This Part has options, please click the button below to order.
542-15799 - 13 3" x 13" Westerbeke Heat Exchanger
This part has two configurations sold as the 15799-13 and 15799-15.
One is 13 inches and one is 15 inches (15799-15) and the hose configurations are quite different. They assuredly are NOT interchangeable.
|
|
This Part has options, please click the button below to order.
542-130-6549 CN 3" x 14" Onan Heat Exchanger
Fits: MDKBS
|
|
This Part has options, please click the button below to order.
542-15799 - 15 3" x 15" Westerbeke Heat Exchanger
This part has two configurations sold as the 15799-13 and 15799-15.
One is 13 (15799-13) inches and one is 15 inches and the hose configurations are quite different. They assuredly are NOT interchangeable.
|
|
This Part has options, please click the button below to order.
542-45374 CN 3" x 16-1/4" Westerbeke Heat Exchanger
|
|
This Part has options, please click the button below to order.
542-46786 3" x 18" Westerbeke Heat Exchanger
|
|
This Part has options, please click the button below to order.
542-46786CN 3" x 18" Westerbeke Heat Exchanger CuNi
|
|
This Part has options, please click the button below to order.
542-19058 3" x 19-1/2" Westerbeke Heat Exchanger
- Westerbeke W60 Propulsion / WPDS-20 Generator 4-154 Cooling System.
- Overall length is 3X20 without end caps.
- FW/Glycol fittings are 1-3/8"
- Glycol fittings 7/8 Hose and 3/4NPT female for seawater fittings.
- It fits the 18 21A 27A 33A 38A w/ mounts.
|
|
462-88-4203000 Used for venting bilge gases and fumes. Where durability and long service life is required. Heavy gauged black PVC hose supported by vinyl coated helical wire. Resistant to ozone, sunlight and weathering. ID: 3", Length: 50' Shields Extra Heavy Duty Vinylvent has an extra heavy PVC wall. It is supported by vinyl coated helical wire and is resistant to ozone, UV, and corrosion. Flame resistant and meets the UL 94V standard. This hose is primarily used for venting of bilge fumes.
|
|
462-88-4023000 Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. ID: 3", Length: 50', Color: Black Vinylvent ducting hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
|
|
462-88-4003000 Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes. ID: 3", Length: 50', Color: White Vinylvent ducting hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
|
|
This Part has options, please click the button below to order.
542-3975986CN 3" x 9" Cummins Oil Cooler
|
|
462-383-1200256 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 3" x 3" x 4", Length: 14" Sold: Each
|
|
462-383-1200161 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 3" to 3-1/2", Length: 9-1/2" Sold: Each
|
|
462-383-1200111 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 3-1/2", Length: 10-1/4" Sold: Each
|
|
462-189-1013395103 "These 5-chamber diaphragm pumps feature dramatically lower noise and water pulsation compared to 3- or 4-chamber designs. They are self-priming to 6.5' (8.2' for 5.2 gpm model), have an integrated pressure switch and can run dry without damage. Use an inlet strainer before pump intake. Accumulator tanks are recommended. Connections for 3/8" NPT, 1/2" hose and 1/2" NPT, 3/4" hose." GPM: 3.5, Volts: 12, Amps: 7.5 Sold: Each
|
|
462-218-G1B - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 3.5" x 12.8", Color: Blue, Boat Size: Up to 15', Case: 12
|
|
462-218-G1W - Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
- Even wall thickness for maximum strength
- Molded in ribs for strength and abrasion resistance
- Reinforced rope holds
- Designed for use by trailered boats and permanent protected moorings
- Unique Polyform valve for years of service
Size: 3.5" x 12.8", Color: White, Boat Size: Up to 15', Case: 12
|
|
462-383-1000105 They are the original and most copied FRP wet muffler in the marine industry. Designed for gasoline or diesel engines, minimizes added back pressure, and will not rust or corrode. Constructed of fire retardant, self extinguishing resins. For use above the waterline. Ports: 3-1/2", Dia.: 8.09", Length: 30.00" Sold: Each
|
|
462-383-1200222 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 3-1/2" to 4", Length: 10-1/2" Sold: Each
|
|
462-354-147054 Cast Stainless Steel Bow Shackle A: 3/16", B: 5/16", C: 9/16", D: 11/16", Pkg.: Bulk Cast 316 stainless steel.
|
|
