462-6-500700040 This tool is the easiest way to remove impellers, especially when the pump is mounted in tight, cramped conditions. It removes the risk of expensive damage to the pump or housing and is manufactured from corrosion resistant cast aluminum and stainless steel. Size: "For Impellers up to 2-1/2" Sold: Each
|
|
462-332-AR4 For boats with anchor platform or bow planks and pivoting fluke anchors. Mounts in or under slot to hold anchor under bow plank.
AR4: Small. Strong yet lightweight.
AR5: Medium.k
AR6: Large. Heavy-duty, stainless steel. Self-lubricating bushing. Line Size: 1/2" dia.", Max Chain: 3/8", Max Anchor: 20 lbs., Length: 3", Boat Size: 18'-30'
|
|
462-750-925 - For installing, removing or adjusting transducers
- Starboard marine grade polymer sheets
- Won't warp, corrode or be affected by sunlight
- Mounts with 2 screws (included)
- For installing, removing or adjusting transducers
- Starboard marine grade polymer sheets
- Won't warp, corrode or be affected by sunlight
- Mounts with 2 screws (included)
Size: 3-1/2" x 12", Color: Black Sold: Each
|
|
462-338-ST129060 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 12" x 9", Boat Size: 16'-18'+, Application: 60 to 100 hp / 4 stroke4 / 6 cylinder I/O, Actuator: 60 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-ST129080 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 9" x 8", Boat Size: 18'-22', Application: 150 to 240 hp / 2 or 4 stroke / 8 Cylinder I/O, Actuator: 80 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-ST78020 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 7" x 8", Boat Size: 10'-12', Application: 8 to 15 hp / 2 or 4 stroke, Actuator: 20 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-ST78030 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 7" x 8", Boat Size: 10'-12', Application: 20 to 25 hp / 2 or 4 stroke, Actuator: 30 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-ST98030 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 9" x 8", Boat Size: 12'-15', Application: 30 to 50 hp / 2 or 4 stroke, Actuator: 30 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-ST98040 With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM_x005F_x0010_rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty. Size: 9" x 8", Boat Size: 14'-16', Application: 50 to 80 hp / 4 stroke, Actuator: 40 lb. With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock absorbers to improve stability, eliminate porpoising and chine walk at high speeds, and reduce fuel consumption. Installation can be completed in one hour. Features all stainless steel components, self-contained nitrogen gas actuators sealed with EDPM rubber boot, complete installation instructions and owners manual. 5 year metal component, 2 year actuator warranty.
|
|
462-338-GA500140T Material: Stainless Steel, Rating: 40 lbs.
|
|
462-338-GA500180T Material: Stainless Steel, Rating: 80 lbs.
|
|
462-338-SX951030 The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: Black Composite, Boat Size: 10'-12', Application: 8 to 15 hp / 2 or 4 stroke, Actuator: 30 lb. The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy.
|
|
462-338-SX951040 The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: Black Composite, Boat Size: 12'-16', Application: 40 to 80 hp / 2 or 4 stroke, Actuator: 40 lb. The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy.
|
|
462-338-SX951060 The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: Black Composite, Boat Size: 15'-18'+, Application: 60 to 150 hp / 2 or 4 stroke / 4 or 6 cylinder I/O, Actuator: 60 lb. The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy.
|
|
462-338-SX951080 The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: Black Composite, Boat Size: 18'-22', Application: 150 to 240 hp / 2 or 4 stroke / 8 cylinder I/O, Actuator: 80 lb. The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy.
|
|
462-338-SXW951030BL The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: White Composite, Boat Size: 10'-12', Application: 8 to 15 hp / 2 or 4 stroke, Actuator: 30 lb.
|
|
462-338-SXW951040BL The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: White Composite, Boat Size: 12'-16', Application: 40 to 80 hp / 2 or 4 stroke, Actuator: 40 lb.
|
|
462-338-SXW951060BL The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: White Composite, Boat Size: 15'-18'+, Application: 60 to 150 hp / 2 or 4 stroke / 4 or 6 cylinder I/O, Actuator: 60 lb.
|
|
462-338-SXW951080BL The SX series incorporates fully automatic features with the rust and corrosion free benefits of molded composite materials. The one-of-a-kind Smart Tabs system is speed-regulated, requiring no operator adjustment while underway. The system uses a nitrogen gas actuator which stabilizes your boat without the use of hydraulics or electric switches. Assembly can be completed in seconds and the installation in a few minutes with only a drill with a 3/16" bit and a Phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat, and tracking ribs have been added to improve handling at higher speeds. Thermo Molded CoPolymer composite material provides superior strength and resilience for any rough water situation. Rust and corrosion are also eliminated so there is no need for anodes. Improves handling and smoother ride in any water. Improved fuel economy. Material: White Composite, Boat Size: 18'-22', Application: 150 to 240 hp / 2 or 4 stroke / 8 cylinder I/O, Actuator: 80 lb.
|
|
462-698-BP5012 This pump installs quickly and easily from one side of a bulkhead and is one complete assembly with no additional fittings required. The included foam seal eliminates the need for sealant and the compact size is ideal for limited spaces. Includes quick connect safe-release ports and an integral, robust, comfort-grip handle. Patented diaphragm design ensures easy pump action. Ports: 1-1/2" Sold: Each
|
|
