Generic

For E10 gasoline, diesel and bio-diesel. For small engines up to 26 gph. Easily install the permanent, pivoting bracket anywhere inside or outside the engine compartment, snap in filter and quick connect and your done. Filter changes are a Snap! When it is time for service simply snap in a new filter, no tools are needed. At less than 4" x 8" the Snapp allows for tight mounting locations and only 2.5" clearance is needed for service.

• Legendary Aquabloc^® filter media
• Clear bowl for instant inspection
• Self venting, quick turn drain for easy service
• Supplied quick disconnect fittings
• Durable glass filled body will not rust
• Permanent, Stainless steel mounting bracket

Description: w/ bracket, GPH: 26, Micron: 10, Ports: 3/8", Size: 3.8" x 7.8" H

For E10 gasoline, diesel and bio-diesel. For small engines up to 26 gph. Easily install the permanent, pivoting bracket anywhere inside or outside the engine compartment, snap in filter and quick connect and your done. Filter changes are a Snap! When it is time for service simply snap in a new filter, no tools are needed. At less than 4" x 8" the Snapp allows for tight mounting locations and only 2.5" clearance is needed for service.

• Legendary Aquabloc^® filter media
• Clear bowl for instant inspection
• Self venting, quick turn drain for easy service
• Supplied quick disconnect fittings
• Durable glass filled body will not rust
• Permanent, Stainless steel mounting bracket

Description: w/ bracket, GPH: 26, Micron: 30, Ports: 3/8", Size: 3.8" x 7.8" H

Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process:
Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage Three: Filtration proprietary Aquabloc^® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.
Turbine series filters are available in sizes to fit any application, are easy to service, are rated for 25psi max pressure, and feature a self-venting water drain. FG & FH models offer a clear, see-thru bowl.

GPH: 60, Micron: 2, Ports: 3/4"-16 UNF", Bowl: Clear, Size: 11-1/2" H x 5.8W x4.8" D"

Sold: Each

Angle: 110°, Tube: 7/8" OD, Description: Bow Form

Angle: N/A, Tube: 1" OD, Description: 3-Way Corner

Angle: N/A, Tube: 7/8" OD, Description: 3-Way Corner

Angle: 60°, Tube: 1" OD, Description: Tee, Universal

Angle: 90°, Tube: 1" OD, Description: Elbow

Angle: 90°, Tube: 1" OD, Description: Tee, Universal

Angle: 90°, Tube: 7/8" OD, Description: Tee, Universal

Angle: 60°, Tube: 7/8" OD, Description: Tee, Universal

Angle: 90°, Tube: 7/8" OD, Description: Elbow

Angle: 60°, Tube: 7/8" OD, Description: Tee, Left

Angle: 60°, Tube: 7/8" OD, Description: Tee, Right

Angle: 90°, Tube: 1" OD, Description: Tee, Hinged

Angle: 90°, Tube: 7/8" OD, Description: Tee, Hinged

"Fits all Danforth and Deepset anchors on pulpit or rail. Unique adjustable clips grip anchor securely. Quick release for emergencies. Anchors up to 35 lbs. are held away from rail, with flukes downward to prevent snagged lines. All stainless. Bracket fits both 7/8" and 1" rails."

Sold: Each

Molded nylon.

A: 3-3/16", B: 3-5/8", Fits: 7/8" - 1" Tubing"

Sold: Each

"Injection molded nylon sockets fit snugly on a 7/8" rail without fasteners and are easily removed when not in use."

Size: 3/8" x 1-11/16", Pack: 1 pr.

Sold: Pack

Pack: 1 pr.