Steering and Controls - Seastar Solutions Hydraulic Fittings and Parts

Hydraulic Cylinder Seal Kit
Your Price:
$69.99

Hydraulic Cylinder Seal Kit

462-1-HS5183

Hydraulic Cylinder Seal Kit

:

Sold: Each


I/O & Inboard Fitting Kit
Your Price:
$86.99

I/O & Inboard Fitting Kit

462-1-HF5502

These fitting kits enable installation of a 2nd station helm or an autopilot pump into an existing SeaStar steering system. Some additional parts which are supplied with the helm pump will be re-used.

Application: Inboard/Sterndrive Kit

Sold: Each


Non-Vented Fill Plug
Your Price:
$15.99

Non-Vented Fill Plug

462-1-HA5432

Non-Vented Fill Plug

Description: Non-Vented Fill Plug

Sold: Each


Port Engine to Cylinder Tie Bar
Your Price:
$586.99

Port Engine to Cylinder Tie Bar

462-1-HO6003

Port Engine to Cylinder Tie Bar

Description: Port engine to drive cylinder tie bar kit (see SeaStar Application Guide for proper tie bar selection)

Sold: Each


Power Purge Jr
Your Price:
$1,373.99

Power Purge Jr

462-1-HA54452

The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.
Features:

  • Speed, quality, and ease-of-operation

  • Extended portablility for use in the field

  • Convenient electrical hook-up utilizing an avail able12-volt boat battery

The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat by using Power Purge this can be reduced to 10 minutes or less.

Features:
  • Speed, quality, and ease-of-operation

  • Extended portability for use in the field

  • Convenient electrical hook-up utilizing an available12V boat battery

:

Sold: Each


Seal Kit
Your Price:
$58.99

Seal Kit

462-1-HS5161

Seal Kit

Description: Seal Kit for all Capilano Helm Pumps

Sold: Each


Seal Kit
Your Price:
$54.99

Seal Kit

462-1-HS5151

For the SeaStar helm pump. Units prior to 1984, there is no seal kit.

:

Sold: Each


SeaStar helm Vented Fill Plugs, 5/Pack
Your Price:
$47.99

SeaStar helm Vented Fill Plugs, 5/Pack

462-1-HP6126

SeaStar helm Vented Fill Plugs, 5/Pack

Description: Helm Vented Fill Plug (5PK)

Sold: Pack


SEASTAR HYDRAULIC FITTINGS (SEASTAR)
Your Price:
$74.99

SEASTAR HYDRAULIC FITTINGS (SEASTAR)

462-1-HF6002

Type: Bleeder/Tee, Vertical, Material: Aluminum, Bag: 2

Sold: Pack


SEASTAR HYDRAULIC FITTINGS (SEASTAR)
Your Price:
$75.99

SEASTAR HYDRAULIC FITTINGS (SEASTAR)

462-1-HF6003

Type: Bleeder/Tee, Hynautic, Material: Aluminum, Bag: 2

Sold: Pack


SEASTAR HYDRAULIC FITTINGS (SEASTAR)
Your Price:
$45.99

SEASTAR HYDRAULIC FITTINGS (SEASTAR)

462-1-HF6004

Type: 90° Elbow, Material: Aluminum, Bag: 2

Sold: Pack


Seastar Liquid Tie Bar Alignment Valve
Your Price:
$450.99

Seastar Liquid Tie Bar Alignment Valve

462-1-HA54712

The SeaStar cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar as opposed to a solid link or a mechanical tie bar. Hydraulic tie bar SeaStar alignment valve may be used in conjunction with a cylinder mounted to each engine.

:

Sold: Each


SS 45° Elbow ORB Fitting
Your Price:
$38.99

SS 45° Elbow ORB Fitting

462-1-HF6011

"These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings."

Description: 45 Degree Elbow, Fits: -3 SeaStar and BayStar helm pumps, Bag: 2

Sold: Pack


SS ORB Fitting Kit
Your Price:
$201.99

SS ORB Fitting Kit

462-1-HF6007

"These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings."

Description: Fitting Kit, Fits: "-3 SeaStar helms when adding a station/autopilot using SeaStar Steering "hose."

Sold: Each


SS ORB Fitting Kit
Your Price:
$94.99

SS ORB Fitting Kit

462-1-HF6010

"These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings."

Description: Fitting Kit, Fits: "-3 SeaStar helms when adding a station/autopilot using SeaStar Steering "tube."

Sold: Each


SS Straight ORB Fitting
Your Price:
$23.99

SS Straight ORB Fitting

462-1-HF6009

"These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings."

Description: Straight ORB fitting, Fits: -3 SeaStar and BayStar helm pumps, Bag: 2

Sold: Pack


SS Vertical Tee ORB Fitting
Your Price:
$68.99

SS Vertical Tee ORB Fitting

462-1-HF6006

"These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings."

Description: Vertical Tee , Fits: -3 SeaStar steering cylinders, Bag: 2

Sold: Pack


STAINLESS STEEL ORB FITTINGS (SEASTAR)
Your Price:
$47.99

STAINLESS STEEL ORB FITTINGS (SEASTAR)

462-1-HF6012

Description: -5 ORB (M), 1/4 NPT(F) kit, Fits: -3 SeaStar helms, Bag: 3

Sold: Pack


Tee Fitting 1/4 X 3/8 (3/Bg)
Your Price:
$46.99

Tee Fitting 1/4 X 3/8 (3/Bg)

462-1-HF5536

"All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread."

Type: Tee Fitting, Material: Aluminum, Bag: 3

Sold: Bag


Tee Fitting 3/Bg
Your Price:
$54.99

Tee Fitting 3/Bg

462-1-HF5533

"All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread."

Type: Tee Fitting, Material: Brass, Bag: 3

Sold: Bag