pump 800 GPH

464-20F

Square Submersible Pump 800 GPH

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

  • GPH: 800
  • Port Size: 3/4"
  • Draw: 2.8A
  • Size: 4"H x 2-7/8"W
  • Square pump

LP Pro 900 GPH Automatic 12v
Your Price:
$84.99

LP Pro 900 GPH Automatic 12v

464-LP900S

LP Pro 900 GPH Automatic 12v

    Features:
  • Size: 9.3"L x 2.3"W x 2.3"H
  • Port configurations: Straight: 3/4", 1", 1-1/8" | 90°: 3/4"
  • Includes straight and 90° nozzles

The Rule Low Profile 900GPH Auto Bilge Pump features a compact design and can swivel up to 180° for use in tight spaces or odd configurations. It has a threaded discharge nozzle that will couple with either a straight or 90° fitting and is equipped with a tri-cuspid check valve. It also features an auto check that turns on every 2.5 minutes to check for water and will pump when water levels are at 1.3" (low setting) or 2" (high setting).


Submersible Bilge Pump 1000 GPH
Your Price:
$54.99

Submersible Bilge Pump 1000 GPH

464-20A

Submersible Bilge Pump 1000 GPH

The Rule 1000 Electric Submersible Bilge Pump has proven itself reliable and useful for both boat builders and boat owners. It has 36 different mounting variations and a gas resistant strainer base for lasting quality and durability.

    Features:
  • Size: 2-7/8"W x 4"H
  • Voltage: 12V DC
  • Discharge outlet: 1-1/8"
  • Amp draw: 2.9

Bilge Pump 12v 1100 GPH
Your Price:
$55.99

Bilge Pump 12v 1100 GPH

464-27D

Bilge Pump 12v 1100 GPH

  • Size: 4-1/4"H x 2-3/8"W
  • GPH: 1100
  • Port Size: 1-1/8"
  • Draw: 3.3A

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.


Bilge Pump Auto 12v 1100 GPH
Your Price:
$131.99

Bilge Pump Auto 12v 1100 GPH

464-27S

Bilge Pump Auto 12v 1100 GPH

Rule 12V Automatic Bilge Pumps feature computerized operation and do not require a float switch. They have stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The pump will turn on every 2-1/2 minutes to sense for water, and when water is present the pump will run until the water is removed. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

  • GPH: 1100
  • Hose Dia.: 1-1/8"
  • Draw: 3.3A
  • Size: 4-1/2"H x 2-3/8"W

Bilge Pump 12v 1500 GPH
Your Price:
$109.99

Bilge Pump 12v 1500 GPH

464-2

Bilge Pump 12v 1500 GPH

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

  • Size: 6"H x 4-1/4"W
  • Draw: 4.8A
  • GPH: 1500
  • Port Size: 1-1/8"

Bilge Pump 12v 2000 GPH
Your Price:
$149.99

Bilge Pump 12v 2000 GPH

464-10

Bilge Pump 12v 2000 GPH

Rule 12V Non-Automatic Bilge Pumps require a float or panel switch for operation and feature stainless steel shafts, water cooling and a vibration-free centrifugal impeller. The strainer bases can be snapped off for cleaning. They can run dry without damage and are non-sparking.

  • Size: 6"H x 4-1/4"W
  • Draw: 8.4A
  • GPH: 2000
  • Port Size: 1-1/8"

RuleMate Auto Bilge Pump 500 GPH
Your Price:
$78.99

RuleMate Auto Bilge Pump 500 GPH

464-RM500A

RuleMate Auto Bilge Pump 500 GPH

  • GPH: 500
  • Port Size: 3/4"
  • Draw: 2.0A

Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings.


RuleMate Auto Bilge Pump 1100 GPH
Your Price:
$137.99

RuleMate Auto Bilge Pump 1100 GPH

464-RM1100B

RuleMate Auto Bilge Pump 1100 GPH

Rule-Mate 12V Automatic Bilge Pumps feature a solid state water sensing technology that senses the dielectric constant of water. The pump will activate when the water level rises to 2-3/4" and will not turn on in the event oil enters the bilge. They do not require a separate float switch. They do feature snap-off strainers and one straight and one 90° hose fittings

  • GPH: 1100
  • Port Size: 1-1/8"
  • Draw: 3.4A

Tournament L/W Pump 500 GPH "FC"
Your Price:
$62.99

Tournament L/W Pump 500 GPH "FC"

464-401FC

Tournament L/W Pump 500 GPH "FC"

The Rule Tournament Series Livewell/Aerator Pumps are equipped with several convenient features, like a quick one hand push-button motor cartridge removal system, a rotatable base that positions the discharge nozzle at any location, and threaded nylon hose barb attachments for various hose mounting options. Included with the pumps is a built-in dual port option, water-cooled housing, and a positive snap motor cartridge locking mechanism. The pumps are fitted for transom or seacock mounting options.