462-1-HC53803 SeaStar outboard steering
Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Description: Splashwell Mount 125-9
|
|
462-1-PA13152 The SeaStar Power Assist unit virtually eliminates all steering loads on the wheel and reduces steering effort in heavy or high torque applications to reduce driver fatigue and discomfort, just like in a car. It can be installed on new SeaStar installations or as an easy retrofit to existing systems by using an electronically controlled hydraulic pump to provide on-demand power steering. If power is interrupted for any reason, the steering will return to manual operation, but will, of course, be heavier than with the Power Assist activated. Operates on 12V or 24V and can be bulkhead or deck mounted.
Designed for single engine, high performance boats with Seastar Pro steeering.
- Increases steering comfort by reducing effort at the steering wheel
- Easily-installed upgrade to existing SeaStar Pro manual system
- Number of turns lock to lock same as existing manual hydraulic system
- Compatible with SeaStar Power Purge systems
- Compatible with autopilots
- Rugged, reliable and compact
- Wiring harness included
- Ignition protected (SAEJ-1171)
- ABYC, CE, NMMA, ISO 10592
- 12/24V with 15' Harness
|
|
462-1-HH61913 "Teleflex tilt steering delivers unsurpassed performance and flexibility with smooth operation and feel, 48° of tilt, and 5 lock positions. Fits most styled and formed dashes. Preloaded dual taper bearings ensure minimal excess free play. Standard 3/4" tapered shaft." " Improved Seastar Helms (part numbers ending in "3") are now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. " Model: Sport SeaStar 1.7 Sold: Each
|
|
462-1-CC34305 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 5'
|
|
462-1-CC34310 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 10'
|
|
462-1-CC34315 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 15'
|
|
462-1-CC34320 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 20'
|
|
462-1-CC34325 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 25'
|
|
462-1-CC34330 Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle. Length: 30'
|
|
462-1-CC34510 Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals. Length: 10'
|
|
462-1-CC34515 Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals. Length: 15'
|
|
462-1-CC34520 Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals. Length: 20'
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Stainless steel and brass fittings. Fits Volvo engines w/BRP/OMC side mount controls and OMC Turbo Jet gates w/OMC side mount controls that accept OMC "snap in" type cable. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear.
|
|
462-1-061001 Description: Hardware Kit forTwin S Sold: Each
|
|
|
|
|
462-1-039489002 Description: In Series dual station kit - 30 series
(2 required for twin control) Sold: Each
|
|
462-1-047307 Description: Neutral Safety Switch Kit for S Controls Sold: Each
|
|
462-1-HK6400TS3 This popular outboard hydraulic steering system offers smooth, super-efficient steering for high performance hulls with single or multiple outboards up to 700 hp combined. Helm and cylinder now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Application: Single and dual non-power assisted outboard engines up to 350 hp (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center consoles, offshore fishing boats, and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose and fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Hoses sold separately. Features:- 5 turns lock-to-lock with 1.7 helms
- Compact tilt helm
- Complete with helm, cylinder, fittings, oil and bleeder kit
- Standard 3/4" tapered shaft"
Description: Tilt Steering System w/o Hoses This popular outboard hydraulic steering system offers smooth, super-efficient steering for high performance hulls with single or multiple outboards up to 700 hp combined. Helm and cylinder now equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Application: Single and dual non-power assisted outboard engines up to 350 hp (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center consoles, offshore fishing boats, and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose and fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware. Hoses sold separately. Features:- 5 turns lock-to-lock with 1.7 helms
- Compact tilt helm
- Complete with helm, cylinder, fittings, oil and bleeder kit
- Standard 3/4" tapered shaft"
|
|
462-1-HC6845S Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. Teleflex's new patent-pending pivot plate design are reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. There is no cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable. Description: Outboard cylinder, front mount, w/single engine hardware kit Engineered to provide today's high-powered offshore tournament boats and other high-performance vessels with precise, smooth and reliable steering. This heavy-duty cylinder is designed to work with all new and existing Teleflex & Seastar Solutions SeaStar hydraulic helms, providing an instant steering upgrade for a wide variety of boats. Features a rugged design with heavy-duty support brackets, barrel, shaft and seals, together with superior corrosion resistance for serious sea duty. Each cylinder is universal, allowing a variety of mounting configurations, with single, dual or triple cylinder installations to match the outboards on the transom. Independent bleeder fittings allow for better and easier system bleeding compared to tee fittings, especially in multiple engine installations. Each cylinder is equipped with stainless steel ORB elbow fittings that can be easily oriented in any direction for easy and clean rigging of hydraulic steering hoses. The pivot plate design is reversible from left to right and provide smooth articulation and sealed joints for superior performance.The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.
|
|
615-620-38033 These pair of standard seaward risers are from two different production generations. They look slightly different but function exactly the same.
- Available: (1) One Pair
- SOLD AS IS
- NON RETURNABLE
Please study photo carefully, item is sold as shown.
|
|
