462-622-15052101 "Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit includes:
- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
" Kit includes:- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
Size: 4" x 12", Finish: Standard finish, Volts: 12 Sold: Each
|
|
462-32-1006 Mounting band snaps on any rail, lifeline or stanchion. Snap bottom band around coil of rope, wire or electric cord. Size: 9-1/2" L
|
|
462-1-SA27361P Link Arm Kit OMC/Johnson/Evinrude Description: J/E Link Arm Kit Sold: Each
|
|
|
|
|
160-10-1342-03 Kit #11 - Lip seal back up plate (Qty 1)
|
|
462-639-700115 Fights oxidation to improve conductivity. Penetrates aluminum oxide to maintain current paths. Temperature rated 40°-500°F.
Description: Dielectric Silicone Compound, Size: 1/3 oz.
Sold: Each
|
|
462-244-845 Heavy duty liquid wax. Use where durability, high gloss and lasting protection are paramount. Very easy to use - requires minimum rubbing or buffing. Clear coat safe.
Description: Liquid Insulator Wax, Size: Pint, Case: 12
Sold: Each
|
|
462-79-MDR740 Protects against corrosion. Ideal for battery switches and terminals, bilge pumps and electrical connections. Dielectric, resists moisture and acids. Prevents vibration. Prevents bilge pump failure due to moisture wicking in butt connector on wiring in bilge. Water-based formula for easy cleanup with just water.
Size: 4 oz.
Sold: Each
|
|
462-108-770055 Liquid MareLube™ is designed for valves where access is difficult or convenience is desired. Simply pour Liquid MareLube into the system through the valve tailpipe or hose, and activate the handle of the valve. This is a true Readily Biodegradable and biorenewable liquid lubricant developed for the regular maintenance of marine valves and seacocks. This valve service should be performed several times a season to reduce marine growth and keep seals lubricated. Size: 16oz. Sold: Each
|
|
462-639-765012 Provides low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round and flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300 ft. (150 PSIG).
Description: Flat, Wire Range: 14/2-12/3, Cable Size: ---
|
|
462-9-1089DP1BLK Black fiber reinforced plastic. Hinged, water resistant. Fits Perko 0931 and 0932.
Size: 2-3/4" x 3-1/4"
Sold: Each
|
|
462-148-10107 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: Mercury engines 200 OpitMax, 255 OptiMax, 225HP EFI, 250HP EFI
Sold: Each
|
|
160-14-0721-02 Lock Washer
|
|
160-14-0722-01 Lock washer
|
|
160-14-1895-00 Lock washer
|
|
462-220-580400 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Bent Pin Lock, Finish: Chrome, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580401 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Dog Bone Lock, Finish: Chrome, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580402 These receiver locks are safe and secure to keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Description: Dog Bone Lock, Finish: Stainless Steel, Size: 5/8", Receiver: Class III-IV
|
|
462-220-580410 Rotating lock housing provides easy key access. These locks fit around the coupler making it impossible to hitch to anyone's vehicle. Covered key slot helps prevent dust and corrosion in the locking mechanism. 580409 features a long shaft for multiple coupler applications.
|
|
462-220-580409 Rotating lock housing provides easy key access. These locks fit around the coupler making it impossible to hitch to anyone's vehicle. Covered key slot helps prevent dust and corrosion in the locking mechanism. 580409 features a long shaft for multiple coupler applications.
|
|
