The Blower Shop

10-71 Race Blower Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. Today, nothing has changed. We have customers all over the world earning titles and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every Race Blower we build has countless hours of Research and Development behind its design, which equates to Proven Performance for The Blower Shop's customers, every time. If winning races is what you’re interested in, The Blower Shop™ has your answer. Designed for Track use ONLY Ready for Race ONLY Marine applications Excellent for Race applications up to 572 CID Great for Top Dragster and Bracket Racing Classes

• Weight: 90 lbs
• Dimensions: 29×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 1071
• XR / Race: Race

10-71 Race Front Discharge Blower Since 1984 The Blower Shop™ has been manufacturing the best Race Blowers on the market. Today, nothing has changed. We have customers all over the world earning titles and championships using The Blower Shop's superchargers, all while providing us with unbiased feedback and data. Every 10-71 Race Front Discharge Blower we build has countless hours of Research and Development behind its design, which equates to Proven Performance for The Blower Shop's customers, every time. If winning races is what you’re interested in, The Blower Shop™ has your answer. Designed for Track use ONLY Ready for Race ONLY Marine applications Excellent for Race applications up to 572 CID Great for Top Dragster and Bracket Racing Classes 2 ¼” Set Back Plate Required (“Retro”) Ideal for Higher RPM Engines

• Weight: 90 lbs
• Dimensions: 29×13×9 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 1071
• XR / Race: Race

• Weight: 90 lbs
• Dimensions: 29×13×9 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI
• Supercharger Model/Size: 1071

• Weight: 90 lbs
• Dimensions: 29×13×9 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI
• Supercharger Model/Size: 1071

11.375″ OAL TBS BELT GUARD (FITS 8.90″ TO 9.90″ SNOUT) [#8611] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

11” TOP INSERT FOR XR-1 RACE SUPERCHARGERS (#2101) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases.

• Weight: 2 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

12.25” TOP INSERT FOR STANDARD RACE CASE (#2121) The Blower Shop's billet race inserts allow you to tailor blower boost to specifically fit your application. Changing the supercharger inlet opening of the blower allows you to better match boost to the fuel curve or track conditions. The larger opening will result in higher boost at higher engine RPMs. meanwhile the smaller openings will result in increased boost at lower RPMs, but will start to restrict airflow at the top end of the track.

• Weight: 2 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series
• XR / Race: Race

12.25” TOP INSERT FOR XR-1 RACE BLOWER (#2100) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases.

• Weight: 2 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. This belt is 2″ wide and works with TBS 8mm pulleys found on The Blower Shop's 192/250 blowers. 1280 8MM 50 (2″ WIDE) BELT (50.4″)

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

12 point steel flanged blower nuts. Eight each come in an order.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

1-3/4" Idler Pulley Stand

• Billet aluminum

• Better selection - 4" and 6" idler pulleys available

• Standard blower mount bracket • Competition block mount bracket
• Swing arm bracket

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. This belt is 2″ wide and works with TBS 8mm pulleys found on The Blower Shop's 192/250 blowers. 1360 8MM 50 (2″ WIDE) BELT 53.5″.

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The Blower Shop™ has most gaskets for your supercharger. This base gasket is for the 142/144 superchargers. Bolt pattern is 9.750″ by 5.50″ and blower opening is 7.750″ by 2.625″. Gasket is .032″ thick.

• Weight: 0.1 lbs
• Dimensions: 12×8×.1 in

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. TBS recommends that the 8mm belt system should be used in most cases other than The Blower Shop's 192 and 250 Blower options. Tooth Count 1440- 180 teeth

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

1440-8m-75 HTD (56 7" x 2 95") 180 Tooth

The belts are listed by their proper metric identification (length / pitch / width, expressed in millimeters), followed by the US conversion of length and width, and finally, the tooth count of the belt The full scale profile schematics shown for each style belt can further help you in identifying which belt you might be presently using, plus inform you of the materials used in it's construction Gates Rubber Company, the manufacturer of these belts, recommends you do not interchange the HTD and GT belt and pulley profiles

14-71 Big Block Kit Polished 3V Marine

All TBS Supercharger Kits Include:

• Supercharger with Billet Bearing Plates and Billet Front cover

• Blower Manifold

• Aluminum Blower Studs

• Billet Snout with Heat-Treated 4340 Main Shaft and Coupler 1-1/4" - 48 Spline

• Billet 8mm Pulleys

• mm-75 Blower Belt

• Accessory Pulley

• Billet Idler Pulley and Bracket

• Billet Carburetor Adapter for Dual 4150 or Dual 4500 or Single 4500

• All Related Gaskets