Generic

The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.

• Dual function mechanical controls can be used in a dual station boat
• Side mount controls can now be used in dual station boats
• You only require one station selector for both a single engine or dual station boats
• Using the recommended XTREME control cables allow smooth control operation
• The Inboard/Sterndrive DS throttle unit is a pull only set up. For a push throttle use the outboard DS throttle unit

• 2 DS Gear Unit (207573)
• 2 DS Throttle Unit (177030 for I/B, 207572 for O/B)
• 1 Station Selector Unit (204993)
• 2 Cables from Selector to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Gear Unit (CCX633xx)
• 2 Cables from DS Gear Units to transmissions (CCX633xx)
• 1 Cable from Port Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)
• 2 Cables from DS Throttle Unit to Engine (CCX633xx)
• 2 Engine Adapter Kits for Control Cables (unless provided by mfg)

Description: Dual Station Gear Shift Unit

The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash space or for use with side mounted controls in two stations. Just put both levers in neutral, turn the selector switch, and you have changed stations. Teleflex recommends to only use CCX633xx cables with the DS Unit. Note: Throttle cables should be a pull to advance throttle set up. Engine adapter kits for the control cables are needed unless provided by the manufacturer. Control boxes not included.

• Dual function mechanical controls can be used in a dual station boat
• Side mount controls can now be used in dual station boats
• You only require one station selector for both a single engine or dual station boats
• Using the recommended XTREME control cables allow smooth control operation
• The Inboard/Sterndrive DS throttle unit is a pull only set up. For a push throttle use the outboard DS throttle unit

• 2 DS Gear Unit (207573)
• 2 DS Throttle Unit (177030 for I/B, 207572 for O/B)
• 1 Station Selector Unit (204993)
• 2 Cables from Selector to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Gear Unit (CCX633xx)
• 2 Cables from DS Gear Units to transmissions (CCX633xx)
• 1 Cable from Port Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)
• 2 Cables from DS Throttle Unit to Engine (CCX633xx)
• 2 Engine Adapter Kits for Control Cables (unless provided by mfg)

Description: Dual Station Selector Unit

Single Engine Dual Station Requirements:
• 1 DS Gear Unit (207573)
• 1 DS Throttle Unit (177030 for I/B, 207572 for O/B)
• 1 Station Selector Unit (204993)
• 1 Cable from Selector to DS Gear Unit (CCX633xx)
• 1 Cable from Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Station 2 to DS Gear Unit (CCX633xx)
• 1 Cable from DS Gear Unit to transmission (CCX633xx)
• 1 Cable from Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Station 2 to DS Throttle Unit (CCX633xx)
• 1 Cable from DS Throttle Unit to Engine (CCX633xx)
• 1 Engine Adapter Kit for Control Cables (unless provided by mfg)

Dual Engine Dual Stations Requirements:
• 2 DS Gear Unit (207573)
• 2 DS Throttle Unit (177030 for I/B, 207572 for O/B)
• 1 Station Selector Unit (204993)
• 2 Cables from Selector to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Gear Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Gear Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Gear Unit (CCX633xx)
• 2 Cables from DS Gear Units to transmissions (CCX633xx)
• 1 Cable from Port Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 1 to DS Throttle Unit (CCX633xx)
• 1 Cable from Port Station 2 to DS Throttle Unit (CCX633xx)
• 1 Cable from Starboard Station 2 to DS Throttle Unit (CCX633xx)
• 2 Cables from DS Throttle Unit to Engine (CCX633xx)
• 2 Engine Adapter Kits for Control Cables (unless provided by mfg)

Description: Dual Station Gear Shift Unit

Size: 18.5" L x 8" W x 5" H, Volts: 24, Max Amps: 5

Size: 18.5" L x 8" W x 5" H, Volts: 12, Max Amps: 10

Dual USB Charger Socket Black

Blue Sea Systems Dual USB Chargers provide 12VDC power to charge small electronic devices.

Features:
• Max current output: 2.1ADC
• Input voltage: 12VDC
• Output voltage: 5VDC +/- 5%
• Current draw: 15mA
• Charger socket mounts into a 12V outlet hole

Provides better towing vision than any towing mirror out there! This innovative product features two fully adjustable mirror surfaces that allow you to fully customize your viewing area. The large, flat mirror surface gives an accurate perspective of what is behind you, while the smaller convex surface acts as a built-in spot mirror for increased safety while driving. The fully enclosed mirror head design reduces wind vibration, to ensure that the adjustable mirror surfaces stay where you put them. Features two adjustable arms and rubber straps that will not obstruct your existing mirror.

:

Sold: Each

Fits: Mercury and E-Tec Engine with Nose Cone Dual Water Pickup.

Sold: Each

Injected Molded Nylon. Mounts easily to most surfaces with suction cups. Expands from dual to quad, mounts easily to most surfaces with suction cups.

Description: Dual/Quad, Size: 8-1/8" Wide (Expands to 16-3/8")", Case: 6

Sold: Each

Combine negative and positive buses on one block. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 amps. Maximum 48 volts DC. Gang: 10, Terminal Screw: #8-32

Features heat resistant melamine body and abuse resistant nylon face.
Use where salt or other corrosive elements are a problem
Yellow corrosion resistant duplex receptacle
15 Amp 125 Volt

• Features heat resistant melamine body and abuse resistant nylon face.


• Use where salt or other corrosive elements are a problem


• Yellow corrosion resistant duplex receptacle


• 15 Amp 125 Volt

:

Sold: Each

NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people or loads over where people could be present. Used for Boat Lifts.
NOTE: Not for movement of humans

Max Load: 3000 lbs, Amps: 70, Volts: 12

Sold: Each

Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. Zinc TUFFPLATE finish. Handle included.
NOTE: Not for movement of humans

Description: DLB1200A, Max Load: 1200 lbs, Gear Ratio: 5.4:1, Cable Size: 7/32" x 69'

Sold: Each

For mounting all StrongArm electric winches to trailer winch stands where insufficient room and improper angle are present. Black powder-coated finish. Hardware included.

Description: Angle mounting plate

Sold: Each

Fits 6-16 gauge wire. For 12Volt DC winches.

:

Sold: Each

"For 120 volt AC StrongArm winch models. This kit provides a 10-foot remote hand-held switch unit which can be wired directly to the winch. (Plug-in connector #6373 is optional.) The pendant has an "in-off-out" switch similar to the power switch provided on all 120 volt AC StrongArm models. Individually packaged."

:

Sold: Each

"Universal right angle mounting bracket fits most hand winches up to 2000 lbs. capacity. Heavy 1/4" steel with tough powder coated bronze finish."

Description: Universal mounting bracket, Fits: Most winches to 2000 lbs.

Sold: Each

For all D-L ratchet and brake winches. Includes rope/cable clamp, bolt and nut.

Description: Rope cable clamp, Fits: D-L ratchet & brake winches

Sold: Each

The CDI peak reading voltage adapter is specifically designed to work with shielded digital multimeters. This adapter will simplify the testing of electronic ignition systems, stators, sensors and charging systems. The DVA readings will be approximately the same as any other DVA meter and the specifications listed in the service manuals can be followed without problems.

:

Sold: Each