Generic

• Protects Decks from Bounce Buster Damage
• Protects Carpeted Decks from Damage
• Fits Minn Kota Bow Mount Stabilizer Rods
• Fits into Deep Carpet with Pad

"

• Converts any cup holder to an LED accent


• Simple installation - lift cup holder and slide in ring


• Fits cup holders from 3-1/4" - 3-1/2" dia


• Ring contains 18 attractive blue LEDs

• Converts any cup holder to an LED accent


• Simple installation - lift cup holder and slide in ring


• Fits cup holders from 3-1/4" - 3-1/2" dia


• Ring contains 18 attractive blue LEDs

Case: 6

Sold: Each

Use LED Flex-strip rope light under cabinets, shelving, interiors, bars, edge lit panels or any other application you can think of. The lights are super bright and consume very little power. TH Marine rope lights are encased in a waterproof sheath, can be cut to length and are water and moisture resistant. Shorter lengths include hi-strength 3M backing tape for easy mounting. Lengths over 6' do not include adhesive backing and require optional mounting channel.

Lengths: 2', 4' or 6' Color: Blue/White

Flood your boat deck with bright and smooth illumination to make low light or night fishing safer and easier.

• 4 Bright High Intensity 1 Watt LEDs
• Flush Mount Fits into T-Top Recesses
• Provide smooth, bright, even light
• Wide 145° Angle Light Spread
• Die cast aluminum housing, powder coated white
• Optical grade PMMA lens
• Volts: 10-30
• Completely sealed with waterproof rating: IP67

Small flush mounted light is great for stairs, doors and compartments. Hidden fasteners for a clean look.

• Two bright LED's


• Hidden fasteners


• Low, 38 mA power draw

• Two bright LED's


• Hidden fasteners


• Low, 38 mA power draw

Size: 1.8" W x 1" H x .75" D", Bezel: Stainless Steel, LED Color: White

Small flush mounted light is great for stairs, doors and compartments. Hidden fasteners for a clean look.

• Two bright LED's


• Hidden fasteners


• Low, 38 mA power draw

• Two bright LED's


• Hidden fasteners


• Low, 38 mA power draw

Size: 1.8" W x 1" H x .75" D", Bezel: Stainless Steel, LED Color: Blue

Convenience of built-in switch in lens allows you to just push the lens to turn the light on or off.

• Can be surface or flush mounted


• Flush Mount Bezel Included

• Can be surface or flush mounted


• Flush Mount Bezel Included

Size: 5" x 3-1/8", LED Color: White, Volts: 12, Amps: 0.4, Watts: 5

Sold: Each

Great for lighting a small area.

• Super easy Installation - drill a hole and push in


• No nut in back

• Super easy Installation - drill a hole and push in


• No nut in back

Size: 1-1/8" x 3/4", Bezel: Stanless Steel, LED Color: White

Great for lighting a small area.

• Super easy Installation - drill a hole and push in


• No nut in back

• Super easy Installation - drill a hole and push in


• No nut in back

Size: 1-1/8" x 3/4", Bezel: Stanless Steel, LED Color: Blue

These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.

LEDs: 12 White

Sold: Each

"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

Color: Black

"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

• Built-in switch - push lens for "On/Off"


• 12 Volt- 5 Watt - tin wire


• Oval hole - 3 1/4" x 2 1/8"


• Flange overall - 5" x 3 1/8"

Color: White

These surface mount LED utility strip lights are great for lighting or decorating the interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere. The circuit board is completely sealed in epoxy to resist water, corrosion and vibration. Low amp draw for longer battery life. Clear lens provides maximum light.

LEDs: 18 White

Sold: Each

A: 1-5/8", B: 2-5/8", C: 7/8", D: 3/4", E: 1", Pack: Carded

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-1/2", B: 2-1/2", C: 1", D: 3/4", E: 1", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded

Sold: Each

Size: 10" x 20"

"A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage."

:

Sold: Each

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 10"