137-8082 -4 AN Male Port to 3/16" Inverted Flare Adapter
|
|
This Part has options, please click the button below to order.
137-79 + Option(s) Hydraulic Stainless Steel Trim Hose Assemblies with 90 / 90 Degree Ends
These are 100% 316 stainless steel hose assemblies for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable!
|
|
137-8078 ORB -5 Male Port to -3 Female JIC Adapter, with screen. Sold Each.
|
|
137-8075 ORB -5 Male Port to -4 Male JIC Adapter
|
|
137-8250 Replacement fitting for use with Hardin Trim Pumps
|
|
137-8299 Inverted Flare Adapter Fitting
-4 Male O-ring to -4 inverted flare. Use for Mercury stern drive trim hoses. Stainless Steel.
|
|
137-8274 Stainless straight fitting -4 male IF x -4 an male 37 deg flare
|
|
137-8069 -40RB To -4 JIC Oring Make to Flare Adapter
|
|
137-8403 Outdrive Trim Hoses - Short Radius (Priced per Inch)
This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line with a clear rubber protector for easy cleaning and longevity of the hose.
- Replaces Mercruiser # 32-861127
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Stainless End to Connector Block: 7/16-24 IF
- Stainless End to Trim Pump: 3/8-24 IF
- Sold per Inch
- Custom Made per Order - MINIMUM SIZE is 60"
- NO RETURNS
|
|
137-8401 Outdrive Trim Hoses - Long (Priced per Inch)
This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line for longevity of the hose.
- Replaces Mercruiser # 32-861127 and 32-861128
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Stainless End to Connector Block: 7/16-24 IF
- Stainless End to Trim Pump: 3/8-24 IF
- Sold per Inch
- Custom Made per Order - MINIMUM SIZE is 60"
- NO RETURNS
|
|
137-8402 Outdrive Trim Hoses - Long/Short Pair (Priced per Inch)
This is a longer replacement trim pump connector hose kit for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless braided line with a clear rubber protector for easy cleaning and longevity of the hose.
- Replaces Mercruiser # 32-861127 and 32-861128
- Will fit R/MR/Alpha I/II and BravoI/II/III
- Trim pump to connector block
- Sold per Inch
- Custom Made per Order - MINIMUM SIZE is 60"
- NO RETURNS
- If you need more than one pair of custom hoses, please give us a call to order them so we can make sure everything is built correctly.
|
|
137-8267 60 inch trim hose with one 90 degree and one straight hose end. Fitting size is -3 inverted flare 3/8"-24 thread.
|
|
This Part has options, please click the button below to order.
137-83 + Option(s) Hydraulic Stainless Steel Trim Hose Assemblies with Straight / 90 Degree Ends
These are 100% 316 stainless steel hose assemblies for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable.
|
|
This Part has options, please click the button below to order.
137-8 + Option(s) Hydraulic Stainless Steel Trim Hose Assemblies with Straight / Straight Degree Ends
These are 100% 316 stainless steel hose assemblies for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each.
|
|