Trim Tab Kits - Trim Tabs with Electronic Indicator Senders

12" High Performance Model MH120S Trim Tab Kit w/Electronic Sensors

Starting From:
$3,449.99

This Part has options, please click the button below to order.

12" High Performance Model MH120S Trim Tab Kit w/Electronic Sensors

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • 1-1/2" Piston bore.
  • End of the tab dimension is 9" wide
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Includes trim pumps with bulkhead brackets.
  • Include Trim Hoses.
  • Includes Trim Switch Panel.
  • For 20-25 ft. Boat Lengths
  • NOTE: Shown in White, however Tabs are Standard Black. White available by special order.
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

12" High Performance Model MH120S Trim Tabs w/ Electronic Sensor

Starting From:
$2,699.99

This Part has options, please click the button below to order.

12" High Performance Model MH120S Trim Tabs w/ Electronic Sensor

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • 1-1/2" Piston bore.
  • End of the tab dimension is 9" wide
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • For 20-25 ft. Boat Lengths
  • NOTE: Shown in White, however Tabs are Standard Black. White available by special order.
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

15.5" High Performance Model MH150S Trim Tab Kit w/Electronic Sensors

Starting From:
$3,999.99

This Part has options, please click the button below to order.

15.5" High Performance Model MH150S Trim Tab Kit w/Electronic Sensors

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • 1-1/2" Piston bore.
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • Includes trim pumps and bulkhead brackets.
  • Include Trim Hoses.
  • Includes Trim Switch Panel.
  • For 20-30 Ft. Boat Lengths
  • Black Standard Color
  • White is available as a custom color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

15.5" High Performance Model MH150S Trim Tabs w/Electronic Sensors

Starting From:
$3,499.99

This Part has options, please click the button below to order.

15.5" High Performance Model MH150S Trim Tabs w/Electronic Sensors

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • 1-1/2" Piston bore.
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • For 20-30 Ft. Boat Lengths
  • Black Standard Color
  • White is available as a custom color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

22" High Performance Model MH280ESX Trim Tab Kit with Electronic Sensor

Starting From:
$3,999.99

This Part has options, please click the button below to order.

22" High Performance Model MH280ESX Trim Tab Kit with Electronic Sensor

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • 1-1/2" Piston bore.
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Over 250 square inches of lift surface.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • Includes trim pumps (137-8021) with bulkhead brackets.
  • Includes Trim Hoses
  • Includes Trim Switch Panel.
  • For Boats 25-40 Ft.
  • Black Standard Color
  • White is available as a custom color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

22" High Performance Model MH280ESX Trim Tabs w/Electronic Sensors

Starting From:
$3,499.99

This Part has options, please click the button below to order.

22" High Performance Model MH280ESX Trim Tabs w/Electronic Sensors

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • 1-1/2" Piston bore.
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Over 250 square inches of lift surface.
  • For Boats 25-40 Ft.
  • Black Standard Color
  • White is available as a custom color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

28" High Performance Model MH380ESX After-Plane Trim Tab Kit with Electronic Sensor

Starting From:
$4,299.99

This Part has options, please click the button below to order.

28" High Performance Model MH380ESX After-Plane Trim Tab Kit with Electronic Sensor

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • 1-1/2" Piston bore.
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Over 300 square inches of lift surface.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • Includes trim pumps (137-8023) with bulkhead brackets.
  • Includes Trim Hoses
  • Includes Trim Switch Panel.
  • For 25-40 Ft. Boat Lengths
  • 85 lb. box, 36x16x12.
  • Black Standard Color
  • White is available as a customer color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

28" High Performance Model MH380ESX After-Plane Trim Tabs w/Electronic Sensors

Starting From:
$3,599.99

This Part has options, please click the button below to order.

28" High Performance Model MH380ESX After-Plane Trim Tabs w/Electronic Sensors

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

  • Made from high strength 535 Aluminum Magnesium alloy.
  • All 316 Stainless Steel hardware.
  • 1-1/2" Piston bore.
  • Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
  • Two way hydraulics for improved performance.
  • Zinc Anodes to prevent corrosion.
  • Over 300 square inches of lift surface.
  • For 25-40 Ft. Boat Lengths
  • 85 lb. box, 36x16x12.
  • Black Standard Color
  • White is available as a custom color (may take up to 6 weeks)
  • NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
  • NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

Livorsi 15" Wide x 24" Long 1100 Series Trim Tabs
Starting From:
$2,056.99

This Part has options, please click the button below to order.

