Generic

Dual trumpet horns meet U.S Coast Guard's C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 66'. 5-Year warranty.

Description: Single trumpet, Length: 16", Rating: 118 db, Volts: 12, Case: 12

Dual trumpet horns meet U.S Coast Guard's C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 66'. 5-Year warranty.

Description: Dual trumpet, Length: 18 1/4", Rating: 123 db, Volts: 12, Case: 6

Dual trumpet horns meet U.S Coast Guard's C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 66'. 5-Year warranty.

Description: Single trumpet, Length: 16", Rating: 118 db, Volts: 24, Case: 12

Dual trumpet horns meet U.S Coast Guard's C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 66'. 5-Year warranty.

Description: Dual trumpet, Length: 18 1/4", Rating: 123 db, Volts: 24, Case: 6

This latest generation programable, multi-stage voltage regulator ensures that batteries will charge faster and last longer. An exclusive belt load management system allows the user to control the max alternator charging output to ensure the horsepower load does not exceed the limits of the drive belt. When used with optional temp sensors the Max Charge will automatically monitor and respond to changes in alternator and battery temps and will discontinue charging to protect the batteries and charging system. Programmable for use with 7 different battery technologies, including standard flooded, deep cycle flooded, AGM, Optima spiral wound and gel batteries.

Description: MC Regulator w/Harness, 24V, Size: 4.8" x 3.2" x 1.5"

This latest generation programable, multi-stage voltage regulator ensures that batteries will charge faster and last longer. An exclusive belt load management system allows the user to control the max alternator charging output to ensure the horsepower load does not exceed the limits of the drive belt. When used with optional temp sensors the Max Charge will automatically monitor and respond to changes in alternator and battery temps and will discontinue charging to protect the batteries and charging system. Programmable for use with 7 different battery technologies, including standard flooded, deep cycle flooded, AGM, Optima spiral wound and gel batteries.

Description: MC Regulator, 24V, Size: 4.8" x 3.2" x 1.5"

Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process:
Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration proprietary Aquabloc^® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.
Turbine series filters are available in sizes to fit any application and are easy to service. MA models are UL Listed and Coast Guard approved for use on boats for hire and use a metal bowl.

GPH: 60/120, Micron: 30, Ports: 3/4"-16 UNF", Bowl: Metal, Size: 11-1/2" H x 14-1/2" W x 9-1/2" D"

Sold: Each

Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process:
Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration proprietary Aquabloc^® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.
Turbine series filters are available in sizes to fit any application and are easy to service. MA models are UL Listed and Coast Guard approved for use on boats for hire and use a metal bowl.

GPH: 60/120, Micron: 2, Ports: 3/4"-16 UNF", Bowl: Metal, Size: 11-1/2" H x 14-1/2" W x 9-1/2" D"

Sold: Each

Absorbs oil in bilge so remaining water may legally be pumped overboard. Made of material used to clean up major oil spills.Tie-downs keep boom in place. Will absorb 2 quarts of oil and yet repel water. Helps protect the environment and eliminate fines for pumping oil overboard.

Size: 4" x 15", Case: 12

Sold: Each

Gang: 12, Stud: 5/16"x 18, Terminal Screw: #10-32

Maxi-prop propeller anode - zinc

Fits: 2" shaft", Application: 2004 & Newer, Material: Zinc

Sold: Each

Maxi-prop propeller anode - zinc

Fits: 1-1/2", 1-3/4" shaft", Application: 2003 & Older, Material: Zinc

Sold: Each

Maxi-prop propeller anode - zinc

Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2001 & Older, Material: Zinc

Maxi-prop propeller anode - zinc

Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2002, Material: Zinc

Maxi-prop propeller anode - zinc

Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2003 & Newer, Material: Zinc

Maxi-prop propeller anode - zinc

Fits: 1-1/4", 1-3/8" shaft", Application: 2001 & Older, Material: Zinc

Maxi-prop propeller anode - zinc

Fits: 1-1/4", 1-3/8" shaft", Application: 2002, Material: Zinc

Maxi-prop propeller anode - zinc

Fits: 1-1/4", 1-3/8" shaft", Application: 2003 & Newer, Material: Zinc

Offers superior rust and corrosion protection and offers greater stability at high and low temperatures. Recommended for steering cables, fishing reels, all gears, and all metals.

Size: 3 oz., Case: 12

Sold: Each

McGard Volvo Duo-Propeller Lock

• Overall Lock Length: 0.750"
• Thread Size: M12 x 1.75
• Hex Size: 5/8"

The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security.