462-177-V856 - Combination LED stop, turn and tail light
- Super bright LED optics - no bulbs to break or burn out
- 100,000-hour-rated life
- Fully sealed, submersible construction
- Potted circuitry protects against moisture, corrosion and vibration
- Lower amp draw than incandescent lights
- Designed to directly replace 456-series incandescent lights
- Integral, dedicated side marker diode
- Exceeds all DOT rear lighting and rear lighting and reflex requirements for trailers 80" wide and over
Description: w/o License Light , Case: 6 - Combination stop, turn and tail light
- Super bright LED optics-no bulbs to break or burn out
- 100,000-hour-rated life
- Fully sealed, submersible construction
- Potted circuitry protects against moisture, corrosion and vibration
- Lower amp draw than incandescent
- Designed to directly replace 456-series incandescent lights
- Integral, dedicated side marker diode
- Exceeds all DOT rear lighting and rear lighting and reflex requirements for trailers 80" wide and over
|
|
462-177-V947 - Submersible rear lighting kit for all trailers 80" wide and over
- Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructions
- Replacement harness available separately
- Provides rear lighting and reflectors, front clearance/side marker lights, front side reflectors and rear identification lights (necessary to meet all DOT requirements)
Description: LED Trailer Light Kit - Submersible rear lighting kit for all trailers 80" wide and over
- Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructions
- Replacement harness available separately
- Provides rear lighting and reflectors, front clearance/side marker lights, front side reflectors and rear identification lights (necessary to meet all DOT requirements)
|
|
462-177-V840 Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,000 hour-rated life. The lights are fully sealed and submersible. Includes an integral, dedicated side marker diode. 4-3/4" overall height x 4-7/8" W x 3" D. With-out license light version has 11-diodes; with license light version has 15-diodes. Description: Right Side w/o License Light
|
|
462-177-V840L Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,000 hour-rated life. The lights are fully sealed and submersible. Includes an integral, dedicated side marker diode. 4-3/4" overall height x 4-7/8" W x 3" D. With-out license light version has 11-diodes; with license light version has 15-diodes. Description: Left Side w/License Light
|
|
462-177-V941 Super bright LED optics. 100,000 hour rated life. Submersible - no bulb breakage. Low amp draw. Kit contains: two multi-function LED stop, turn and tail lights, license bracket, mounting and wiring hardware, and complete mounting instructions. Rear legal lighting equipment for any trailer less than 80" (2M) wide. Meets DOT requirements. Roadside light contains auxiliary license light. Description: LED Trailer Light Kit
|
|
462-177-V171C " - Bright Piranha® 1-diode LED
- Black rubber grommet included
- Grommet fits 3/4" hole
- Hard wired design prevents lamp-plug failures and cannot corrode
- Meets Federal requirements for clearance, side marker and ID lights
- 8-16 volt operating range
"" - Bright Piranha® 1-diode LED
- Black rubber grommet included
- Grommet fits 3/4" hole
- Hard wired design prevents lamp-plug failures and cannot corrode
- Meets Federal requirements for clearance, side marker and ID lights
- 8-16 volt operating range
" Lens: Clear Sold: Each
|
|
462-177-E421KR May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug. Description: Red, complete kit Sold: Pack
|
|
462-177-E421R May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug. Description: Red, oval tail light, VIZ pack Sold: Each
|
|
462-177-E456 Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement while maintaining gasket seal. Grounds through separate lead wire. Mounts on slide-on 2" centers and includes mounting hardware. Description: Curbside/ Without License Light
|
|
462-177-E456L Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement while maintaining gasket seal. Grounds through separate lead wire. Mounts on slide-on 2" centers and includes mounting hardware. Description: Roadside/ With License Light
|
|
462-177-V547 For all trailers over 80" wide. Kit provides all rear legal lighting and reflectors for trailers over 80" wide. Includes one each low profile 456/456L tail light, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware and installation instructions.
|
|
462-177-E452 Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mounts on 2" centers and includes mounting hardware. 5-3/4" x 4-1/2" x 2-7/8". Description: Right Side: Without License Light
|
|
462-177-E452L Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mounts on 2" centers and includes mounting hardware. 5-3/4" x 4-1/2" x 2-7/8". Description: Left Side: With License Light
|
|
462-177-V544 Kit includes one each 452/452L tail light, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions. Pack: Vis pack
|
|
462-177-E150BKR Functions as a side marker or clearance light; may be used as a combination light when mounted properly. Lens is welded to housing. Features a 15,000 long-life bulb.
Kit includes 150 light, chassis mounting bracket, lead wire and mounting screws. Lens: Red w/Black Base Sold: Each
|
|
462-177-11415A Description: Amber replacement lens Sold: Each
|
|
462-177-14318K Description: 2?" Flush Mount Grommet Kit"
|
|
462-177-14618K Description: 2" Flush Mount Grommet Kit"
|
|
462-177-E5401 Harness extensions available in both 4-way and 5-way flat configurations. Each configuration has trailer connector on one end and trunk connector on other. Perfect for those times when an extension is needed between the tow vehicle and trailer. Connector: 4-Way Harness Extension, Lead: 30", Case: 6
|
|
462-177-E440 Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8". Description: Right Side: Without License Light
|
|
