462-354-2950901 Stainless steel rail fitting. Angle: 90°, Tube: 7/8" OD, Description: Elbow
|
|
462-354-2916001 Stainless steel rail fitting. Angle: 60°, Tube: 7/8" OD, Description: Tee, Left
|
|
462-354-2926001 Stainless steel rail fitting. Angle: 60°, Tube: 7/8" OD, Description: Tee, Right
|
|
462-354-2909041 SS Rail end fitting. Angle: 90°, Tube: 1" OD, Description: Tee, Hinged
|
|
462-354-2909031 SS Rail end fitting. Angle: 90°, Tube: 7/8" OD, Description: Tee, Hinged
|
|
462-332-PM1 "Fits all Danforth and Deepset anchors on pulpit or rail. Unique adjustable clips grip anchor securely. Quick release for emergencies. Anchors up to 35 lbs. are held away from rail, with flukes downward to prevent snagged lines. All stainless. Bracket fits both 7/8" and 1" rails."
Sold: Each
|
|
462-354-3271481 Molded nylon. A: 3-3/16", B: 3-5/8", Fits: 7/8" - 1" Tubing" Sold: Each
|
|
462-354-3274001 "Injection molded nylon sockets fit snugly on a 7/8" rail without fasteners and are easily removed when not in use."
Size: 3/8" x 1-11/16", Pack: 1 pr.
Sold: Pack
|
|
462-32-1093 Injection molded polyethylene clips mount securely to your 7/8" railings. Used for hanging fenders, holding power cords, etc. Pack: 1 pr.
|
|
462-354-3271411 "Stainless steel construction with nylon mounting brackets that will fit both 7/8" and 1" tubing. Mounts on either vertical or horizontal rails or on any flat surface. Allows antenna wire to feed directly through the base. Ideal for VHF, Stereo, GPS and CB antennas with standard 1"-14 threads." Fits: 7/8"-1" Tubing" Sold: Pack
|
|
462-354-3273571 "Fender holders fold down when not in use. Mounts to 7/8-1" rails. Formed 304 stainless steel." Size: 7.5"
|
|
462-354-3273591 "Fender holders fold down when not in use. Mounts to 7/8-1" rails. Formed 304 stainless steel." Size: 9.5"
|
|
462-354-3273611 "Fender holders fold down when not in use. Mounts to 7/8-1" rails. Formed 304 stainless steel." Size: 11.5"
|
|
462-354-2865651 Die-cast Zinc Chrome plated.
Type: Left Hand, Tube: 7/8" OD", Rail Height: 2-1/8", Fastener: #10 FH
Sold: Each
|
|
462-354-2865601 Die-cast Zinc Chrome plated.
Type: Center, Tube: 7/8" OD", Rail Height: 2-1/8", Fastener: #10 FH
Sold: Each
|
|
462-354-2865661 Die-cast Zinc Chrome plated.
Type: Right Hand, Tube: 7/8" OD", Rail Height: 2-1/8", Fastener: #10 FH
Sold: Each
|
|
462-359-GSRM Rail/Pipe Mount Description: Rail or pipe mount Sold: Each
|
|
462-656-MJ1206BBX " - All include a large 1/2" pull pin to activate the swivel mechanism
- Large comfort handle included on all models
- 1,200lb model includes a four bolt pin through design on mounting plate for superior side load support
- Durable clear zinc finish
- Includes mounting hardware and fit up to a 3"x5" trailer frame
"" - All include a large 1/2" pull pin to activate the swivel mechanism
- Large comfort handle included on all models
- Durable clear zinc finish
- Includes mounting hardware and fit up to a 3"x5" trailer frame
- 1000lb model includes a deep seated snap ring for side load support
- 1200lb & 1500lb models include a four bolt pin through design on mounting plate for superior side load support
" Max Load: 1200 lbs., Height: 23.25", Wheel Size: 6", Pkg.: Boxed Sold: Each
|
|
462-702-8M4000977 Considered essential for preventing damage to motor, shaft and head in rough water conditions or when trailering. Description: Ram Stabilizer Standard
|
|
462-702-8M4000978 Considered essential for preventing damage to motor, shaft and head in rough water conditions or when trailering. Description: Ram Stabilizer Long
|
|