Livorsi 15" Wide x 24" Long 1100 Series Trim Tabs

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

Livorsi 15" wide x 24" long 1100 Series Trim Tabs

  • These tabs are suitable for Catamaran Tunnel Tabs, Heavy Cruisers, Performance Boats, Workboats & Military Boats
  • Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
  • Electronic 5V sender can read position on Livorsi LED Indicator or NMEA2000 devices with gateway
  • Available with optional 4” , 6” or 10” LED lights in white, blue, red, green or RGB
  • Tabs are CNC machined from billet aluminum, no casting
  • Tabs are Mil-Spec hard coat anodized to prevent corrosion
  • Five anodes for complete saltwater protection
  • All hinge pins and hardware are stainless steel
  • Adjust transom angles without the use of special tools
  • Standard equipment in Contender, Yellowfin, Intrepid, Fountain, Donzi, Blackwater, Deep Impact, Renegade, SeaVee, Military and many others

These kits Include:

  • Billet tab(s)
  • Pump(s)
  • Mounting hardware
  • Harnesses
  • Thru hull fittings
  • Stainless steel braided hoses and trim switches are purchased separately.
    Four hoses are needed for one kit, two per cylinder.

Livorsi 13.5" wide x 15.5" long 850 Series Trim Tabs
Starting From:
$2,442.99

This Part has options, please click the button below to order.

Livorsi 16.5" Wide x 30" Long 1650 Series Trim Tabs

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

Livorsi 16.5" wide x 30" long 1850 Series Trim Tabs

  • Help boats plane out quickly
  • Significantly limits bow rise
  • The built-in electronic position sensor is compatible with N2K displays & Livorsi LED Indicator
  • Made with billet aluminum, anodized & painted construction
  • 100% made in the USA
  • 1650’s and 1850’s are stepped bottom tabs that provide less drag in the water
  • Available in 11 powder coat colors & with private labeling
  • Optional 4” or 6” LED lights in white, blue, red, or green.
  • For use on boats 20 – 50 feet
  • Tabs are CNC machined from billet aluminum, no casting
  • Tabs are Mil-Spec hard coat anodized to prevent corrosion
  • Five anodes for complete saltwater protection
  • All hinge pins and hardware are stainless steel
  • Adjust transom angles without the use of special tools
  • Hydraulic cylinders designed for 1200 PSI working pressure with dual seals, cylinders may be serviced
  • Plug and play LED electronic position indicators

These kits Include:

  • Billet tab(s)
  • Pump(s)
  • Mounting hardware
  • Harnesses
  • Thru hull fittings
  • Stainless steel braided hoses and trim switches are purchased separately.
    Four hoses are needed for one kit, two per cylinder.

Livorsi 13.5" wide x 15.5" long 850 Series Trim Tabs
Starting From:
$3,055.99

This Part has options, please click the button below to order.

Livorsi 18.5" Wide x 30" Long 1850 Series Trim Tabs

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

Livorsi 18.5" wide x 30" long 1850 Series Trim Tabs

  • Help boats plane out quickly
  • Significantly limits bow rise
  • The built-in electronic position sensor is compatible with N2K displays & Livorsi LED Indicator
  • Made with billet aluminum, anodized & painted construction
  • 100% made in the USA
  • 1650’s and 1850’s are stepped bottom tabs that provide less drag in the water
  • Available in 11 powder coat colors & with private labeling
  • Optional 4” or 6” LED lights in white, blue, red, or green.
  • For use on boats 20 – 50 feet
  • Tabs are CNC machined from billet aluminum, no casting
  • Tabs are Mil-Spec hard coat anodized to prevent corrosion
  • Five anodes for complete saltwater protection
  • All hinge pins and hardware are stainless steel
  • Adjust transom angles without the use of special tools
  • Hydraulic cylinders designed for 1200 PSI working pressure with dual seals, cylinders may be serviced
  • Plug and play LED electronic position indicators

These kits Include:

  • Billet tab(s)
  • Pump(s)
  • Mounting hardware
  • Harnesses
  • Thru hull fittings
  • Stainless steel braided hoses and trim switches are purchased separately.
    Four hoses are needed for one kit, two per cylinder.

DriveSync, Dual Drives
Starting From:
$895.99

This Part has options, please click the button below to order.

TrimSync - Trim Monitoring and Alignment System

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

Operating a multi-engine offshore powerboat can be a little overwhelming at times.  That’s probably why offshore racing is the only motorsport that requires two drivers. Most offshore boats have an engine trim button built into the throttle lever handle.  We all know that the drives rarely stay perfectly even using just the BOTH button on the throttles.  Having them offset can impact handling, and can be dangerous at high speeds.  So that after a couple of moves we are all reaching to the dash to try and even them out.  Over and over again.

