Generic

Boat Size: Up to 35', Chain: 6mm & 7mm

• 100% 316 stainless steel deck unit
• Fall Safe anchor lock
• Fast line speed
• Impact-resistant motor cover
• With reed switch and magnet fitted as standard for chain counter applications
• Fits calibrated chains: 6mm DIN766, 1/4" G4 or BBB, 7mm DIN766
• Kit includes: windlass, base gasket seal, mounting studs, contactor, circuit breaker and rocker switch
• 5 year warranty

Sold: Each

Crank Driven Water Pump Bracket Bracket Only.

Fits 430-68-5001 pump.
Fits the small block Chevy engine.

Beret Soft Mantles, 2 per pack

Aids valve grinding and seating operations to remove burrs, surface defects, carbon, gum, and corrosion. Mixes with water to form an easy to use paste.

Size: 1.5 oz. tube, Case: 12

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 34-1/2", Top Width: 29/64", OEM #: 57-74271T

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 37", Top Width: 29/64", OEM #: 57-65607T

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 40", Top Width: 29/64", OEM #: 57-32850, 57-69143T, OMC 311606

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 41", Top Width: 29/64", OEM #: 57-49043A1, 57-64032A1, 57-98043, Volvo 950813

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 43-1/2", Top Width: 29/64", OEM #: 57-64416, OMC 912509, Volvo 958314, 958359, 958359-2, 966382

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 44", Top Width: 29/64", OEM #: 57-49213A1, 57-45856, OMC 311046

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 45", Top Width: 29/64", OEM #: OMC 914787, Volvo 960336, 3858462

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 45-1/2", Top Width: 29/64", OEM #: OMC 908929, Volvo 3852464

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 46", Top Width: 29/64", OEM #: 57-48120A1, OMC 310953, 909971, Volvo 829207, 950818

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 47", Top Width: 29/64", OEM #: 57-78200A1

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 48", Top Width: 29/64", OEM #: 57-48122

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 52", Top Width: 29/64", OEM #: 57-33170, Q, 57-37619T, OMC 912714

Sold: Each

V-Drive 1" Rudder Quadrant

• Made from 6061-T6 aluminum.
• Standard 1" bore for 1" rudders

Direct replacement for your standard rudder quadrant. Top cable clamp features two milled in scallops to help "bite" into the standard 3/16" cable. Top clamp has a built in clearance when tightened onto steering cable it will be flush with the top surface.

"A convenient one person hitch alignment system with a magnetic base for fast and easy location. Telescoping rods adjust up to 42". Easy to use the first time. 1 Year limited warranty."

Size: 5.88" L x 2.5" W x 15.25" H"

Sold: Each

Type: 90°, Hose: 1/2", Max Hull Thickness: 5/8"