Generic

USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.

Housing: White, Size: 3-1/4" L x 2" W x 1-1/8" H ", Volts: 12, Pack: 2

Sold: Box

These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC.

Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible.

Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!

• Fully potted electronics and stainless steel housing allow for interior and exterior mounting-even underwater!
• Rated for 50,000+ hours of life
• For 12 VDC systems. 1.5 Watts @ 12V.

LED Color: White, Mount: Horizontal, Size: 3" L x 3/4" W

Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".

Description: White Backup Light

Injection molded polycarbonate. 360° all around lghts are approved for USCG 2 NM. #12 RH fastener.

A: 4-5/16", B: 1-1/8", C: 2-1/4"

Sold: Each

LED Color: Blue or White

LED Bulb for Innovative Lighting Pop-Up Stern Lights

LED CLEAR/SIDE LIGHT RECT. AMBR

Wesbar Waterproof Rectangle Side/Clearance Lights feature a snap lock base mount

LED CLEAR/SIDE LIGHT RECT. AMBR

Wesbar Waterproof Rectangle Side/Clearance Lights feature a snap lock base mount.

Lens: Amber

Sold: Each

Lens: Red

Sold: Each

Stamped 304 stainless steel and plastic. Utilizes one bright white LED that draws very low amperage and has very long life.

LED Color: White, A: 1-1/2", B: 11/16", C: 1"

Plastic lights have 9 blue LEDs in each light. 12 VDC, low amp draw.

• Plastic


• 9 LED's in each light


• Rated at 12 VDC

Housing: White, LED Color: Blue, A: 3-1/8", B: 1/2", C: 2"

Sold: Each

Plastic housing, 15 white LED's and 5 red LED's per light. #8 RH fastener. These lights have very low current consumption at .068 amps at 12 volts, have extreme long life, give off very low heat and are resistant to vibration.

Color: Chrome, A: 4", B: 5-3/4"

Plastic housing, 15 white LED's and 5 red LED's per light. #8 RH fastener. These lights have very low current consumption at .068 amps at 12 volts, have extreme long life, give off very low heat and are resistant to vibration.

Color: White, A: 4", B: 5-3/4"

Plastic housing, 18 white LED's per light. #8 RH fastener. These lights have very low current consumption at .068 amps at 12 volts, have extreme long life, give off very low heat and are resistant to vibration.

Color: Chrome, A: 4", B: 5-3/4"

Plastic housing, 18 white LED's per light. #8 RH fastener. These lights have very low current consumption at .068 amps at 12 volts, have extreme long life, give off very low heat and are resistant to vibration.

Color: White, A: 4", B: 5-3/4"

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• SMD 5050 LED
• Fits 14mm Flex-Trak mounting channel
• Wired on both ends
• Mounting clips included
• End caps included

Length: 16', Width: 14mm, LED Colors: Blue-White or Red-White, LEDs: 60/Meter

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• Wired on both ends
• SMD 5050 LED
• Blue, Red or Cool White or dual color
• Fits: 14mm Flex-Trak mounting channel
• Mounting clips included
• End caps included

Lengths: 21" or 48", Width: 14mm, LED Color: Blue-White, LEDs: 60/Meter

Strips can be cut on the cut-marks and can be wired together to make longer runs.

• Short lengths are wired on both ends
• 16' Reels can be cut on cut marks and sealed with end caps
• 16' Reels can be wired together for long runs
• IP-68 waterproof
• SMD 5050 LED
• Fits 14mm Flex-Trak mounting channel
• Mounting clips included
• End caps included

Lengths: 21" or 48", Width: 14mm, LED Color: Red-White, LEDs: 60/Meter

"A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.
Includes light w/flange & pigtail."

Size: 7-7/8" w/Flange"

Sold: Each