Generic

LANYARD W/STRAIGHT RELEASE 6"

Seadog Lanyards with Release Pins feature 304 stainless steel hardware and 6" lanyards with an overall length of 10".

LANYARD W/TOGGLE PIN 6"

The Seadog Toggle Pin and Lanyard features 304 stainless steel hardware and a 6" lanyard with an overall length of 10". Available with a straight release toggle pin.

Stainless Steel.
URM2: Heavy-gauge model, built for holding Danforth and Fortress (through FX 23) on sail or power boats. The flared mounting tips help to eliminate chafe. Bolt-on mounting.
URM4: Heavy-duty design to hold Danforth^® 13-28 lbs., Fortress^® and Delta type anchors. Ideal for mounting where there is limited deck space.
URM3: Heavy-duty. Securely stows Danforth, Fortress, and Delta type anchors for sail and power boats. Stainless bail. Chafe-free design.

Line Size: "Up to 1-1/2", Max Chain: 1/2", Max Anchor: 12-60 lbs., Boat Size: 25'-54', Size: 22-3/4" x 4-1/4"

• Have all three coolers fit into one.
• The 24 pack, 36 pack & 48 Pack.
• Instead of buying one cooler this year, then another one the following year buy them all at once and save!

"Made from super-tough poly material which resists sunlight, breakage and chemicals. The holder is UV tested and will not fade as others do. Hose fitting on the bottom to accept a 3/8" I.D. hose. Any spills, spray or rain water can be drained to the bilge area."

Color: Black, Size: 4-5/16" OD x 4-1/4" D", Hole: 4-1/4"

"Made from super-tough poly material which resists sunlight, breakage and chemicals. The holder is UV tested and will not fade as others do. Hose fitting on the bottom to accept a 3/8" I.D. hose. Any spills, spray or rain water can be drained to the bilge area."

Color: White, Size: 4-5/16" OD x 4-1/4" D", Hole: 4-1/4"

This tool is the easiest way to remove impellers, especially when the pump is mounted in tight, cramped conditions. It removes the risk of expensive damage to the pump or housing and is manufactured from corrosion resistant cast aluminum and stainless steel.

Size: "For Impellers up to 2-1/2" - 4-1/2"

Sold: Each

Large 3-finger pull - black
Convenient rectangular shape
Easy to install
Size: 3-1/2" x 2-1/4", Hole: 1-1/2"

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 6502, Pack: 4

Sold: Each

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 7901, Pack: 4

Sold: Each

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion


• Sold in standard pack only

• Original equipment on many late model applications


• Iridium at the fine-wire center electrode and platinum at the ground electrode provides maximum durability and performance


• The platinum at the ground electrode adds extra protection against plug wear and gap erosion

Model #: 6289, Pack: 4

Sold: Each

Latch Dog Assembly

Description: Latch Dog Assembly

Sold: Each

Description: Latch Dog Assembly

Sold: Each

Made of marine grade polymer or stainless steel.

• Supplied with multiple backing plates to fit any door thickness .075" to .875" thick


• Locking models supplied with set of keys


• Easy two bolt installation


• Locking and Non-Locking latches available


• Fits standard 2 Inch hole cutout

Size: 2-3/8" dia.", Type: Locking, Color: Black

Sold: Each

Made of marine grade polymer or stainless steel.

• Supplied with multiple backing plates to fit any door thickness .075" to .875" thick


• Locking models supplied with set of keys


• Easy two bolt installation


• Locking and Non-Locking latches available


• Fits standard 2 Inch hole cutout

Size: 2-3/8" dia.", Type: Non-Locking, Color: Black

Sold: Each

"Low profile. Fits up to 3/4" door. Chrome."

:

Sold: Each

Non-corrosive, UV resistant. Hardware is concealed when latched. Latch reduces vibration. Used on motorboxes, doors, and other closures. Stainless hardware, OEM approved.

:

Sold: Each

"Designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from polished, cast 316 stainless steel. Round design enhances any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening. The Latch-tite™ series is for applications that require heavy-duty, high performance construction and a high quality appearance.

• Unique patented stainless steel shaft with bushing and twin Nitrile "O" rings for greater protection against water penetration
• Over center anti-rattle handles provide quiet operation
• Concealed fasteners

Size: 3", Fastener: #8

Sold: Each

Cleans, polishes, preserves. Recommended for use on leather and vinyl automotive, marine, aeronautical and household upholstery. Not recommended for suede or buck.

Description: Leather & Vinyl Wax, Size: Pint, Case: 12

Sold: Each

Two high power Cree LED bulbs provide 1300 Lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Six regular LED bulbs on the top array have a wide angle beam of 90° to illuminate a large portion of the dock area. Surface mount with a small footprint makes for easy installation, and these lights are waterproof with an IP rating of 68. Front lights and top lights can be controlled separately. Stamped 304 stainless. Lumens 300. Amp Draw .28@12V. Fastener#8 RH.

A: " 3-9/16", B: 2-5/8", Pack: 1 pr.

Sold: Pack