TrimSync is a patent pending device that monitors the trim for twin and triple engine boats, so when the operator presses the BOTH/ALL button, it will automatically adjust the drives to be in perfect alignment, every time.  You will never have to worry about how accurate your mechanical trim indicators are because TrimSync will always move the slowest drive to match the others.  There are no extra buttons or complicated operating instructions, just push the BOTH button and TrimSync does the rest.

If, for some reason, you want one drive to be at a different trim then push that drive’s trim button and it will move just as it always has. TrimSync will re-align the drive trim the next time you push the BOTH button. Just drive!

NOTE: Please specify when ordering if using Mercury Racing Engines.


DriveSync, Dual Drives, Race Edition, 3 Wires
Starting From:
$1,195.00

This Part has options, please click the button below to order.

TrimSync Race Edition - Trim Monitoring and Alignment System

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

TrimSync Race Edition+ includes all of the standard TrimSync features AND allows the user to program up to four preset positions that can be recalled with the push of a button. Typically, one preset would be the highest you would ever want to safely trim at speed. Another might be 2°-3° below neutral for when you encounter a wave. Race Edition+ allows you to quickly and safely trim to your “sweet spot” without having to watch the trim indicators or worry about over-trimming at high speeds.

TrimSync Race Edition is also available for trim tab / tunnel tab combinations, which greatly reduces the complexity of coordinating the position of each separately. With up to four presets the user can move the drives and tabs in unison to their individual pre-programmed positions, with a single push of a button. Of course, all presets can be easily overridden by simply pressing any other trim button, just as you would normally do.

NOTE: Please specify when ordering if using Mercury Racing Engines.


NMEA 2000 Software Upgrade For TrimSync
Your Price:
$499.99

NMEA 2000 Software Upgrade For TrimSync

221-1041

NMEA 2000 Software Upgrade For TrimSync

We will upgrade your TrimSync system to NMEA 2000 compatible specifications. Enjoy advanced NMEA 2000 devices and interconnectivity. 

Not Required on Smartcraft equpped boats. 


Note: Must Be Purchased With A TrimSync Product Or Kit

TrimSync - Diagnostics Kit Add On
Your Price:
$150.00

TrimSync - Diagnostics Kit Add On

221-200

TrimSync - Diagnostics Kit Add On

MDC Diagnostic Kit for DriveSync and TrimSync systems consists of a USB cable and software to access onboard diagnostics, calibration process and fault codes. Step-by-step instructions and a built-in help command reduce the time and effort in diagnosing trim-related issues. Using a Windows 7 or later laptop you can run diagnostic tests to determine if there is an issue with the senders, wiring, or trim pump, before they become a problem on the water.

While running the boat, DriveSync and TrimSync log multiple types of errors and retain them even if the power is turned off. The Diagnostic kit allows you to access the error logs to assist in troubleshooting trim issues. For example, air in the hydraulic lines, a trim cylinder that is failing, or trim sender issue will be logged as an error letting you know which engine had the issue, and how many times it has occurred.

The Diagnostic Kit also provides a remote support capability (requires Wi-Fi) to assist with setup or troubleshooting.

Note: Must Be Purchased With A TrimSync Product Or Kit


K PLANE 150S DIG Mercruiser 841944A02
Your Price:
$6,202.00

This Part has options, please click the button below to order.

K PLANE 150S Trim Tab Mercruiser 841944A02

525-841944A02

K PLANE 150S Trim Tab Mercruiser 841944A02

Supercedes: 845702A1, 845711A2, 841944A01, 841944A01

Does not include trim switches or trim hoses, see related parts.


K PLANE 280S DIG Mercruiser 842768A05
Your Price:
$5,659.00

This Part has options, please click the button below to order.

K PLANE 280S Trim Tab Mercruiser 842768A05

525-842768A05

K PLANE 280S Trim Tab Mercruiser 842768A05

Supercedes: 63564A2, 843681A1, 843754A2, 842768A01, 842768A05

Does not include trim switches or trim hoses, see related parts.


K PLANE 380 W/OPP Mercruiser 841945A03
Your Price:
$4,844.00

This Part has options, please click the button below to order.

K PLANE 380 Trim Tab W/OPP Mercruiser 841945A03

525-841945A03

K PLANE 380 Trim Tab W/OPP Mercruiser 841945A03

Does not include trim switches or trim hoses, see related parts.


K PLANE 380S DIG Mercruiser 841945A02
Your Price:
$6,273.00

This Part has options, please click the button below to order.

K PLANE 380S Trim Tab Mercruiser 841945A02

525-841945A02

K PLANE 380S Trim Tab Mercruiser 841945A02

Supercedes: 845802A1, 845712A2, 841945A01, 841945A01

Does not include trim switches or trim hoses, see related parts.