The Blower Shop

O-ring material designed to work with all of The Blower Shop's fitted applications, this is a 1/8″ o-ring and is sold per foot.

• Weight: 0.1 lbs
• Dimensions: 4×4×.125 in

1/8″ Manual pressure relief valve for Superchargers.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• Finish: Black, Polished

1/8″ Manual pressure relief valve for Superchargers.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• Finish: Black, Polished

10 RIB BELT 1305MM (51.38") FOR 192/250 BLOWER

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts: 1195MM (47.0")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

10 RIB BELT 1195MM-1360MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts: 1195MM (47.0"), 1225MM (48.2"), 1320MM (52.0"), 1335MM (52.55"), 1360MM (53.54")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts: 1320MM (52.0")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts:1335MM (52.55")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts:1360MM (53.54")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

16 RIB IDLER PULLEY STAND

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series
• Belt Style: 10 RIB Drive

10.375″ OAL TBS BELT GUARD (FITS 7.90″ TO 8.90″ SNOUT) [#8610] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

10.50” TOP INSERT FOR STANDARD RACE CASE SUPERCHARGERS (#2122) The Blower Shop's billet race inserts allow you to tailor blower boost to specifically fit your application. Changing the supercharger inlet opening of the blower allows you to better match boost to the fuel curve or track conditions. The larger opening will result in higher boost at higher engine RPMs. meanwhile the smaller openings will result in increased boost at head of the throttle, but will start to restrict airflow at the top end of the track.

• Weight: 2 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series
• XR / Race: Race

• Weight: 4 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

10” INSERT FOR XR-1 RACE SUPERCHARGER (#2102) TBS XR Race Inserts are machined from 6061 billet aluminum in several sizes to accommodate specifically to your application giving you the ability to tune boost to track conditions and engine configuration. These Race Inserts provide more velocity to the fuel/air charge and allow you to match the fuel curve to boost curve, allowing the two to become linear to each other. You can tune when the boost is delivered, whether that’s immediately off the line or gradually as the engine speed increases. Below is a youtube video describing the usages and available sizes.

• Weight: 3 lbs
• Dimensions: 16×9×3 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

10-71 Big Block Kit Polished 3V Marine

All TBS Supercharger Kits Include:

• Supercharger with Billet Bearing Plates and Billet Front cover

• Blower Manifold

• Aluminum Blower Studs

• Billet Snout with Heat-Treated 4340 Main Shaft and Coupler 1-1/4" - 48 Spline

• Billet 8mm Pulleys

• mm-75 Blower Belt

• Accessory Pulley

• Billet Idler Pulley and Bracket

• Billet Carburetor Adapter for Dual 4150 or Dual 4500 or Single 4500

• All Related Gaskets

10-71 Big Block Kit Polished 3V Marine Front Offset

All TBS Supercharger Kits Include:

• Supercharger with Billet Bearing Plates and Billet Front cover

• Blower Manifold

• Aluminum Blower Studs

• Billet Snout with Heat-Treated 4340 Main Shaft and Coupler 1-1/4" - 48 Spline

• Billet 8mm Pulleys

• mm-75 Blower Belt

• Accessory Pulley

• Billet Idler Pulley and Bracket

• Billet Carburetor Adapter for Dual 4150 or Dual 4500 or Single 4500

• All Related Gaskets

10-71 Big Block Tall Kit Polished 3V Marine

All TBS Supercharger Kits Include:

• Supercharger with Billet Bearing Plates and Billet Front cover

• Blower Manifold

• Aluminum Blower Studs

• Billet Snout with Heat-Treated 4340 Main Shaft and Coupler 1-1/4" - 48 Spline

• Billet 8mm Pulleys

• mm-75 Blower Belt

• Accessory Pulley

• Billet Idler Pulley and Bracket

• Billet Carburetor Adapter for Dual 4150 or Dual 4500 or Single 4500

• All Related Gaskets

10-71 Big Block Tall Kit Polished 3V Marine Front Offset

All TBS Supercharger Kits Include:

• Supercharger with Billet Bearing Plates and Billet Front cover

• Blower Manifold

• Aluminum Blower Studs

• Billet Snout with Heat-Treated 4340 Main Shaft and Coupler 1-1/4" - 48 Spline

• Billet 8mm Pulleys

• mm-75 Blower Belt

• Accessory Pulley

• Billet Idler Pulley and Bracket

• Billet Carburetor Adapter for Dual 4150 or Dual 4500 or Single 4500

• All Related Gaskets

• Weight: 34 lbs
• Dimensions: 26×13×7 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 1071

• Weight: 34 lbs
• Dimensions: 26×13×7 in
• 71 / Low Profile: 71 Series
• Supercharger Model/Size: 1071