Generic

Bronze, full flow, low profile drain & grounding screw. Hard chromed bronze ball, vinyl coated stainless steel handle. UL Labeled.

Ports: 3/4"

Sold: Each

ID: 3-7/8", OD: 5-5/8", Hole: 4-1/2", Color: Black

ID: 3-7/8", OD: 5-5/8", Hole: 4-1/2", Color: White

ID: 5-7/8", OD: 8", Hole: 6-1/4", Color: Black

ID: 5-7/8", OD: 8", Hole: 6-1/4", Color: White

Lower Actuator Hinge Pin

Ref #: 22, Description: Actuator Lower Hinge Pin

Sold: Each

Lower Housing Kit for 2088 Series. Figure 2.

Fig.: 2, Description: Lower Housing Kit, Fits: Standard/Deluxe

Sold: Each

Is your boat engine's lower unit safe from theft. Don't be fooled, a thief can steal your lower unit in minutes. Protect yourself with The Pather Security Systems New Tamper Resistant Lock Kit. These tamper resistant bolts and nuts replace your existing lower unit bolt(s) and nut. Both require the unique Tamper Resistant Tool to install and remove. Each with a unique pin configuration to deter even a professional thief. The high strength bell washer protects against utilizing any other clamping device to remove the bolt and/or nut, deterring the boldest of thieves. Constructed of marine grade stainless steel to prevent rust and corrosion.

Description: "Yamaha Dual - 25" Shaft, Short Bolt Up to 150 HP"

Sold: Each

Is your boat engine's lower unit safe from theft. Don't be fooled, a thief can steal your lower unit in minutes. Protect yourself with The Pather Security Systems New Tamper Resistant Lock Kit. These tamper resistant bolts and nuts replace your existing lower unit bolt(s) and nut. Both require the unique Tamper Resistant Tool to install and remove. Each with a unique pin configuration to deter even a professional thief. The high strength bell washer protects against utilizing any other clamping device to remove the bolt and/or nut, deterring the boldest of thieves. Constructed of marine grade stainless steel to prevent rust and corrosion.

Description: "Yamaha Single- 25" Shaft, Short Bolt Up to 150 hp"

Sold: Each

Description: Evinrude/Johnson Dual - 150-300 HP

Lower Unit Seal Kit

Description: Lower Unit Seal Kit - Volvo SX Thru 2006, 3855275

Sold: Each

Replaces: 26-816575A3

Sold: Bag

LP Pro 900 GPH Automatic 12v

Features:
• Size: 9.3"L x 2.3"W x 2.3"H
• Port configurations: Straight: 3/4", 1", 1-1/8" | 90°: 3/4"
• Includes straight and 90° nozzles

LS Front Port Alternator Adjusting Arm

LS Steam Tube Kit w/ Stainless Steel Hard Line Tubing

Earl's hard line steam tube kit is designed to eliminate trapped air and steam from your engine to prevent hot spots & overheating. Easy bolt-on installation when used with pivoting steam vent adapters - part #625-4521 (2 sets required). Made from attractive stainless steel tubing & black anodized components.

This steam tube kit works w/ the Holley LS Hi-Ram, Holley Single Plane, and Sniper Fabricated Intake Manifolds for the GM LS Engine.

Features:

• Steam Tube Kit Eliminates Trapped Air and Steam from Your Engine to Prevent Hot Spots & Overheating
• Custom Look That is More Attractive than Original Equipment (OE) Hard Lines
• Use w/ Adjustable Pivoting Steam Vent Adapters for Easy Installation
• Four Corner Style - Allows Flow of Steam & Coolant from Front & Back of Cylinder Heads
• Made from Stainless Steel Tubing & Black Anodized Aluminum Components – for Corrosion Protection & a Great Look
• Outlet Size - Use w/ 1/4" Hose

The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance boats. Replace the rigid hard lines with these adjustable outlet, O-ring seal adapters that converts to -3 or -4 AN plumbing. These steam tube adapters are the most adjustable and lowest profile available. These adapters LOOK as nice as they are installation friendly. There are 6 kits available to allow for the optimal routing on your application including at dual outlet option which eliminates needing a T adapter. -3 Single Out Vent Adapters (One Pair).

GM LS Marine engine conversions have grown at a speed no one could have gauged until now. Hardin Marine has been at the forefront of the LS marine engine movement for the past number of years bringing to market a cooling system and exhaust option.

But one hurdle of the engine swap on popular Bravo/Alpha applications has left boaters to fend for themselves on solutions or makeshift homegrown engine mount remedies. So the folks at Hardin took to build a direct replacement engine block mount that allows a popular GM LS1, LS2, LS3 to be dropped right back onto the OEM Stud factory mount or the High Performance Hardin Marine stud mount #620-52380. Sea Pump #625-4117 will not work with these brackets.

LS-M Marine Aluminum Exhaust Manifold system for GM LS BASED 4.8, 5.3, 6.0, 6.2

These Next generation NEW LS-M series Aluminum exhaust manifold system is a perfect complement to OEM GM LS based engine platforms up to the GM LSA of 550HP. The New LS-M Series Manifolds feature DUAL O2 sensor bung provisions mounted sleekly with one in each exhaust riser. The LS-M series exhaust system also features the ability to be plumbed for either fresh water or closed cooling options. 4" exhaust hose connection is standard. Yet another new feature of the LS-M manifolds is their corrosive hard anodizing feature to yet extend longevity in harsh environments. These manifolds were developed on OEM performance engines and are NOT for use with engines using a camshaft with more than .226 @ .050 Camshaft Duration.

ATTENTION** This Exhaust System is sold in a Painted Industrial finish. Installers will be required to apply further extensive aesthetic final detail finishing. The outside is ROUGH machine and sanded aluminum with Industrial grade painting. Additional Sanding, Polishing, Powder coating or Painting is the responsibility of the purchaser!

For filling lower units on outboards and stern drives. Designed for use with Sierra's 96005,96205, and 96505.

:

Sold: Each

Fits standard quart plastic bottles. For adding oil and other fluid to small engines. Flexible hose gets hard to reach fill plugs. Comes complete with metal threaded filler fitting.

Description: Fitting, Fits: Yamaha, Tohatsu, Nissan

Sold: Each