137-8075 ORB -5 Male Port to -4 Male JIC Adapter
|
|
625-1434 O-Ring Only, for Old Style Gil Marine 8 Bolt Sea Strainer Lid
Note: Replacement part for 420-913270 Old Style Gil Sea Strainer Lid. ONLY fits this style lid.
|
|
260-OCORK O-Ring Reseal Kit Replacement O-Ring kit for all Olsen 260-OC Series Oil Coolers
|
|
625-1206 O-Ring, For 1/2 Shaft, Sea Strainer Lid
Note: Replacement part for 620-913245 sea strainer.
|
|
625-1212 O-Ring, Replacement part for 620-336178 sea strainer.
|
|
|
|
|
625-1134 O-Ring, Inlet/Outlet Block
|
|
625-1435 O-Ring, Sea Strainer Lid
Note: Replacement part for 620-913245 sea strainer and the 420-913222 sea strainer.
|
|
462-47-6844 These all NEW replacement alternators meet OEM specs and meet or exceed OEM output for guaranteed performance. Fans, pulleys and hardware are plated to resist corrosion and special marine flame arrestor screens eliminate open sparks which can cause explosions and fire. Wiring harnesses are supplied as required by application for ease of installation. All alternators are fully backed by the Sierra warranty.
See Sierra's catalog for current application information. Type: New, Fits: Mercury/Denso, OEM #: 834832, 834832T2, 857006A3/ 101211-3460 Sold: Each
|
|
462-371-74038 "Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)" Description: 1/2-13 Johnson/Evinrude 40+ hp (2-stroke), Finish: Stainless Sold: Each
|
|
462-371-74036 "Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)" Description: 1/2-20 Merc/Mariner 40+ hp (2-stroke), Merc 25+ hp (4-stroke), Suzuki 150-300 hp, Finish: Stainless Sold: Each
|
|
462-371-74037 "Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)" Description: M12 x 1.25 Yamaha 40+ hp (2-stroke), 30+ hp (4-stroke), Honda 40+ hp, Suzuki 25-140 hp (2005 & newer), Finish: Stainless Sold: Each
|
|
462-220-OML0127 Mounts over outboard mounting clamp handles. Made of heavy gauge steel with long lasting black powder-coat finish for years of protection against rust and corrosion. Foam filler insert reduces noise and vibration. Mounts on most outboard motors. Finish: Black Powder Coat Sold: Each
|
|
462-232-MSS1DP Fits over trim rams
Supports outboard while trailering
Takes the pressure off of hydraulic system
Most outboards 150 hp and up
Strong aluminum tubing with molded ends
Safe for salt or fresh water - Fits over trim rams
- Supports outboard while trailering
- Takes the pressure off of hydraulic system
- Most outboards 150 hp and up
- Strong aluminum tubing with molded ends
- Safe for salt or fresh water
Description: 0, Pack: 1 pr. Sold: Pack
|
|
462-57-SR367 "For Mercury/Mariner-Fits:
'86-96/6-15 HP
'80-'03/18-25 HP
2 1/2" motor casing
10-tooth drive gear" Description: Brush holder assembly Sold: Each
|
|
462-57-5393 Replaces: Chrysler 50-F616955-1, F616955-1
Force 480955, 490955, 50-819085, 50-853869, 616955, 50-853869, 50-853869T, 50-898265002
9-tooth drive gear - Replaces: Chrysler 50-F616955-1, F616955-1
- Force 480955, 490955, 50-819085, 50-853869, 616955, 50-853869, 50-853869T, 50-898265002
- 9-tooth drive gear
Type: New Sold: Each
|
|
462-57-5394 FORCE - Fits:
- 1996-1999 40-50 HP
- 13 tooth drive gear
**Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the bottom).**FORCE - Fits:- 1996-1999 40-50 HP
- 13 tooth drive gear
Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the bottom).Type: New Sold: Each
|
|
462-57-5397 Fits: FORCE
- 1992-1995, 40 HP
- 1992-1995, 50 HP
- 13 tooth drive gear
**Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the side).**Fits: FORCE- 1992-1995, 40 HP
- 1992-1995, 50 HP
- 13 tooth drive gear
Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the side).Type: New Sold: Each
|
|
462-57-5388 For Mercury-Fits:
50-60 HP, 3-cyl
1991-1996 45 HP Jet
10-tooth drive gear For Mercury-Fits:50-60 HP, 3 cyl1991-1996 45 HP Jet 10-tooth drive gearType: New Sold: Each
|
|
462-57-5389 FOR O.M.C. - Fits:
1989-up 25, 40, 50, 2 cyl.
1990-up 48-50 HP
9 tooth drive gear FOR O.M.C. - Fits:- 1989-up 25, 40, 50, 2 cyl.
- 1990-up 48-50 HP
- 9 tooth drive gear
Type: New Sold: Each
|
|
