Generic

Injection molded nylon.

Description: Double Wing, A: 1-11/16", B: 5/8", C: 3/16", D: 1/16", Pack: 1 pr.

Sold: Pack

"Weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".

Material: Molded Nylon, Length: 3-1/2", Pack: 2

Fits: Good automatic windlass
Replaces: Prestolite: EVH4001, ESP4001
3 wire connnection

Type: New

Sold: Each

Stamped 304 stainless steel.

A: 2-1/8", B: 1/2", C: 5/8", D: 1-1/2", E: 5/8", Fastener: #10 FH

Sold: Each

A: 3-3/16", B: 13/16", C: 7/8", D: 2-3/16", E: 15/16", Fastener: 1/4" FH

Style, refinement, meticulous design and amazing performance. Machined from billet 6061-T6 Aluminum and manufactured and hand finished in the USA. The appeal of this light starts long before it is even turned on, but when it's on, it's on! - with 1,000 darkness-piercing lumens to get you to the party, or back, safely. For exceptional output, rock-solid reliability, and distinctive styling nothing comes close.

Lumens: 1000, Size: 3.7"W x 3.95"D", Volts: 10-30, Amps: 1.3@12V

Sold: Each

"Sierra push pull switches feature solid brass construction with stainless steel springs. 3/8" Diameter mounting stem fits panels up to 1" thick. 15 amp @12VDC, 25A @24VDC.
MP39400: used to control the same circuit from two locations.
MP39600: energizes two separate circuits in the ON position.
MP39640: first pull energizes circuit 1, second pull energizes circuit 2.
MP39570, MP39580, & MP39590: first pull energizes circuit 1, second pull energizes circuits 1&2.
MP39610 & MP39620: first pull energizes circuit 1, second pull energizes circuits 2&3."

Description: Off/On (1)/On (2&3), Type: SPDT, Terminals: 4 Screw, Knob: Chr/Plastic

Sold: Each

10A at 12V DC. Silver contacts. Chrome plated brass handle. Mounting stem and face nut are nickel plated brass. Keyway is in the down position. SPST. Handle is 11/16" long. Mounting stem is 15/32"-32 thread, 15/32" long. Fits panels up to 1/4" thick.

Positions: On/Off, Terminals: 2 6" Wire, Type: SPST

10A at 12V DC. Silver contacts. Chrome plated brass handle. Mounting stem and face nut are nickel plated brass. Keyway is in the down position. SPST. Handle is 11/16" long. Mounting stem is 15/32"-32 thread, 15/32" long. Fits panels up to 1/4" thick.

Positions: On/Off, Terminals: 2 screw , Type: SPST

"2 circuits. Normally off. 3 positions: Off - On #1 & #2 - On #1 & #3. Knob face dia.: 3/4". Especially suited for multiple lighting circuits such as cabin, anchor and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded."

Positions: Off/On/On, Type: SPDT, Terminals: 4 Screw, Pkg.: Retail

Sold: Each

"2 circuits. Normally off. 3 positions: Off - On #1 - On #1 & #2. Knob face dia.:3/4". Ideal for control of lighting circuits such as cabin and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded."

Positions: Off/On/On, Type: SPDT, Terminals: 3 Screw, Pkg.: Retail

Sold: Each

Stainless Offset Butt Hinge
A: 1-1/2", B: 3/4", C: 3/4", D: 1-1/2", E: 1/16", F: 3/8"

A: 2-1/8", B: 5/8", C: 1-1/2", D: 1-1/2", E: 3/16", F: 3/8"

Size: 1-1/2" x 1-1/2", Pack: 2

Material: Chrome Zinc, Size: 2-1/2" x 1-1/2", Pack: 2

Toss it in the bilge, and it soaks up oil and gasoline, but repels water. The bilge water can then be pumped overboard legally.

Size: 7" x 15", Capacity: .5 Gallons/Pad, Case: 16

Sold: Each

"Consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves. This system includes a pump reversing switch to pump used oil out and new oil in, the cover includes a hinged valve cover to protect them from being accidentally opened, and the valve cover will not close after an oil change unless valves are securely closed. Complies with USCG 183.410 and ISO 8846 Marine (ignition protected). Ball valves - 1/2" NPT. 12 Volt DC, fuse 15 amp."

Size: 5-1/4" H x 10-7/8" W x 11" D", Volts: 12

Sold: Each

Total length 42 inches.

Description: "For GM, Chrysler & Most Ford oil pans - 1/2" 20 Threads"

Sold: Each

Fits: Johnson/Evinrude - 60-75 hp, 3 cylinder, 20-35 hp ('85-'97), OMC Sterndrive/Cobra - V4 & V6 ('79 & Newer), OEM # 307551, Drain Screw: Gasket

Sold: Each

Fits: Mercruiser Alpha MR/Gen II lower units. OEM # 10-14834A1, 22-67892A1, Drain Screw: Magnetic Drain Screw

Sold: Each