462-1-HA1201 Power Assist Dual Ignition Control Kit Description: Dual Ignition Control Kit Sold: Each
|
|
462-1-HA54452 The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.
Features:
- Speed, quality, and ease-of-operation
- Extended portablility for use in the field
- Convenient electrical hook-up utilizing an avail able12-volt boat battery
The quickest way to bleed a SeaStar ® or BayStar ® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat by using Power Purge this can be reduced to 10 minutes or less. Features:- Speed, quality, and ease-of-operation
- Extended portability for use in the field
- Convenient electrical hook-up utilizing an available12V boat battery
: Sold: Each
|
|
462-1-HO5712 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 12', Box: 2 Sold: Box
|
|
462-1-HO5714 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 14', Box: 2 Sold: Box
|
|
462-1-HO5716 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 16', Box: 2 Sold: Box
|
|
462-1-HO5718 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 18', Box: 2 Sold: Box
|
|
462-1-HO5720 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 20', Box: 2 Sold: Box
|
|
462-1-HO5722 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 22', Box: 2 Sold: Box
|
|
462-1-HO5724 Includes 2 hoses. For hose length, measure intended hose routing or existing cable path and add 2' to allow for engine tilt and steering cylinder movement. Can be used with SeaStar or SeaStar Pro steering systems. Length: 24', Box: 2 Sold: Box
|
|
462-1-HA6523 Kit is designed to replace the tilting mechanism of a SeaStar Traditional and SeaStar Classic Tilt helms. Description: Classic Tilt replacement kit Sold: Each
|
|
462-1-HH52613 "Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for positive rudder lock, patented bleed tubes and internal air pocket to eliminate oil expansion overflow. Compact and stylish. Fits 3" dash hole for round look with retro fit of 4-1/2" dash hole for standard Seastar square look." " Improved Seastar Helms (Item Numbers ending in "3") are equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. " Type: SeaStar 1.7, Mount: Rear Sold: Each
|
|
462-1-HC53283 This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. Model: 125-8EM Unbalanced Sold: Each
|
|
462-1-HC53123 These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings. Type: BA125-7ATM, Body Dia.: 1.375", Shaft: .50" Sold: Each
|
|
462-1-HC53133 These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings. Type: BA135-7ATM, Body Dia.: 1.5", Shaft: .625" Sold: Each
|
|
462-1-HC53143 These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings. Type: BA150-7ATM, Body Dia.: 1.75", Shaft: .625" Sold: Each
|
|
462-1-HC53263 This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. Model: BA150-7EM Balanced Sold: Each
|
|
462-1-HC5332 This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. Model: Unbalanced Sold: Each
|
|
462-1-HA5438 Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly. : Sold: Each
|
|
462-1-HC53753 Type: Front Mt., Description: Catamaran Cylinder Sold: Each
|
|
462-1-HC53473 Type: Front Mt., Description: Honda 115-130 hp Sold: Each
|
|
