137-8024 + Option(s) This kit allows you to upgrade your shorter 22" trim tabs to be longer 28" trim tabs.
Uses the same upper hardware and just bolts in place of your old lowers. For Gen I tabs using 1/2" pins
|
|
137-8025 This kit allows you to upgrade your shorter 22" trim tabs to be longer 28" trim tabs.
Uses the same upper hardware and just bolts in place of your old lowers. For Gen 2 tabs using 5/8" pins. Available in Black only.
|
|
137-8118 These are rebuild kits for #137-8000 trim rams.
- 137-8008, GLAND, FRONT - 5/8 SHAFT, 1
- 137-8009 ,PISTON, TRIM RAM, 1
- 137-8128, SEAL, WIPER - TRIM RAM, 1
- 625-1114, O-RING, 3
- 625-1135, O-RING, 1
- 625-1325, O-RING, 1
|
|
137-8119 These are rebuild kits for #137-8005 trim rams.
- 137-8013, GLAND, HD TRIM RAM, 1
- 137-8014, PISTON, HD TRIM RAM, 1
- 137-8129, SEAL, WIPER - HD TRIM RAM, 1
- 625-1116, O-RING, 3
- 625-1135, O-RING, 1
- 625-1325, O-RING, 1
|
|
137-8149 This kit includes one trim tab pin, two nuts, two washers, two bushings and two upper trim ram spacers.
|
|
137-8147 Kit Includes:
- 2 Nuts and washers
- 1 Trim Ram Pin with Actuator provision
- 1 Trim Table Cable End with nut and washer
- 4 Bushings
- 2 Spacers
|
|
137-8146 + Option(s) 15.5" Lower Trim Tab Plate for Gen 2 Mayfair Trim Tabs (2) required per kit.
|
|
137-8120 + Option(s) 22" Lower Trim Tab Plate for Gen 2 Mayfair Trim Tabs (2) required per kit. Casting #PEI3011.
|
|
137-8040 + Option(s) Lower Trim Tab Plate for Mayfair Trim Tabs (2) required per kit. Casting #PEI3011.
|
|
137-8042 Lower Trim Tab Starboard for Mayfair Trim Tabs (1) required per kit.
Overall length is 28". 13-1/2" wide.
Also replaces Mercury OEM #843789A1.
|
|
137-8041 Lower Trim Tab Port Plate for Mayfair Trim Tabs (1) required per kit.
Overall length is 28". 13-1/2" wide.
Also replaces Mercury OEM #843790A1
|
|
137-8123 + Option(s) Transom Plate for Mayfair Gen 3 Trim Tabs (2) required per kit. These are Gen 3 style transom plates with provision for sender and LED light. Casting #PEI3001.
Also replaces Mercury OEM #846193A1 and #846191A1.
|
|
137-8043 + Option(s) Transom Plate for Mayfair Trim Tabs (2) required per kit. These replace Gen 1 and Gen 2 Transom Plates. They do not have the LED light provision or Sender provision that is present on new style Gen 3 plates. Casting #PEI3001.
Also replaces Mercury OEM #846193A1 and #846191A1.
|
|
137-8000 SS Trim Ram for Mayfair Trim Tabs (2) required per kit. Comes with bushings.
Sold Each
Also replaces Mercury OEM #845739A10
|
|
137-8005 SS Trim Ram Gen 2 for Mayfair Trim Tabs (2) required per kit.
Sold Each
Also replaces Mercury OEM #845739A10
|
|
137-8053 Kit Includes:
- 4 Nut (#4)
- 2 Nut (#13)
- 2 Cable Thru Hull (#4)
- 2 Trim Ram with Actuator Pin (#18)
- 2 Trim Table Cable End (#15)
- 2 Trim Ram to Pins Bushing (#16)
- 2 Washer (#14)
|
|
137-8051 This kit includes one #12 trim tab pin, two #5 nuts, and two #7 upper trim ran spacers.
|
|
137-8052 This kit includes:
- 1 Trim Ram Pin (6)
- 1 Trim Ram Depends Bushing (17)
- 2 Lower Trim Ram Bushing (16)
- 2 Nut (5)
|
|
137-8134 Heavy Duty Trim Tab Hinge Pin for Gen 2 Mayfair Trim Tabs (2) required per kit. Also replaces Mercury OEM #847195
|
|
137-8135 Trim Tab Hinge Pin with Actuator provision, for Gen 2 Mayfair Trim Tabs (2) required per kit.
|
|
