UFlex

Kit to connect C5, C16, MACH5 and Mercury® (except Gen II ™) cables to B301 and B302 control boxes.

Kit to connect C22 and 4300 series cables to B301 and B302 control boxes.

Kit to connect C36, MACH36 and Mercury® Gen II™ cables to B301 and B302 control boxes.

K66 Steering Cable Adapter
Adapts M66 cable to threaded helms.

Adapts M66 cable to threaded helms.

Kit to connect C2, C8 and MACHZero cables to B322 and B324 controls.

Uflex Dual Cable Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. Click here for how to measure for replacement cable.

This kit includes:

• T72FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 -  2 steering cables

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Control Unit for UFLEX trim tabs. Includes wire harness. 2.76” Cutout

Evinrude, Johnson, Pre 1979 OMC Control Cable. Brass Hardware. 3.1” (80mm) Stroke. 0.27” (7mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories.

• Standard 3/4’’ taper
• 13.8" diameter wheel
• Hub included
• All ULTRAFLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats.
• All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards.

Need help installing your new steering wheel? Check out this handy tutorial!

Hyco Front Mount Outboard System for 150hp and Less. Includes: UC94-OBF cylinder (Not suitable for HONDA®BF115 and BF130 engines and Mercury® Optimax TM75, 90, 115.) Available with Standard or Tilt Helm.

Featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the UP20 helm the Hyco offers effortless steering with 5 turns lock to lock. And it is applicable to almost all 2 and 4 stoke outboards engines.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil.
Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additional Info Tab to make sure you order the correct cylinder.

Mach Series Evinrude, Johnson, Post 1979 OMC Control Cable. Stainless Steel Hardware. 3” (75mm) Stroke. 0.31” (8mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories. Blue Mach Series Jacket ideal for high performance applications, long cable runs, and complex routings.

Mach Series Mercury and Mercruiser Control Cable. Stainless Steel Hardware. 3.75” (95mm) Stroke. 0.31” (8mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories.

Mach Series Mercury and Mercruiser Generation II. Stainless Steel Hardware. 3.4” (85mm) Stroke. 0.31” (8mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories. Blue Mach Series Jacket ideal for high performance applications, long cable runs, and complex routings.

Mercury and Mercruiser Control Cable. Brass Hardware. 3.75” (95mm) Stroke. 0.27” (7mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories.

Neutral safety switch to prevent in-gear starting.

Neutral safety switch to prevent in-gear starting, suitable for B400 and B401-ETC controls.

Neutral safety switch to prevent in-gear starting, suitable for B103 and B104 controls.