Generic

The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security.

Fits: Sterndrives: MerCruiser Bravo III (up to 2003), Blackhawk., Thread: 1-14

Sold: Each

• Replaces all Bravo and B-Max shift rings that have left hand threads.
• *Note: This shift ring will not replace early style press on rings. 
• GearMUST have left hand fine threads.
• *This part is not available from Mercury.

Bravo Swivel Shaft Cover Plate Installation Kit

This kit will provide you with all the parts necessary to cut a hole in the back of your gimbal housing and remove the swivel shaft. This kit comes with a pre-drilled buffed stainless steel plate and gasket, all necessary hardware, instructions and cut out template. A recommended optional tool kit, P/N 528-1020 is available for easier dis-assembly and re-installation for the swivel shaft. This kit will only work on Bravo 1, Bravo 2, Bravo 3, and Alpha 1 Gen 2.

Fits: Bravo 1 , Bravo 3, Alpha gen 2.

Slow blow thermal magnetic breaker.

Amps: 70, Fits: Pro Series 1000, Pro-Fish 1000

Amps: 50, Fits: Pro Series 700, Pro Fish 700

Bronze 1-1/8" Rudder Quadrant

• Made from 6061-T6 aluminum.
• Quadrant has a 5” radius
• 1/4” keyway

This heavy duty quadrant has a clamp type boss for simple installation. The bolt locks the quadrant to the shaft. Quadrant has a 5” radius and a 1/4” keyway for added safety.

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding.

Features:
• Surface mounted
• Fast 90° on-off turn
• 400 psi service rating
• RPTFE seats and seals
• Stainless steel lever and nut
• All wetted metallic parts are brass or cast bronze

Size: 1/2" NPT, A: 0.50", B: 1.12", C: 2.25", D: 1.78", E: 3.87"

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding.
Features:
Surface mounted
Fast 90° on-off turn
400 psi service rating
RPTFE seats and seals
Stainless steel lever and nut
All wetted metallic parts are brass or cast bronze
NOT TO BE USED IN POTABLE WATER SYSTEMS.
Size: 1/4" NPT", A: 0.43", B: 1.12", C: 2.25", D: 1.78", E: 3.87"

Quality bronze valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding.
Features:
Surface mounted
Fast 90° on-off turn
400 psi service rating
RPTFE seats and seals
Stainless steel lever and nut
All wetted metallic parts are brass or cast bronze
NOT TO BE USED IN POTABLE WATER SYSTEMS.
Size: 3/8" NPT, A: 0.50", B: 1.12", C: 2.25", D: 1.78", E: 3.87"

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 2" x 1"

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 2" x 3/4"

Die cast Manganese Bronze construction
Finish: Bronze

• Die cast Manganese Bronze construction


• Finish: Bronze

Size: 0, A: 2-1/8", B: 1/4", C: 7/16", Case: 10

Sold: Each

"Specifications: Body: Bronze; Impeller: Neoprene; Wearplate: Not Fitted; Shaft: Stainless steel; Shaft Seal: Carbon/ceramic mechanical type; Bearings: Twin single row, ball type; Port Type: 1" (25mm) ID Hose; Weight: 5 lb 2.3 kg"

• Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500 rpm


• Self-priming from dry up to 2.4m (7.8ft)


• Made from marine quality bronze and stainless steel


• Flange Mount


• Supplied with 3/16" key only and high pressure Neoprene impeller


• Carbon/ceramic mechanical type shaft seal; Port Type: 1" (25mm) ID Hose

Fits: Commander Marine 302, 351 CIGlastron 302, 351 CI Class 165, 190, 200 & 225

Sold: Each

"Has a flange diameter of 2". Pipe size is 1/2". Fastener is #8 FH. Bronze."

Description: Flange w/Plug, Size: 2" dia ", Thread: 1/2" NPT"

Sold: Each

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 2" x 1-1/4"

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 3/4" x 3/8"

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 3/8" x 1/8"

Bronze and 90°. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1" x 3/4"

Sold: Each

Bronze and 90°. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1/2" x 3/8"

Sold: Each

Bronze and 90°. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1-1/4" x 1"

Sold: Each

Bronze and 90°. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 3/4" x 1/2"

Sold: Each