Generic

GM 3.0L Water Pump

Application: Late Model 3.0L 4 cylinder GM engines requiring hose fittings, Replaces: Mercruiser: 884727

Sold: Each

Used, a lot of surface rust, square bore carb.

• Available: (1) One
• SOLD AS IS
• NON RETURNABLE

Please study photo carefully, item is sold as shown.

GM LS Series Remote Oil Filter Adapter

• Replaces Moroso Spin-On oil filter adapter on Moroso #'s 20142, 20143 & 20151 oil pans, comes standard on Moroso # 20146 oil pan.
• Ideal when chasis restrictions don't allow the use of block mounted filter or when a larger external filter is desires.
• Billet aluminum construction
• -10 AN "In" and "Out" ports
• Includes mounting hardware and engine block sealing O-Rings

GM LS Series Remote Oil Filter Adapter - 90 Degree

This billet aluminum adapter is designed to install under the pan rail of  LS1 pans and provide inlet and outlet ports for installing lines to a remote oil filter. Adapter features o-ring seals between the pan and the adapter and 1-1/16" -12 AN oil inlet and outlet ports.

• 1/2 NPT Inlet and Outlet 
• Ports are set at 90 Degrees
• Lightweight Billet Design

GM LS Series Remote Side Mount Oil Filter Adapter

Earl's billet side mount oil cooler adapters are the slick way to add an oil cooler to your GM LS or Gen-V LT engine. The slim design of these adapters clear most headers and other components and feature -10 AN male connections. These adapters are black anodized and use O-Ring seals for a leak free installation. Fits OEM & Holley Wet Sump oil pans only (Does not Fit Dry Sump Engines).

• Billet Aluminum w/ Black Anodized Finish
• Includes 0-Ring Seal & Hardware
• (2) 1/8” NPT Accessory Ports
• -10 AN Male Connections
• Available w/ 180 Degree Thermostat
• Add an Earl’s Oil Cooler and AN Plumbing to Complete the Installation

GM LS Series, Rear Sump Swap Oil Pan

Wet Sump, 5 Quart Capacity, 5'5" Deep, 8.5" Wide, 8.375" Long
Engine Application: GM LS Series
Fits: LS Engine Conversions that require a Rear Sump
1/2"-20 drain plug

• Oil pan has a thick precision laser cut steel rail with a durable fabricated steel sump plated with a clear zinc finish
• Fabricated, durable steel construction is more adaptable to add fittings, change finishes and weighs les than cast aluminum construction.
• Clears 4.25" stroke with most steel rods
• Front of the oil pan is 1.813" Deep to the beginning of the 5.5" deep sump.
• The fabricated steel sump is 5.5" Deep, 8.5" Wide, and 8.375" Long
• Removable anti-slosh baffle
• Features a billet aluminum adapter that allows a 13/16" thread Moroso or OEM oil filter to be mounted in the stock location, no need to run a remote oil filter.
• Designed to be used with Moroso 740-24050 Oil Pump Pickup
• Magnetic drain plug and uses a stock dipstick

Size: 3/4" dia. x 3-3/8" L, Plug: N/A-Zinc Only, Thread: 5/8"-11, Material: Zinc

Cast brass. Chrome finish. Carded.

Finish: Chrome, A: 5-1/16", B: 15/16", C: 3/4", D: 5-5/8", Fastener: #6

Sold: Each

Provides accurate speed over ground readings and heading information all in one attractive package. This product is ideal for all speed applications and is particularly useful for slow and high speeds where traditional speed sensors like pitot tubes and paddlewheels do not perform well. An added advantage is there is nothing in the water to corrode or break.
Features:
Included LCD heading display to show course over ground
Connects to an existing NMEA 0183 GPS device (not included)
Speed accuracy of +/-1 MPH (once moving)
Heading accuracy of +/-1 degree (once moving)
Enhanched illumination: through-dial lighting for excellent readability at night

Cable Length: 4'

Sold: Each

Size: 1/2" x 36', Pack: Plastic Pail

Size: 3/16" x 250', Pack: Plastic Pail

Size: 3/8" x 63', Pack: Plastic Pail

Size: 5/16" x 92', Pack: Plastic Pail

Color: Gray

"Type FD (deep). Molded ridge around face further prevents water from getting between box and cover plate. 4-9/16" high x 2-15/16" wide x 3-1/4" deep. Has a 22 cubic inch capacity."

Color: Gray, Cut Out: "Two 3/4" IPS", Material: Thermoplastic

Sold: Each

Convenient, one-hand application. Heavy duty design. Comes with 3 oz cartridge of marine wheel bearing grease.

Greaseable Replacement U-Joint 1310

• Overall Dimensions: 3.5 x 3.6 x 1.3 inches
• Bearing Cap Diameter (In):  1.062 X 1.062 inches
• Cap 1: 1.063 inches
• Stack 1: 3.219 inches
• Greaseable:  Yes
• Lube: Y
• Note: Flush lube fitting in cross

Superior rust and corrosion protection from salt water, salt air and atmospheric chemicals. Special water-insoluble formula is highly resistant to wash-out. Recommended for corrosive marine applications: trailer wheel bearings, water pumps, hinges, pins, winches, and anchor chains.

Size: 14 oz. Cartridge, Case: 12

Superior rust and corrosion protection from salt water, salt air and atmospheric chemicals. Special water-insoluble formula is highly resistant to wash-out. Recommended for corrosive marine applications: trailer wheel bearings, water pumps, hinges, pins, winches, and anchor chains.

Size: 1 lb. Tub, Case: 12

See Jabsco Impeller Cross Reference and Impeller Identification Guide for impeller silhouettes and drive types.

Fig.: H, Type: Grn. Polyurethane (24 Pk), Blades: 6, Size: 2", Depth: 7/8", Drive Type: 4

Sold: Box