Accessories - O2 Sensors

Seaward O2 Oxygen Sensor Adapter Flange
Your Price:
$99.99

Seaward O2 Oxygen Sensor Adapter Flange

620-38080

Whether you're a tuner seeking to add a popular Air/Fuel ratio gauge or you're entering the world of aftermarket fuel injection we have developed the critical part to make this addition a snap. This billet aluminum anodized wedge is at just the perfect angle to allow re-connection of your original exhaust hose. The kit includes (1) O2 adapter wedge, (2) gaskets, and (2) new front attachment studs. Bolt pattern is 3" x 4.5".


Seaward O2 Wedge / Gauge Kit

Your Price:
$409.99

Seaward O2 Wedge / Gauge Kit

620-38081 + Option(s)

Seaward O2 Wedge / Gauge Kit

  • Gauge kit includes custom tuned .1 AFR Resolution Bosch LSU 4.9 Sensor, 8ft. wiring harness, 304 stainless steel weld-in bung, mounting hardware, and detailed instructions for installation
  • 0-5v data and serial data outputs for ECU, data acquisition unit, or Laptop tuning
  • User programmable range for Rich/Stoic/Lean conditions
  • Peak recall/memory
  • 10:1 to 20:1 AFR range for gasoline applications
  • 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
  • User Programmable Warning Function
  • Display data in Lambda or numerical A/F ratio

Whether you're a tuner seeking to add a popular Air/Fuel ratio gauge or you're entering the world of aftermarket fuel injection we have developed the critical part to make this addition a snap. This billet aluminum anodized wedge is at just the perfect angle to allow re-connection of your original exhaust hose. The kit includes (1) O2 adapter wedge, (1) gasket, and (2) new front attachment studs.


Max Volt Catalyst Eliminator Computer
Starting From:
$459.99

This Part has options, please click the button below to order.

Max Volt Catalyst Eliminator Computer

121-120 + Option(s)

Max Volt Catalyst Eliminator Computer

If increased engine performance is what you are after but have concerns about the catalyst equipment on your engine, then the Catalytic Eliminator Computer (CEC) is what you need! Designed specifically for marine engines, Maxvolt Performance worked with a team of marine electrical engineers to create a product this simple and gets the job done. There is no cutting or splicing of wires; everything is plug and play! And there are three ways to play! Your engine can be Aggressive,Mild, or Basic:

Aggressive: If you want to be aggressive and replace your stock exhaust system with a header system, then this is the product for you. We worked with the header design teams at Hardin Marine and other popular manufacturers to be sure their headers are manufactured to work with CEC. To be compatible, the header must be made to accept a pre-oxygen sensor!

Mild:If changing over to headers is too aggressive for you, then removing the catalysts but retaining the stock exhaust manifolds is the path for you. Depending on the engine, 10 to 15 horsepower will be gained by removing the catalysts and using the factory exhaust system.

Basic:If your boat has fouled its post oxygen sensors and is no longer under the factory warranty, then you know what it costs to have new sensors installed and the trouble codes cleared. For less than what your dealer charged, you can purchase and install the CEC and never have to worry about throwing that fault code again!

Note:
  • Only works with the 4 pin plug switching style O2 sensors.
  • Will not work on the newer wide band O2 sensors with 6 pin plugs.

WARNING! This module is not to be used on emissions regulated waterways. The intent of this module is to allow the running of a catalyzed marine engine without the catalytic converters installed and without triggering any ECU error codes. With the engine operating in this condition, the emissions control system will be rendered inoperative. For this reason, do not operate the vessel on emissions regulated waterways. This computer system is not legal for any purpose other than testing purposes and not for use on any state or federal waterway.

O2 Spacer, Stock Mercury Riser
Your Price:
$84.99

O2 Spacer, Stock Mercury Riser

620-32430

O2 Spacer, Stock Mercury Riser

This Unique 1" thick adapter plate provides an installation option for retro fitting a Oxygen sensor and or air fuel ratio gauge for tuning purposes Into Mercruisers most common Wet Joint style exhaust manifold systems. The part is CNC machined from 6061 Billet Aluminum then Naval Spec Hard Coat anodized for corrosion resistance (Beware of inferior non-coated versions)

A unique feature of this adapter is the cooling parts that run along each side of the sensor maintaining consistent temperature of the spacer. Designed to accept all popular 18MM O2 Oxygen sensors.

  • Mercury 3 and 4" Riser Gasket(700-32080) 2 Required
  • Stainless Steel 18MM Oxygen Sensor Plug(620-50031) 1 Required

 


Stainless Steel Oxygen Sensor Bung
Your Price:
$33.95

Stainless Steel Oxygen Sensor Bung

620-50030

Stainless Steel Oxygen Sensor Bung

These bungs are designed to allow you to weld in a oxygen sensor bung forconvenient fuel injection or air fuel ratio calibration. Price does not include installation/welding.  Sold Each. 18mm x 1.5

Note: This is a bung and plug only, no installation is done.


Stainless Steel Oxygen Sensor O2 Bung
Your Price:
$125.00

Stainless Steel Oxygen Sensor O2 Bung Installed

620-50020

Stainless Steel Oxygen Sensor O2 Bung Fitted to Tailpipe (Each)

These bungs are designed to allow you to weld in an oxygen sensor bung for convenient fuel injection or air fuel ratio calibration.

Universal M18x1.5 thread pitch. Fits most wideband & narrow band O2 sensors. Requires welding.

Note: This part will be fitted to Hardin Marine tailpipes. These must be ordered with Hardin Marine tailpipes.