Generic

"EPA COMPLIANT
Fuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant."

Application: Yamaha, Size: 3/8" x 6'

Sold: Each

Used on a fuel fill nozzle either at the pump or a fuel jug using MYCELX infused material. Catches drips and splashes from fuel filling nozzles in marine applications.

:

Sold: Each

Fuel Level Sender with Return Port

Designed for top mounting in aluminum, plastic or stainless steel fuel tanks in all types of marine vessels. All stainless steel construction resists corrosion and is ethanol compliant. Meets and exceeds current NMMA and ABYC specifications. SS 1/4" NPT female thread with 3/8" barb. 1/4" ground spade terminal. Pre-bent 90 degree float arm.

• 6" to 24" tank depth
• Will not rust or corrode
• Calibrated for 240-33 ohm gauges
  • (240 ohm empty and 33 ohm full)
• Adjusts easily to fit your tank
• Tested to insure accurate readings

Note: Includes gasket and hardware

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Universal, Rating: B1-15, Size: 3/8" ID x 120" L"

Sold: Each

"EPA/CARB COMPLIANT
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Universal, Rating: B1-15, Size: 3/8" ID x 80" L"

Sold: Each

"EPA/CARB COMPLIANT
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Universal, Rating: B1-15, Size: 5/16" ID x 80" L"

Sold: Each

Fuel Pump - Johnson/Evinrude

Description: Fits: 6/8/9.9/15 hp (1992 & Up) , Replaces: 397839, 391638, 395091, 397274

Sold: Each

Fuel Pump - Johnson/Evinrude

Description: Fits: 25-55 hp (1976-89), non-VRO , Replaces: 438556, 382354, 385781, 388268, 394543, 395713, 398338, 398387, 432451, 433387

Sold: Each

Contains Gasket(rear), diaphragm (rear), gasket (front/top) diaphragm (front/top)

Fits: V4-V6, OEM #: 6E5-24411-00-00

Sold: Bag

Fuel Pump Relay, Crusader

Replaces: R130012, Application: For Fuel Pump on Crusader MEFI systems

Sold: Each

Fuel Pump Yamaha #66K-13907-00

Replaces: 66K-13907-00

Sold: Each

Fuel Pump Yamaha #68F-13907-00

Replaces: 68F-13907-00, 68F-13907-01

Sold: Each

Fuel Pump Yamaha #68V-13907-00

Replaces: 68V-13907-00, 68V-13907-03

Sold: Each

Connector: Tank Fitting - Male, Fits: 88896, Material: Machined brass, Thread: 1/4" NPT, Hose: -, OEM #: OMC 502867

Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.
LP = Low Permeation

Connector: Tank Fitting - Male, Fits: 88966, Material: Machined brass, Thread: 1/4" NPT", Hose: 0, OEM #: Yamaha 6Y1-24305-04

Sold: Each

"This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware."

Length: 62"

Sold: Pack

"Replace aging fuel tanks and maximize your fuel capacity space with a Moeller below-deck, permanent tank. Tank system installation kit contains all the parts to install the fuel-fill and through-hull ventilation system. Includes deck fill, hose clamps, chrome/brass thru-hull vent, 1-1/2" fuel fill hose, and 25" of 5/8" vent hose with 5/8" brass hose barb."

Description: Permanent Fuel Tank Installation Kit

Sold: Each

"Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS)."

Size: 1 oz

Sold: Each

Compact bracket and separator kit for outboards up to 115hp with 10 micron.

Contains: Bracket: 7774/Filter: 7865, Replaces: Yamaha MAR-MINIF-LT-AS

Sold: Each

Fuel/Water Separator Assembly

Contains: High Capacity Filter.
Replaces Volvo 3847644

Sold: Each