462-781-756015P Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc.
Not for use with flammable or corrosive products.
Can be operated manually or attached to a compressor and features a 40-170 psi working range. Description: Manual/Pneumatic, Capacity: 15L Sold: Each
|
|
462-781-550024 "Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket." HP: 12, Max Load: 85 lbs., Setback: 10-1/8" Sold: Each
|
|
462-781-550010 Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8.-1/2" x 10-1/2" mounting pad. For 2-Stroke motors only, Not recommended for 4-Stroke outboards. HP: Up to 10, Max Load: 80 lbs., Vertical Travel: 14"
|
|
462-781-550012 Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier.Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines. HP: Up to 12, Max Load: 82 lbs., Vertical Travel: 14" with 5 stops Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier.Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
|
|
462-781-550220 Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard BIA bolt pattern, but is drillable for non-standard patterns. Overall size: 16" Wx 13.25 H x 2"D. Support weight is 300HP and 635 lbs. Setback: 2" Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard BIA bolt pattern, but is drillable for non-standard patterns. Overall size: 16"W x 13.25H x 2"D. Support weight is 300HP and 635 lbs.
|
|
462-781-558200 A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Material: Die Cast, Color: Chrome Plated, Length: 3", Pack: 2
|
|
462-781-C558100 "A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use."
Material: Nylon, Color: Fatal Flight Camo, Length: 3", Pack: 2
|
|
462-781-550407AL Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 4-position lock bar allows for installation flexibility for either long or short shaft motors. Max Load: 132 lbs., Rating: 15 hp , Vertical Travel: 10", Type: Aluminum
|
|
462-781-550408SS Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 4-position lock bar allows for installation flexibility for either long or short shaft motors. Max Load: 132 lbs., Rating: 15 to 20 hp, Vertical Travel: 10", Type: Stainless Steel
|
|
462-781-550410 The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 5 vertical running positions. HP: Up to 35, Max Load: 263 lbs., Vertical Travel: 10" The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included.Model 550410: 5 vertical running positionsModel 550416: 4 vertical running positions
|
|
462-781-550416 The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 4 vertical running positions. HP: Up to 35, Max Load: 263 lbs., Vertical Travel: 16" The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included.Model 550410: 5 vertical running positionsModel 550416: 4 vertical running positions
|
|
462-781-757000 Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook. Size: 3/8" x 50', Tensile Strength: 2800 lbs. Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene. Comes packaged with a no-tie rope cleat and snap hook.
|
|
462-781-757010 Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene it has an amazing tensile strength of 2800 lbs. Comes packaged with a no-tie rope cleat and snap hook. Size: 3/8" x 100', Tensile Strength: 2800 lbs. Panther anchor rope is manufactured with the outdoorsman in mind. Made from heavy duty blue polypropylene. Comes packaged with a no-tie rope cleat and snap hook.
|
|
462-781-756025 These compact, powerful pumps make oil changes fast, efficient and cleaner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Both have nonkinking, flexible metallic extractor tubes.
756025: Downsized 2.5-liter, perfect for four-strokes up to 50 hp and sailboats with small engines.
Note: Not for use with flammable products. Capacity: 2.5L Sold: Each
|
|
462-781-756060 These compact, powerful pumps make oil changes fast, efficient and cleaner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Both have nonkinking, flexible metallic extractor tubes.
756060: Has a large 6-liter capacity to meet the needs of most boaters.
Note: Not for use with flammable products. Capacity: 6.0L Sold: Each
|
|
462-781-755000 Easy to use inboard motor flusher. Great for winterizing, maintenance or anytime you need to run your inboard engine while out of the water. Just connect the garden hose, fit the cup over the water intake and extend the leg to seal the cup to the hull. Constructed of aluminum and heavy duty rubber. Connects to a standard garden hose. Length: 19" to 30-1/4", Case: 24 Sold: Each
|
|
462-781-758201 - Polished 316 stainless steel high security key locks with anti-drill protection secure outboards to your boat.
- Noise dampeners reduce rattle
- Each lock includes two keys, which cannot be duplicated without 4 digit key card (also included)
Finish: Polished Stainless - Made from 300 series marine grade stainless steel high security key locks with anti-drill protection secure outboards to your boat.
- Noise dampeners reduce rattle
Each lock includes 2 keys, which cannot be duplicated without 4 digit key card (also included)
|
|
462-781-KPP801 + Option(s) Convenient shallow water anchoring systems for a quick, no maintenance way to hold the boat in position. Quickly anchor in shallow water without heavy anchors and wet, cumbersome ropes. Ideal for precision bait presentations especially in windy conditions or where currents are present. No power, no switches and no wires. King Pin is the perfect alternative or complement to power actuated pole anchors.
Signature Anchor Pole Lock: All anchor brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket, while eliminating loose parts that can fall in the water.
Description: 1-Pc Poles, Length: 8', Finish: Black or White
|
|
462-781-KPP802 + Option(s) Convenient shallow water anchoring systems for a quick, no maintenance way to hold the boat in position. Quickly anchor in shallow water without heavy anchors and wet, cumbersome ropes. Ideal for precision bait presentations especially in windy conditions or where currents are present. No power, no switches and no wires. King Pin is the perfect alternative or complement to power actuated pole anchors.
2pc poles: Feature a 'Pool Cue' style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of ?" dia., high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while facilitating easy bottom penetration. Rubber storage clips included.
Length: 8', Finish: Black, Camouflage or White
|
|
462-781-KPP100 + Option(s) Convenient shallow water anchoring systems for a quick, no maintenance way to hold the boat in position. Quickly anchor in shallow water without heavy anchors and wet, cumbersome ropes. Ideal for precision bait presentations especially in windy conditions or where currents are present. No power, no switches and no wires. King Pin is the perfect alternative or complement to power actuated pole anchors.
2pc poles: Feature a 'Pool Cue' style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while facilitating easy bottom penetration. Rubber storage clips included.
Length: 10', Finish: Clear Anodized, Color: Black or White
|
|
