462-354-4315401 Dual trumpet horns meet U.S Coast Guard's C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 66'. 5-Year warranty. Description: Dual trumpet, Length: 18 1/4", Rating: 123 db, Volts: 24, Case: 6
|
|
462-684-MC624H This latest generation programable, multi-stage voltage regulator ensures that batteries will charge faster and last longer. An exclusive belt load management system allows the user to control the max alternator charging output to ensure the horsepower load does not exceed the limits of the drive belt. When used with optional temp sensors the Max Charge will automatically monitor and respond to changes in alternator and battery temps and will discontinue charging to protect the batteries and charging system. Programmable for use with 7 different battery technologies, including standard flooded, deep cycle flooded, AGM, Optima spiral wound and gel batteries. Description: MC Regulator w/Harness, 24V, Size: 4.8" x 3.2" x 1.5"
|
|
462-684-MC624 This latest generation programable, multi-stage voltage regulator ensures that batteries will charge faster and last longer. An exclusive belt load management system allows the user to control the max alternator charging output to ensure the horsepower load does not exceed the limits of the drive belt. When used with optional temp sensors the Max Charge will automatically monitor and respond to changes in alternator and battery temps and will discontinue charging to protect the batteries and charging system. Programmable for use with 7 different battery technologies, including standard flooded, deep cycle flooded, AGM, Optima spiral wound and gel batteries. Description: MC Regulator, 24V, Size: 4.8" x 3.2" x 1.5"
|
|
462-62-75500MAX30 Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process:
Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration proprietary Aquabloc® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.
Turbine series filters are available in sizes to fit any application and are easy to service. MA models are UL Listed and Coast Guard approved for use on boats for hire and use a metal bowl. GPH: 60/120, Micron: 30, Ports: 3/4"-16 UNF", Bowl: Metal, Size: 11-1/2" H x 14-1/2" W x 9-1/2" D" Sold: Each
|
|
462-62-75500MAX2 Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process:
Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration proprietary Aquabloc® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.
Turbine series filters are available in sizes to fit any application and are easy to service. MA models are UL Listed and Coast Guard approved for use on boats for hire and use a metal bowl. GPH: 60/120, Micron: 2, Ports: 3/4"-16 UNF", Bowl: Metal, Size: 11-1/2" H x 14-1/2" W x 9-1/2" D" Sold: Each
|
|
462-74-86805 Absorbs oil in bilge so remaining water may legally be pumped overboard. Made of material used to clean up major oil spills.Tie-downs keep boom in place. Will absorb 2 quarts of oil and yet repel water. Helps protect the environment and eliminate fines for pumping oil overboard. Size: 4" x 15", Case: 12 Sold: Each
|
|
462-661-2105 Designed for heavy duty positive or negative busing. Features tin-plated copper bus and stainless steal hardware. 48 Volts DC maximum rating. Gang: 12, Stud: 5/16"x 18, Terminal Screw: #10-32
|
|
462-70-70M Maxi-prop propeller anode - zinc Fits: 1-1/4", 1-3/8" shaft", Application: 2001 & Older, Material: Zinc
|
|
462-70-70M2 Maxi-prop propeller anode - zinc Fits: 1-1/4", 1-3/8" shaft", Application: 2002, Material: Zinc
|
|
462-70-70M3 Maxi-prop propeller anode - zinc Fits: 1-1/4", 1-3/8" shaft", Application: 2003 & Newer, Material: Zinc
|
|
462-70-63M Maxi-prop propeller anode - zinc Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2001 & Older, Material: Zinc
|
|
462-70-63M2 Maxi-prop propeller anode - zinc Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2002, Material: Zinc
|
|
462-70-63M3 Maxi-prop propeller anode - zinc Fits: 3/4", 7/8", 1", 1-1/8" shaft", Application: 2003 & Newer, Material: Zinc
|
|
462-70-100M Maxi-prop propeller anode - zinc
Fits: 2" shaft", Application: 2004 & Newer, Material: Zinc
Sold: Each
|
|
462-70-83M Maxi-prop propeller anode - zinc
Fits: 1-1/2", 1-3/4" shaft", Application: 2003 & Older, Material: Zinc
Sold: Each
|
|
462-166-422 Offers superior rust and corrosion protection and offers greater stability at high and low temperatures. Recommended for steering cables, fishing reels, all gears, and all metals. Size: 3 oz., Case: 12 Sold: Each
|
|
560-74046 McGard Volvo Duo-Propeller Lock
- Overall Lock Length: 0.750"
- Thread Size: M12 x 1.75
- Hex Size: 5/8"
Stern Drive Applications: Volvo Duo-Prop (will only fit 1993 and 1994 drives using a propeller bolt with a 19 mm hex).
The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Fast-acting and open quickly to protect circuits from overloads and short circuits. Fuse: MDL, Size: 1/4" x 1-1/4", Amps: 10, Pack: 2 Sold: Pack
|
|
160-10-1043-05 Mechanical Seal
|
|
462-32-54010 Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul. The Spoiler's unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white. Dia.: 13", Length: 24", Color: Orange, Buoyancy: 84 lbs, Case: 5
|
|
