464-520230-1 Drain Tube Brass 1" x 2-7/8"
Seadog Drain Tubes are constructed of formed brass or aluminum. The aluminum drain tubes are recommended for use with aluminum boats only. All tubes have a 1" diameter.
|
|
462-114-02030310 3 Recessed to holes for flush fit to boat's transom or exterior, allowing water to drain when boat is trailered. Plug has screwdriver slot and rubber O-ring to seal water tight. Description: Tube, Plug & O-Ring Sold: Each
|
|
462-34-ARG756 Drain Wingnut w/ O-Ring, 8/01 & Newer Description: Drain Wingnut w/ O-ring , Fits: ARG 8-01 and later Sold: Each
|
|
462-11-61548P "Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel." Size: 2", Type: Voltmeter 12 Volt, Dial Range: 8-18 VDC, Sender Code: N/A Sold: Each
|
|
462-11-61546P "Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel." Size: 3", Type: Tach, Elect, Outboard & 4-Stroke Gas, Dial Range: 0-7000 rpm, Sender Code: O/B Alt or Coil Sold: Each
|
|
462-11-61549P "Black graphics on a light gray dial background. Very low profile bezels follow the curve of the lens to eliminate water "trapping". Pointers are white with a black hub. Graphics light through the dial in blue. Black bezel." Size: 2", Type: Fuel Gauge, Dial Range: E-1/2-F, Sender Code: F Sold: Each
|
|
462-354-5882101 "Injection molded ABS. Folds to a closed depth of 15/16"." Color: Black, Size: 3-3/4" H x 3-7/8" W x 3-7/16" D", Case: 10
|
|
464-588065 Drink Holder SS w/Drain
The Seadog Flush Mount Drink Holder with Drain Fitting is constructed of stainless steel with a rubber insert and will accommodate cans with or without insulated can wraps. The drain fitting uses a 1/4" hose and allows water to be drained to the bilge.
- Size: 3-11/16"/2-7/8"Dia x 3-3/16"D
|
|
462-47-2652 Description: Lower Unit Seal Kit: For #1 Units, Replaces: 26-33144A2 Sold: Each
|
|
500-0840 Drive Shaft End Yoke 1310
- Series: 1310
- Spline Count: 10
- Yoke Style: BS
- Hub Diameter R: 2.125
- C/L To End Hub S: 3.438
- Type: Splined Hole
- Outside Yoke Dimension (In) E: 3.219
- Yoke Bearing Dimension (In) D: 1.062
- Major Diameter: 1.375
- Length Thru Hole Q: 2.000
- Weight 2.03 LB
|
|
462-47-0720 Description: Closed, Replaces: Mercruiser 27-864549A02 Sold: Each
|
|
462-47-0721 Description: Open, Replaces: Mercruiser 27-864547A02 Sold: Each
|
|
462-47-0722 Description: Restricted, Replaces: Mercruiser 27-864850A02 Sold: Each
|
|
464-147008-1 D-Shackle SS 5/16"
The Seadog Stainless Steel D-Shackles have an investment cast 316 stainless steel construction that withstands the marine environment.
- Size: (A) 5/16" (B) 5/8" (C) 1-1/8"
|
|
462-32-1725 For Taylor Made hatches model years 1990 to present. Length: 7'
|
|
462-239-66840085
- Designed for Delta & DTX style anchors
- Friction-free surface to make dropping and weighing anchor easier
- Won't damage the deck or topsides
- Allows you to safely stow anchor while cruising and deploy at short notice
- Constructed of 304 stainless steel
Fits: 22, 35 & 45 lb., Size: 22.7" x 3.03"
Sold: Each
|
|
462-239-0057210 Weight: 22 lbs., Size: 27-3/8" L x 12-7/32" W", Boat Size: 18' - 25'
|
|
462-239-0057216 Weight: 35 lbs., Size: 32" L x 14-1/4" W", Boat Size: 25' - 32'
|
|
462-239-0057220 Weight: 44 lbs., Size: 34-1/2" L x 15-7/16" W", Boat Size: 32' - 42'
|
|
462-239-0057206 An economical alternative to the popular Delta stainless anchor. Constructed out of polished 316 stainless, the DTX has the same dimensions and sizes as the original Delta as well as the same high holding power and fast setting characteristics. The DTX features a 1 year warranty against breakage. Weight: 14 lbs., Size: 23-3/8" L x 10-7/16" W", Boat Size: Up to 18'
|
|
