Generic

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Adapter 1/2" Female"

Sold: Each

Description: Adapter 1/2" NPT 15mm Male

Description: Adapter 3/8" BSP Female Brass

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Adapter 3/4" Female"

Sold: Each

Description: Adapter (Sm. Wings) 1/2" Female-15mm

Quick, easy and clean way to change marine lower unit gear lube. For use with all 8 fl. oz. and 10 fl. oz. squeeze tubes (28600). Flexible hose gets to hard-to-reach fill plugs. Metal threaded fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units (check owner's manual to confirm exact size needed). Use adapter for other engines.

Description: Adapter for Suzuki, Case: 12

Sold: Each

Quick, easy and clean way to change marine lower unit gear lube. For use with all 8 fl. oz. and 10 fl. oz. squeeze tubes (28600). Flexible hose gets to hard-to-reach fill plugs. Metal threaded fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units (check owner's manual to confirm exact size needed). Use adapter for other engines.

Description: Adapter for Yamaha, Nissan, Tohatsu & Honda (2-50hp), Case: 12

Sold: Each

Add-A-Battery, Dual Circuit Sys

The Blue Sea Systems Add-A-Battery Dual Circuit System automates charging and simplifies switching for a complete two battery bank solution.

Kit Includes:
• Dual Circuit Plus(TM) Battery Switch
• Simplifies battery switching
• Isolates engine and house circuits
• Combines battery banks for emergency starting
• 120 AMP SI Automatic Charging Relay
• Automatically combines battery banks during charging
• Isolates battery banks when discharging and when starting engines

• Machined From Solid Billit Aluminum
• Adjusts in 1" increments
• 10,000 lbs Tow Rating, Ball Limited
• 1,500 lbs Max Tounge Weight
• Contains Keyed Alike 5/8 Receiver Lock, T3 and Dual Hitch ball (2" & 2-5/15")

• Machined From Solid Billit Aluminum
• Drop/Rise Adjusts in 1" increments
• With Ball Mount Pin & Clip Design
• Includes Dual Hitch ball (2" & 2-5/15")
• 10,000 lbs Tow Rating, Ball Limited
• 1,500 lbs Max Tounge Weight

316 Stainless Steel. Fastener: #10FH. Packed one per card.

A: 1-11/16", B: 1", C: 1-15/16", D: 2-3/4"

Sold: Each

"All stainless steel construction with dual swiveling mounts allows for full adjustability. Will accept any standard antenna with 1" - #14 threads. Designed with an integral feed system for Loran cable. 1/4" RH fastener."

A: 4-1/2", B: 2-1/2", C: 3-5/8", D: 1-13/16", E: 2-15/16", Case: 5

Sold: Each

"Die Cast Zinc Chrome Plated Die cast zinc construction with a mirror finish chrome plating will accept any standard antenna with 1" - #14 threads. Designed with an integral feed system for Loran cable. Standard case: 5."

A: 4-3/4", B: 2-1/8", C: 3-5/8", D: 1-7/16", E: 2-15/16", Fastener: 1/4"

Sold: Each

"Chrome plated zinc. Hardened steel pins. Will fit sizes up to 8" diameter."

Length: 8-1/2"

Sold: Each

"

• Pro swivel 360° rotating head


• 2" dia. stainless steel adjustable height post. 7/8" x 1" dia. stainless steel arms


• 6" diameter threaded stainless flush mount base

• Pro swivel 360° rotating head


• 2" dia. stainless steel adjustable height post


• 7/8" x 1" dia. stainless steel arms


• 6" diameter threaded stainless flush mount base

Height: 34" - 58", Type: Deck Clevis Arm Base, Pkg.: Bulk

Sold: Each

Sea-Dog boat hooks have rubber covered hook area and rubber tip and handle for extra grip. Remove hook tip to screw on brush. Injected molded nylon/aluminum.

Description: 2-Pc Adjustable, Length: 24" - 36", Case: 10

Sea-Dog boat hooks have rubber covered hook area and rubber tip and handle for extra grip. Remove hook tip to screw on brush. Injected molded nylon/aluminum.

Description: 2-Pc Adjustable, Length: 48" - 96", Case: 10

Sea-Dog boat hooks have rubber covered hook area and rubber tip and handle for extra grip. Remove hook tip to screw on brush. Injected molded nylon/aluminum.

Description: 3-Pc Adjustable, Length: 36" - 96", Case: 10

Sea-Dog boat hooks have rubber covered hook area and rubber tip and handle for extra grip. Remove hook tip to screw on brush. Injected molded nylon/aluminum.

Description: 3-Pc Adjustable, Length: 56" - 144", Case: 10